Parts for Frigidaire FGTR1837TE2: Doors Parts

Fix frost buildup and warm freezer temperatures with this magnetic door gasket. Creates an airtight seal to lock in cold air and keep moisture out.

Creates an airtight seal to prevent warm air from entering your freezer. Replace if you notice frost buildup, ice formation, or detachment. Verify fit by model.

Refrigerator door gasket creates an air-tight seal to prevent temperature loss and maintain proper cooling. Replace if cracked, torn, or loose.

Replaces worn fresh food door seal to restore airtight closure, prevent condensation, and reduce energy loss. Replace when torn, warped, or gapped.

The Dairy Door is an OEM replacement part for  Frigidaire side-by-side refrigerators. Located inside the fresh food compartment, it provides a dedicated storage area for milk, yogurt, cheese and other dairy products requiring colder temperatures. The door measures approximately 9 inches wide and 5 inches high.

Causes of a bad dairy door include normal wear from repeated opening and closing over time. Exposure to spills inside the refrigerator can also potentially damage door shelf components or seals.

Symptoms of a bad dairy door are: 

• Difficulty opening or closing the door smoothly  
• Door alignment issues where it does not sit flush in the frame
• Leaks or moisture inside the dairy storage area
• Damage or cracks in shelf supports or gasket seals

This OEM part is also compatible with models from brands like Electrolux, Gibson, and Kelvinator brand models.

NOTE: For white use 240337701

This small black plug/button covers a hinge or bearing access hole to restore a finished appearance and help keep out dirt and debris. It's a simple, inexpensive trim piece that maintains the appliance's look and helps protect internal components. What it does:

• Covers exposed hinge or bearing access holes for a clean, finished appearance
• Helps keep dust and debris out of hinge or bearing cavities
• Prevents snagging and reduces the chance of small items entering the opening
• Matches factory appearance and fit for a seamless repair

• Push-fit design; press into the hole until fully seated
• Keep away from small children — small part is a choking hazard

Control panel button won't respond? This push button restores tactile control on your refrigerator. Snaps into place for a factory-fit repair in minutes.

This outer freezer door panel restores the sealed front surface of your freezer and helps maintain proper cold retention and appearance. It replaces a damaged, dented, or cracked freezer door to help the compartment cool efficiently. What it does

• Replaces the exterior freezer door panel to restore a proper seal and barrier between freezer interior and kitchen air.
• Helps prevent cold air loss that can cause frosting, temperature fluctuations, or overworked compressors.
• Restores structural integrity and appearance when the original door is dented, cracked, or warped.
• Works with existing hinges, gaskets, and trim when those components are undamaged.

• One outer freezer door panel.

• High-level install: remove interior contents and ice buildup, support door weight, disconnect any wiring or trim as applicable, then unbolt old door and mount replacement.
• Handle and hinge hardware may need to be transferred from the original door.
• Always unplug the appliance before starting repair and use proper lifting support to avoid injury or damage.
• If the gasket, hinges, or internal components are damaged, replace those parts as needed for a complete repair.

Complete freezer door assembly for top-mount refrigerators. Replaces cracked, damaged, or broken freezer doors. Includes hinge attachment points.

Outer door panel for refrigerator freezer compartment. Replaces cracked, dented, or damaged exterior door surfaces. Restores appearance and protects insulation.

This refrigerator nameplate displays model information, specifications, and branding on your appliance's exterior. It provides important identification details for service and warranty purposes. Replace if the nameplate is missing, illegible, or damaged to maintain proper appliance identification.

Refrigerator door stop that prevents the door from swinging too far open. Replace if cracked, broken, or missing to protect cabinet and door hinges.

Replacement door stop for top-mount refrigerators. Installs on the door to prevent overextension. Replace if cracked, broken, or missing.

Limits refrigerator door opening range to prevent overextension and hinge damage. Replace worn or broken stops to restore controlled movement.

Plastic door stop that cushions refrigerator door closure and prevents impact damage to walls or cabinets. Replace if cracked, broken, or missing.

Black plug button that covers exposed holes or openings in refrigerator doors and panels. Restores a finished look and keeps dirt out of unused mounting holes.

Gray plastic plug button that covers screw holes on refrigerator exterior panels. Replace missing, cracked, or discolored plugs for a clean finish.

Color: White

Complete refrigerator door assembly for top-mount models. Replaces cracked, damaged, or worn doors that no longer seal properly or have broken hinges.

