Chainsaw Starter

Starter rope won't rewind? This chainsaw starter pulley kit restores the recoil system. Includes pulley and spring components for reliable pull-starts.

If your chainsaw rope won't retract after pulling, the starter spring likely needs replacement. This spring creates the recoil to start the engine.

This replacement starter spring is a genuine OEM model from Husqvarna. The starter spring, also sometimes called the recoil spring or recoil starter spring, is part of the entire starter assembly. It attaches to the fan and flywheel housing and is responsible for helping to retract the starter rope when it is pulled to engage the engine. Over time, the spring can wear out or become twisted. This can cause the starter rope to no longer retract or it can even seize up the entire starter assembly. Replacement of the spring is the only option and this OEM part can provide an exact fit for select engines. This part is designed for use with blowers, edgers, trimmers, and pruners that feature Husqvarna engines and that are manufactured by brands like Weed Eater, Poulan, and Husqvarna themselves. The starter spring is made of durable metal and is sold individually. Always disengage the spark plug and allow the engine to cool completely before beginning and repair projects, and protect the hands by wearing gloves.

Can't start your leaf blower or trimmer? A broken starter handle prevents the pull cord from engaging the engine. This replacement handle restores easy starting in minutes.

Fix a broken or missing pull start handle that prevents engine starting. This chainsaw starter handle works with the recoil assembly for reliable starts.

Fix a chainsaw that won't pull-start or has a broken recoil cord. This starter pulley connects the recoil mechanism to engage the engine during starting.

Replace a worn starter hub if your chainsaw won't start or the pull cord spins freely without engaging the engine. Simple repair in 15-20 minutes.

If your trimmer won't start when pulling the cord, the starter pawl may be worn or broken. This small part engages the engine during pulls.

This is a rope guide that is used with various types of lawn and garden equipment. It connects the rope handle and the starter rope. It helps prevent damage to either of the ropes by covering them in durable plastic material. Over time or through use, the rope guide can become damaged or break. If this happens, the part will need to be replaced. First, put the equipment on a flat surface. Drain the fuel from the tool and disconnect the spark plug wire. Next, the starter will need to be removed from the tool to gain access to the rope guide. The rope guide and any other damaged components, such as the string and springs, can be removed from the tool before adding a replacement component. This is an authentic OEM replacement component that is sourced directly from the manufacturer. It is sold as an individual part. The rope guide is compatible with string trimmers, leaf blowers, hedge trimmers, and pole pruners manufactured by Little Wonder, Echo, and Shindaiwa.

This starter spring is a genuine OEM replacement part for chainsaws that operate using a starter rope. When an operator pulls the starter rope out, there is a pulley around which the rope then has to recoil. The starter spring maintains tension in the pulley so that the rope will naturally recoil. The starter spring also provides enough tension to prevent the operator from yanking the rope all the way out of the assembly. Through repeated use, and especially if an operator is rough on their appliance, the starter spring can loosen up and will no longer work as effectively. When this happens, the starter pulley will not recoil and the starter rope will hang loose from the appliance. Fortunately, switching out the starter spring is an easy repair that should only require a wrench and a pair of pliers. Be careful when pulling the old spring out. Although it isn't as tense as it once was, it still has the potential to snap back. This replacement starter spring is a high-quality part for Husqvarna, Poulan, and Weed Eater appliances, and as such, it is sourced from its original manufacturer. This part does not ship with any additional hardware.

Line trimmer won't start or pulls hard? This starter pulley kit restores easy starting. Moderately easy DIY repair for gas-powered trimmers.

Trimmer won't start or rope won't retract? This recoil starter assembly includes pulley, rope, and handle for reliable pull-start operation.

This is an OEM replacement starter pulley kit designed for use with gas chainsaws. The starter pulley assembly replaces the components of your recoil starter that may fail due to normal wear and tear. The pulley and return spring react to the pull of the starter rope and then engage the flywheel. This is what fires the chainsaw engine. If the starter rope is not reacting or the flywheel is not engaging, there may be an issue with the starter pulley assembly. This repair can be completed with a screwdriver and pliers and doesn’t take a lot of time. This starter pulley kit is a genuine product from Husqvarna, and it is designed for use with Poulan, Jonsered, and Husqvarna engines and outdoor power equipment. This kit includes the plastic pulley, return spring, hub, and two screws for securing the unit. The housing, rope, and starter grip will be sold separately if replacements are needed.

Trimmer won't start or rope won't retract? This starter cup assembly rotates the flywheel to power your engine. Direct-fit part for many trimmers.

A starter housing assembly is a plastic unit that attaches to the top of the engine to protect the starter. It is also where the starter rope is attached and it covers the flywheel that is responsible for engaging the motor. Debris can hit the cover and cause damage, or it could simply become damaged or worn over time. If this happens, you will want to replace it as soon as possible in order to ensure the safe operation of your equipment. This OEM unit includes the top cover, flange, and hardware necessary for installation. When replacing the starter housing or any other internal parts, disconnect the spark plug for safety. Be sure to wear gloves, as well, and follow all instructions for proper installation. This starter housing assembly is a genuine MTD product that can be used with various walk-behind lawnmower engines. It is compatible with select models from MTD, Troy-Bilt, Cub Cadet, Craftsman, Yardman, Yard Machines, Remington, Bolens, LawnChief, Huskee, and Ryobi. Part sold individually.