Parts for Whirlpool WFW95HEXL1: 01 - Top And Cabinet Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Replace your washer's top panel if cracked, dented, or damaged. This exterior cover installs over the cabinet to restore the cosmetic appearance of your machine.

Exterior upper cover panel for washers. Restores a finished look and protects internal components. Replace if cracked, dented, or damaged from impact.

Replaces cracked, faded, or damaged washer control panel. Restores appearance and houses control buttons. Protects internal electronics from wear.

The Outer Door Boot Seal Clamp Washer is an OEM replacement part specific to Whirlpool-brand washing machines. Multiple washers are used behind the outer boot seal clamp to create a uniform, compressed seal around the washer door opening. 

Symptoms of worn or damaged clamp washers include:

• Water leaks occurring around the outer door seal 
• The door not sitting flush or sealing tightly when closed
• Water intrusion indicated by interior mold/mildew buildup

Causes may involve deterioration of clamp washer material over extended washing machine use cycles. Washers crack or fail to adequately cushion and compress the door seal.

The part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is the service tech sheet for the appliance. It provides wiring diagrams, diagnostic information, and troubleshooting procedures to help accurately identify and resolve performance issues.

• Contains official diagnostic steps and wiring information
• Helps trace error conditions and electrical problems
• Useful when the unit won't start, won't run cycles, or shows fault codes
• Supports accurate troubleshooting to reduce guesswork

• Disconnect power before servicing the product.
• The sheet is typically stored inside the appliance (often behind an access panel or in the door area).
• Handle with dry hands; avoid smudging or tearing diagrams.
• Re-secure in its original location for future service reference.

This replacement screw secures appliance components and panels so they stay aligned and rattle-free during operation. Replace stripped, missing, or corroded hardware to restore a tight fit and dependable performance. What it does

• Fastens brackets, panels, and internal sub-assemblies in the appliance
• Helps maintain alignment to reduce vibration and rattling
• Replaces missing, rusted, or stripped screws that no longer hold
• Useful when a part won't mount securely or a screw backs out during use

• One screw

• Disconnect power; for gas appliances, also shut off the gas supply
• Compare to the original for length and thread style for the location
• Start threads by hand to avoid cross-threading; use the correct driver bit
• Do not overtighten; if the mounting hole or clip is worn, replace it

The Motor Control Board is an OEM part for Whirlpool washing machines. This electronic board is responsible for regulating and controlling the motor's speed and direction during various cycles, ensuring optimal washing performance.

Over time, the motor control board can fail due to electrical issues, power surges, or general wear and tear. When the control board malfunctions, it can disrupt the washing machine's operation and lead to various performance issues.

Symptoms of a bad motor control board include:

• The washer not spinning or agitating
• Erratic or unpredictable cycle times
• The washer stopping mid-cycle
• Error codes related to motor function

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Shipping bolt kit secures the drum during transport or when laying washer on its side for pedestal installation. Replaces lost or discarded bolts.

This is a replacement screw designed to work with a wide range of household appliances. It is used for many purposes in these appliances, from holding body panels together to securing electronics into control boards. However, screws are subject to damage through corrosion, impact, and improper installation/removal. In most cases, the primary damage to this screw is through corrosion – it may become rusted or corroded in place, depending on the appliance and the maintenance provided during its lifespan. The screw may also be stripped or rounded due to improper removal or installation. If the screw is damaged, lost, or corroded in place, it will need to be replaced. In most cases, removal will require nothing more than a Phillips head screwdriver or the appropriately sized socket with a ratchet. However, if the screw is damaged, it may require a tap set to remove it from its mounting location. Note that this is a genuine OEM replacement screw made from durable, high-quality metal, and is sold individually. It fits Whirlpool, Maytag, Roper, Estate, Amana, Crosley, and Thermador appliances. It is used in over 150 machines, ranging from washers and dryers to air conditioners.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Fixes loose or unresponsive control buttons by securing the press switch to the panel. Quick 5-minute repair restores reliable button operation.