Complete refrigerator door assembly that installs on the cabinet frame. Replace a cracked, dented, or damaged door to restore your unit's appearance.

This stainless-steel refrigerator door replaces a damaged or dented outer door to restore appearance and proper sealing. It provides the exterior panel and mounting surfaces needed to secure door trim, handle, and gaskets. What it does:

• Replaces the outer fresh-food door panel so the fridge closes evenly and looks like new
• Restores the mounting surface for handles, trims, and door gaskets
• Helps stop air leaks caused by bent or dented doors, reducing moisture and temperature issues
• Addresses visible dents, scratches, corrosion, or cosmetic damage to the exterior

• One stainless-steel refrigerator outer door panel

• Disconnect power and empty door contents before removal to prevent tipping or injury
• Retain and transfer existing handle, trim, hinge hardware, and gasket unless replacements are supplied
• Inspect hinges and seals during installation; adjust alignment to ensure a proper door seal

Stainless steel door handle kit for top-mount refrigerators. Replace cracked, broken, or worn handles or upgrade from white to stainless finish.

Stainless steel door handle kit for top-mount refrigerators. Replace cracked, broken, or worn handles or upgrade from white to stainless finish.

Replace your refrigerator's broken or cracked door handle. This exterior handle installs on the freezer or fresh food door for smooth opening and closing.

Replacement door handle for top-mount refrigerators. Installs on the refrigerator or freezer door. Order if your handle is cracked, broken, or loose.

Black handle kit for refrigerator doors. Includes handle and mounting hardware. Replace cracked, broken, or worn handles from frequent use.

Black handle kit for refrigerator doors. Includes handle and mounting hardware. Replace cracked, broken, or worn handles from frequent use.

Replacement mounting screw for refrigerator panels, trim, and brackets. Needed when original screws are missing, stripped, or damaged during repairs.

Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.

The Screw Kit is an OEM part for Frigidaire appliances. It contains various screws specifically designed to fit and secure different components of Frigidaire appliances, ensuring a tight and secure assembly. This kit is essential for both initial installations and for making repairs or replacements to existing appliances, providing the necessary hardware to maintain or restore the structural integrity of your appliance.  These screws are #10-16 x .500 inches long and can be loosened or tightened using either a Phillips-head or square-head screwdriver.

Symptoms of needing a new Screw Kit include:

• Loose components or panels on your appliance due to missing or damaged screws.
• Inability to securely fasten parts during assembly or repairs, which can lead to operational issues or safety hazards.
• Screws stripping or corroding over time, which can compromise the stability and durability of the appliance.

Causes for replacing screws can include mechanical stress that causes screws to loosen or fall out, environmental factors like moisture leading to corrosion, or accidental damage during cleaning or maintenance.

This screw kit is designed to be universally compatible with various Frigidaire models, ensuring that you have the right screws for a range of repair needs.

Nylon bearing that fits on the door hinge pivot point. Replace when worn, cracked, or missing to prevent door sagging and alignment issues.

Replacement door shelf bin for refrigerator doors. Installs on door to store condiments and bottles. Order if your original bin is cracked or broken.

Replace your cracked, broken, or missing refrigerator door bin. This shelf installs on the door to hold bottles, jars, and condiments securely in place.

Replace your cracked, broken, or missing refrigerator door bin. Snaps into place on the door interior for storing condiments, jars, and bottles.

Replace your cracked or broken freezer door bin. This shelf installs on the inside of your freezer door for adjustable storage. Easy snap-in replacement.

This part number contains one (1) screw.

Secures door handle to refrigerator door. Replace if missing, stripped, rusted, or corroded from regular use. Essential hardware for handle installation.

This is a service wrench used to loosen and tighten appliance fasteners for maintenance and repairs, making access and part replacement easier for technicians and DIYers. Durable tool designed for specific appliance fastener sizes. What it does:

• Provides the correct fit and leverage for removing or installing designated appliance nuts, bolts, and fittings
• Helps safely access internal components during service and part replacement
• Reduces risk of rounding fasteners compared with improvised tools
• Useful for routine maintenance tasks and repair procedures that require a dedicated wrench

• One wrench

• Use the wrench only for its intended appliance fasteners; avoid excessive force
• Disconnect power and water to the appliance before beginning service
• Wear safety gloves and eye protection when working on appliances