Chipper Shredder Bearing Parts
Genuine Mtd part
By: Mtd
Part Number: 941-0225
Hex flange bearing supports rotating shafts in riding mowers and tractors. Replace when you notice grinding noise or rough rotation. Verify fit with your model.
More
$8.95
- Compare At:
-
$10.65
- You Save:
-
$1.70
Genuine Mtd part
By: Mtd
Part Number: 718-04261
Bearing cup works with cone to provide stability and support radial/axial loads in your lawn tractor. Replace if worn or damaged. Verify fit with model number.
More
$19.71
- Compare At:
-
$23.45
- You Save:
-
$3.74
Genuine Mtd part
By: Mtd
Part Number: 741-0487C
Flange bearing restricts movement and prevents shifting in lawn tractor components. Replace if you notice wobbling or unusual noise. Verify fit with your model.
More
$8.48
- Compare At:
-
$10.18
- You Save:
-
$1.70
Genuine Mtd part
By: Mtd
Part Number: 748-0381
$13.10
- Compare At:
-
$15.28
- You Save:
-
$2.18
Genuine Mtd part
By: Mtd
Part Number: 941-0336
Flange bearing for lawn tractors and walk-behind mowers. Replace when you notice excessive noise, wobbling, or difficulty with blade rotation. Verify fit with your model number before ordering.
More
$12.60
- Compare At:
-
$14.99
- You Save:
-
$2.39
Genuine Mtd part
By: Mtd
Part Number: 941-0337
Flange bearing for lawn tractors and walk-behind mowers. Replace if you notice excessive noise, vibration, or wheel wobble. Verify fit with your model number.
More
$12.95
- Compare At:
-
$15.54
- You Save:
-
$2.59
Genuine Mtd part
By: Mtd
Part Number: 941-04298
Mandrel bearing for riding mowers and lawn tractors. Replace if spindle makes noise or blade wobbles. Ensures smooth blade rotation. Verify fit by model.
More
$19.41
- Compare At:
-
$23.29
- You Save:
-
$3.88
Genuine Mtd part
By: Mtd
Part Number: 941-0475
This is a bushing made from black plastic with a cleft down the middle to provide enough flex for easy insertion. It has a flanged design, which means it won’t easily pop out after installation, even under stress from constant vibration. The bushing’s primary purpose is to protect wires and cables from damage as they pass through a channel. As such, the material is fairly durable and does not need to be replaced under ordinary circumstances.
That said, there are some situations in which it can become damaged. For one thing, it’s easy to damage while repairing the wires or cables that run through the bushing. If the bushing does need to be replaced, it requires disconnecting any cables or wires that run through the bushing. Pop out the old bushing with a rubber mallet, install the new bushing the same way, reconnect the wires, and the repair is complete.
This is an OEM part sourced directly from MTD, and it is sold individually. It was initially used on snowblowers but has also been used on lawnmowers and lawn tractors.
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Mtd part
By: Mtd
Part Number: 941-0563
A ball bearing is a rolling element bearing that uses balls to maintain the separation between the bearing races. This part is designed for use with outdoor lawn and garden power equipment such as snowblowers, chippers, shredders, and tillers. It is compatible with products by brands such as Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.The ball bearing part is crucial because its purpose is to reduce rotational friction while supporting radial and axial loads. Without functioning ball bearings, valuable outdoor equipment would fall apart and quickly stop working. That is why it is important to get any ball bearings replaced if they are worn out or malfunctioning.This ball bearing is made out of metal. The ball bearing is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually.
More
$38.95
- Compare At:
-
$46.35
- You Save:
-
$7.40
Genuine Mtd part
By: Mtd
Part Number: 941-0600
Sealed ball bearing reduces friction between fixed parts and rotating shafts. Replace if you hear grinding noise or notice wheel wobble. Verify fit.
More
$27.62
- Compare At:
-
$31.14
- You Save:
-
$3.52
Genuine Mtd part
By: Mtd
Part Number: 941-0706
This is an authentic OEM replacement flange bearing sourced directly from the manufacturer that is a component in many different lawn and garden machines. The flange bearing is used to tightly fit between two connected components. This connection creates an airtight seal. Over time and with normal wear and tear, the flange can become worn and lose the seal. When this happens, the flange will need to be replaced. The flange helps to distribute the weight load in some instances and if it is damaged, the weight would be displaced and could lead to serious energy.Replacement depends on the location of the flange that needs to be replaced. Place the equipment on a flat surface and disconnect the spark plug wire. Take the machine's components off as needed to access the flange and remove it using a pair of pliers. Clean off the components where the bearing was located before installing the new flange bearing. Reassemble the machine using a reverse process.This flange is a heavy-duty part that is sold as an individual item. The flange bearing can be used with lawnmowers and other lawn and garden machines manufactured by Craftsman.
More
$9.12
- Compare At:
-
$10.03
- You Save:
-
$0.91
Genuine Mtd part
By: Mtd
Part Number: 948-0227A
Hex flange bearing provides support for lawn tractor spindle assemblies. Replace if worn, loose, or causing wobble. Confirm fit with your model number.
More
$9.95
- Compare At:
-
$11.84
- You Save:
-
$1.89
Genuine Mtd part
By: Mtd
Part Number: 941-04299
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Mtd part
By: Mtd
Part Number: 741-0356A
$8.71
- Compare At:
-
$9.58
- You Save:
-
$0.87
Genuine Mtd part
By: Mtd
Part Number: 741-04108
$8.95
- Compare At:
-
$10.65
- You Save:
-
$1.70
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 741-05060
The bearing sleeve is an authentic part designed for use with lawn tractors of the riding variety. This bearing sleeve is located on the transmission shaft and used to assist in securing the bearing in its place. The location of this part means that it is susceptible to constant vibrations and other threats. This part can wear down over time and eventually require a replacement, or need to be replaced as a result of damage or a direct impact. Using a genuine product like this replacement bearing sleeve will provide an exact fit for compatible models. This genuine OEM bearing sleeve is manufactured to specific standards by MTD. It is compatible with tractors from MTD, RYOBI, Bolens, Yard Machines, Cub Cadet, HUSKEE, Yard Man, and Troy-Bilt. There are hundreds of tractors that can use this specific bearing sleeve. It is made of durable metal and sold as an individual unit. A wrench will be required for this part replacement, but it is an easy task that should not take a lot of time. Always disengage the engine before starting any repairs and ensure that it is not hot to avoid burns or causing potential damage.
More
$10.55
- Compare At:
-
$12.66
- You Save:
-
$2.11
Out Of Stock
Usually ships within 4 - 14 days