Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Blender Parts

Best Seller
Blender Drive Coupler
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9704230

Blender won't blend or makes grinding noise? A worn drive coupler is often the cause. This motor-to-blade connector takes 5-10 minutes to replace.

This part fixes the following symptoms
  • Door won't open or close
  • Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You Blender drive cupler had been chewed up.   Robert B. • San Tan Valley , AZ • March 26, 2014

Replacement took only a few seconds after the old part was removed followinf the instructions in the video. Part arrived as promised in two days. Read more

More
$13.61
Compare At:
$16.06
You Save:
$2.45

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Jar
Genuine Whirlpool part

Jar

By: Whirlpool
Part Number: WPW10555711

The Jar is an OEM part for Whirlpool blenders. This jar serves as the container where ingredients are placed for blending, mixing, or pureeing. This plastic jar measures approximately 8 inches wide by 10 inches high and has a capacity of 56 liquid ounces. The part includes the jar, blades, and bottom coupling. 

Causes of a bad jar can include cracks or chips from accidental drops, warping from exposure to extreme temperatures, or clouding and scratches from prolonged use. These issues can compromise the jar's structural integrity and affect the overall performance of the blender.

Symptoms of a bad Jar include:

  • Leaks during blending
  • Difficulty in attaching the jar to the base
  • Visible cracks, chips, or warping
  • Reduced blending efficiency due to a compromised seal

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You Blender coupler was stripped   Scott R. • Wilmington , IL • September 30, 2016

Most of the instructions you find online are for a different type of coupler that pops off. This model is different, as the coupler unscrews. I found a video for this specific model blender and I'll summarize below: Turn the blender over so the bottom of the blender is facing up You have to pop the bottom rubber feet off. Take off the four screws on the bottom of the blender Lift the bottom of the blender up and off. This may take two people. You'll need a heavy duty wrench under... Read more

More
$93.78
Compare At:
$112.54
You Save:
$18.76

IN STOCK
Ships Today Guaranteed
Add to Cart
Blender Drive Coupling
Genuine Whirlpool part
By: Whirlpool
Part Number: W10917062

This drive coupling connects the motor shaft to the blender jar. Replace if worn, stripped, or cracked to restore proper blade rotation and function.

Do-It-Yourself Stories from Customers like You Drive coupler and coupling both on blender and blender jar, were chewed up by using hot stuff in blender. Which we should have not done.   Joseph F. • Turnersville , NJ • October 11, 2018

Just ordered blender jar coupler and blender motor coupling and now works fine and like new. Read more

More
$12.56
Compare At:
$14.95
You Save:
$2.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Blender Jar Base Gasket Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10686132

Seals blender jar to base preventing leaks. Replace if cracked, worn, or leaking occurs. Confirm fit with your model number before ordering.

Do-It-Yourself Stories from Customers like You Leaking   Michel T. • Pensacola , FL • August 21, 2018

Change the bottom sealer joint Read more

More
$8.36
Compare At:
$9.95
You Save:
$1.59

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Lid Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: W10854962

This washer lid assembly replaces a cracked, broken, or misaligned lid so the washer can close and lock correctly, restoring safe operation and reducing cycle interruptions caused by a lid that won't align or latch.

  • Covers the tub opening and aligns with the lid lock/strike for proper engagement
  • Restores the safety interlock so wash cycles can start and run without interruption
  • Helps contain splashing and keeps debris out of the washer when not in use
  • Typical symptoms include visible cracks or shattering, warped or loose lid, broken hinge area, or intermittent lid-lock errors
What's included: One washer lid assembly. Installation notes:
  • Disconnect power before servicing
  • Protect the cabinet surface and support the lid during removal/installation to prevent damage
  • If required by your model, transfer existing hinge hardware and fasteners to the new lid
  • After installation, check alignment and ensure the lid lock engages smoothly before running a cycle

Do-It-Yourself Stories from Customers like You Need a new lid!   Stanley K. • Lebanon , OR • August 13, 2020

Replace it. Read more

More
$33.28
Compare At:
$39.60
You Save:
$6.32

IN STOCK
Ships Today Guaranteed
Add to Cart
Pusher (Ice Dispenser)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10466865

This replacement pusher fits the refrigerator's ice dispenser/ice-bucket assembly and helps drive the mechanism that moves ice through the chute. Replacing a worn or broken pusher restores smooth, reliable ice dispensing.

  • Engages the dispenser/crusher linkage to advance ice from the bucket toward the auger and chute
  • Supports crushed/cubed selection on models equipped with that feature
  • Wear or breakage can cause weak or no dispensing, jamming, or being stuck in one mode
  • Visible cracks, deformation, or missing plastic are common failure signs
What's included: 1 pusher Install notes:
  • Disconnect power to the refrigerator; remove the ice bin
  • Access the ice bucket/dispenser mechanism and note the original pusher's orientation before removal
  • Reuse existing screws/clips as needed and confirm the mechanism moves freely after installation
  • Reinstall the bin, restore power, and test both cube and crush dispense modes

More
$35.29
Compare At:
$42.35
You Save:
$7.06

IN STOCK
Ships Today Guaranteed
Add to Cart
Food Processor Feed Tube Pusher
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10461924

Replacement pusher for food processor feed tube. Guides ingredients safely down the chute and engages the cover interlock. Replace if cracked, broken, or missing.

