Amana Dishwasher Dishrack

My discharge would not empty after a wash cycle and I always had gross gray water left in the bottom approx 3" deep? After doing the obvious things of checking the simp for garbage, and checking that the discharge hose wasn't blocked, I removed my discharge pump ( not too hard to do) and tested. My pump which did run and turn the impeller. However, the pump evidently had weakened with time and weakened and could no longer pump the waste water up hill to the "T" connection under the sink. A... Read more

Dishes were 'gritty' with an almost invisible coating of specks smaller than grains of salt. Prior to ordering parts, I had to determine which part(s) needed replaced and which could benefit from a good cleaning. After viewing Appliance Parts Pros YouTube Videos, I removed the Main Manifold (snaps right off) including the Top Spray Arm. I discovered the Flappers of the Docking Station (AP6009888) were worn out and/or missing. I removed the Docking Station simply by popping the old one off... Read more

Replaced the lower rack Read more

Ordered the parts and followed the instruction videos that Sears provide, Initially tried to order parts from Sears directly but the web-page kept complaining about my shipping address. Their loss- no wonder they're going out of business. Also, should note that the original assembly was plastic but the replacement was metal. Sure sign of a crappy cost-cutting decision. Overall, very happy with Appliance Parts Pros! Read more

Ordered new top rack and changed out the rusty one. Taking the washer arm off the old one and putting it on the new one was a bit challenging but my husband is good with those things and it went well. Beware that NO instructions come with the rack and there is a bagful of parts that are probably if you want to change rollers or something. Read more

Ordered new frame, wheels and SS slide for the bad side. Job was done in 10 minutes and the rack now works smoothly. Read more

Used the vinyl touch up paint on the tops of posts and slid vinyl tips over 130 posts. The paint acts as an adhesive to keep the tips secure. Read more

This isn't going to be easy to follow without an assembly at hand and in front of you. Having purchased and received a pair of replacement clips (though only one of mine was actually broken), I began to figure out how to put the assembly back together not having recalled how I'd taken it apart. It was a bit of a Chinese puzzle that I solved with some trial, error and patience. The 1st ah-ha moment came when I realized that the orientation of the rack was constrained by its dimensions, the... Read more

Ordered dishwasher rack tine tips and bottle of vinyl touch up paint. I applied the paint to each tine and then placed the tips on the tines. I waited a few hours before using my dishwasher to allow the paint to dry and allow the tips to stick to the tines. Read more

This is my 3rd control panel for this dishwasher. I've become somewhat of an expert fixing this flawed board. A star screw driver and a nut driver are all you need. Read more

Bought a new one that you had available. Best reliable source I have found to date. Read more

Replaced it with the modern replacement you provided. Now I have a repair kit, spare rollers, a foldable rack of tines and all the related parts put back for repair if necessary. A win win scenario. Thanks for all you do. :>) Read more

After talking with the rep from appliance pro, she helped me verify wat I needed, everything came as we discussed. After removing the inner door the vent assembly was difficult removing, it does unplug, do not twist it off, had to replace that piece as well. Had to cut of notch on inner door for the vent assembly to reseat properly. It does twist off, just a bear to put back on. once all assembled turned the machine on and no more leaks. Saved a bundle from calling the appliance repair guy. Read more

Ordered part from appliancepro and simply remove wheels and replace new rack it was very simple Read more