Noise filter (line filter) that suppresses electrical interference on the washer power line. Protects electronic controls from power surges and reduces EMI. Replace if washer has intermittent operation or won't start.

Fix F35 error codes or incorrect fill levels with this washer water level pressure switch. Senses water height to control filling. Easy DIY fix.

The Pressure Switch Hose is an OEM part for Whirlpool washing machines. This hose connects the pressure switch to the washer tub, allowing the machine to detect water levels and ensure proper operation of the washing cycle.

Common causes of damage include cracks, holes, or clogs in the hose, which can occur due to wear and tear, exposure to harsh detergents, or foreign objects in the washing machine. 

Symptoms of a bad pressure switch hose include:

• The washing machine not filling properly
• Overfilling or underfilling of water
• Error codes related to water levels
• The washer not advancing through cycles correctly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Small mounting clip that secures internal components in your laundry center. Replace if broken, missing, or worn to restore proper panel alignment.

Mounting bracket secures panels and components in your laundry center. Replace if cracked, broken, or missing to restore stability and prevent rattling.

The Spring Tension Hose Clamp is an OEM part for Whirlpool washing machines. It is designed to secure hoses in place, preventing leaks by maintaining consistent tension on the hose connections.

Over time, spring tension hose clamps can lose their effectiveness due to metal fatigue, corrosion, or damage from frequent tightening and loosening. This can lead to leaks and improper hose connections.

Symptoms of a bad spring tension hose clamp include:

• Water leaks around hose connections
• Loose or disconnected hoses
• Unusual noises or vibrations during operation
• Water pressure issues within the washing machine

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Secures U-shaped drain hoses or heating elements in washers. Replace if cracked, broken, or missing to prevent hose movement and potential leaks.

Flexible drain hose routes water from washer tub to household drainage. Replace if cracked, leaking, or deteriorated from age and flexing wear.

Replacement power cord for your washer. Installs between appliance and wall outlet. Replace if original cord is damaged, frayed, or cracked.

Size: 10-24 x 3/8 inch.

Cap cover for washer top panel or control area. Replaces cracked, broken, or missing covers. Snaps into place to complete cabinet appearance.

Transport cover bracket that secures washer components during shipping and service. Replace if cracked, broken, or missing to prevent damage during moves.

Replacement mounting screw for washer and laundry center units. Secures components and panels. Order if your original screw is stripped, lost, or damaged.

Size: 5 foot long. Rubber fill hose used on most automatic washing machines. Two hoses used per machine.

Rubber washer gasket for washer fill hose connections. Replace if worn or leaking at coupler adapter. Measures 1-1/16 x 5/8 inch. Verify fit with model.

The Front Leveling Foot is an OEM part for Whirlpool washing machines. It is designed to support and stabilize the washer by allowing users to adjust the height and level the appliance on uneven floors. Proper leveling ensures smooth operation and minimizes vibrations and noise during wash cycles.

Causes of a bad Front Leveling Foot can include physical damage from excessive force, wear and tear from frequent adjustments, or corrosion due to exposure to water or laundry chemicals. Over time, these factors can compromise the foot’s ability to maintain stability, leading to operational issues.

Symptoms of a bad Front Leveling Foot include:

• The washing machine rocking or wobbling during operation
• Increased vibration and noise
• The washer being unlevel, affecting wash performance
• Difficulty in adjusting the foot

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This locking nut is used for many purposes on a range of machines including household appliances. This nut is often used for leg leveling for machines. It will help with vibrations from washers and dryers. If the nut is used for this purpose and goes missing or becomes damaged, it could cause the machine to vibrate more and seem louder.Nuts are made from metal and are built to last a long time. However, there can still be issues that arise. In some cases, the nuts might go missing if they become loose and the machine is moved. They could also corrode over time and need to be replaced. The replacement of the nut is typically a fast and simple repair.The nut is a genuine OEM replacement part sourced from the manufacturer. It can work with washers, dryers, and combo machines, and is compatible with models from Whirlpool, Kenmore, Maytag, and Roper. The part is sold individually. Owners may want to have several on hand.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.