Do-It-Yourself Stories from Customers like You Missing pusher.   Sidney B. • Independence , KS • December 24, 2020

Just installed. Read more

More
$19.95
Compare At:
$23.74
You Save:
$3.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Gasket
Genuine Bosch part
By: Bosch
Part Number: 00047953

Color: off-white. Measures about 2-1/2 inches in diameter.

Do-It-Yourself Stories from Customers like You Needed a new gasket for a very old blender   Brooks L. • Austin , TX • September 12, 2014

Eventually got the gasket i needed from AppliancePartsPros Read more

More
$16.68
Compare At:
$19.85
You Save:
$3.17

IN STOCK
Ships Today Guaranteed
Add to Cart
Blender Motor Shaft Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9709366

Seals the motor shaft opening to prevent liquids from entering the housing. Replace if you notice leaks or moisture around the base. Verify fit with your model.

More
$2.64
Compare At:
$3.12
You Save:
$0.48

IN STOCK
Ships Today Guaranteed
Add to Cart
Food Processor Bearing Support
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10451327

Keeps rotating shafts aligned for smooth, quiet operation in your food processor. Replace when you notice noise, friction, or wobbling during use.

Do-It-Yourself Stories from Customers like You Kitchenaid food processor 1466er power shaft lodged in multipurpose blade making it unusable   Lee B. • Earling , IA • September 18, 2022

I consulted with the company and got zero assistance. I turned to AppliancePartsPros.com and found parts on the diagrams provided. I ordered the parts I thought I needed. They were delivered quickly; I replaced the old parts with the new and I am back in business. Everything works perfectly! I have depended on this site several times with various appliance fixes, and I am always satisfied. The prices are good, the parts are top-notch, and they arrived promptly....what more could you ask... Read more

More
$3.51
Compare At:
$4.14
You Save:
$0.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Food Processor Spatula
Genuine Whirlpool part
By: Whirlpool
Part Number: 8211760

Replace your food processor's spatula accessory. Designed to scrape bowls and blades clean. Order a new spatula if yours is cracked, broken, or missing.

More
$20.66
Compare At:
$21.85
You Save:
$1.19

IN STOCK
Ships Today Guaranteed
Add to Cart
Blender O-Ring Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: W11211427

O-ring seal creates a leak-resistant joint between blender components. Replace when worn to prevent drips and seepage. Confirm fit with your model number.

More
$15.23
Compare At:
$18.28
You Save:
$3.05

IN STOCK
Ships Today Guaranteed
Add to Cart
Ring-O
Genuine Whirlpool part
By: Whirlpool
Part Number: W11700631

 

More
$3.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Blender Drive Coupler
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10279256

Connects the blender motor to the blade assembly. Replace if stripped, cracked, or worn from overloading or blending hard ingredients without liquid.

This part fixes the following symptoms
  • Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You Blender coupler was stripped   Scott R. • Wilmington , IL • September 30, 2016

Most of the instructions you find online are for a different type of coupler that pops off. This model is different, as the coupler unscrews. I found a video for this specific model blender and I'll summarize below: Turn the blender over so the bottom of the blender is facing up You have to pop the bottom rubber feet off. Take off the four screws on the bottom of the blender Lift the bottom of the blender up and off. This may take two people. You'll need a heavy duty wrench under... Read more

More
$10.46
Compare At:
$12.45
You Save:
$1.99

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Best Seller
Food Processor Feed Tube Pusher
Genuine Whirlpool part
By: Whirlpool
Part Number: W11027645

Replacement pusher for food processor feed tube. Safely guides ingredients through the chute during operation. Replace if cracked, broken, or missing.

Do-It-Yourself Stories from Customers like You The emergency shut off metal piece broke away from the flimsy plastic hole in which it was set.   Susan K. • Alpharetta , GA • September 21, 2021

Had to buy a new pusher. Read more

More
$44.25
Compare At:
$52.66
You Save:
$8.41

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Blender Jar Base Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9704204

Seals the blender jar base to prevent leaks during blending. Replace if you notice liquid leaking from the bottom. Confirm fit with your model number.

Do-It-Yourself Stories from Customers like You Rubber piece in kitchenaid blender was melting   Franklin D. • Doraville , GA • May 23, 2016

Ordered part and followed video help on how to install. It went smooth. I am not repair oriented butit was easy. Read more

More
$17.95
Compare At:
$21.54
You Save:
$3.59

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Blender replacement parts are essential for keeping your kitchen hero in top shape. Whether you're mixing up a smoothie or puréeing a delicious soup, a well-functioning blender is key. The blades, jars, gaskets, seals, and even motor bases are some of the essential blender parts that ensure your appliance runs smoothly. These parts work together to deliver the high performance you expect, whether you have a quick breakfast on the go or culinary adventures at home.

The blender is a versatile appliance in many households, making meal prep quicker and more enjoyable. High-quality blender replacement parts help maintain or restore this versatility. Investing in OEM replacement parts guarantees compatibility and quality, ensuring your blender performs as it should without unexpected hiccups. These genuine parts are designed specifically for your model, providing peace of mind and extending the life of your appliance.

Finding reliable blender replacement parts is simpler than you might think. With a variety of options available, you can be confident that your blender will be ready to help you whip up your next culinary creation. Keep your kitchen running smoothly with parts that meet the highest standards of quality and functionality.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store