Karen E Dayton , TX November 14, 2014 Appliance: Kenmore Washer 41748102701 Error code e43; washer would not spin Replaced the main control board. Read More... 5 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers
Everett B Cedar Rapids , IA May 24, 2014 Front load washer door wouldn't lock Put new lock on -didn't work. ordered control board from appliancepartspros and had it the next day.put it in and started to wash clothes. thank you again to the lady that helped me. Read More... 3 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Noreen C Spanaway , WA February 05, 2017 Control panel continuously beeping and doesn't work to run machine Slid top of washing machine off, removed front panel, removed all cables, replaced with new control panel, then put everything back together. Worked perfectly! Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Robin D Lawrence , KS October 31, 2014 Appliance: Model 4174802701 Washer electronics were erratic Googled main board problem on model ######### and utube had a vidio which had my kenmore front load washer as the feature what luck!! the example was doing the same thing mine was I ordered the main board on Friday PM got it delivered to my door Tuesday AM installed the part with my 3 year old granddaugter helping me in about 45 min. could have done it in half the time if they would have mentioned to remove the "cycle indicator stem from the old board and put it on the new board avoiding the assembly being done twice. I'm so glad the repairman could'nt get out till monday afternoon giving me time to research the repair and do it myself saving me $$$$$ I have used this site several times and am just "blown away" by the service and delivery which says usually 1.7 days their record for me is ordered on wednesday PM arived the next day at 10 AM (about 20 hours) KUDOS Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Pliers, Screwdrivers
Gilberto G Stillwater , OK March 03, 2020 Appliance: Kenmore Washer 41748102701 Control panel was acting up. Replaced control panel. Watched the video and it was easy after that. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
James R Lakewood , CO January 28, 2019 Appliance: Model 417.48102700 Control panel was out Had a repair tech verification that the control panel was out. Saw appliance parts pros had helped a few people out with the same problem. Ordered the part and replaced in about 20 mins. Super easy! Thanks for the info saved me about 250 bucks! Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Michael E Bloomington , IL September 10, 2018 Washer wasn't working at all. Control board needed to be replaced. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Dennis J Big Sky , MT February 23, 2017 Beeping wouldn't lock door or initiate cycle couldn't put in diagnostic mide Tried step wise approach. Replaced door lock switch & plastic catch on the door. Worked once and thought all was good to go. Next day beeping returned. Removed dryer and replaced control board. Got to be careful when snapping it back together or may snap off some of the fasteners. Don't lose the springs for the buttons. It's easy to do. Got it out back together and working well now. Don't need any special tools but must have patience. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Screwdrivers
Dennis N Sayre , PA October 23, 2015 Appliance: Model 481.1 Not all cycles worked on washer Replaced control board and front panel Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Jeff S Friday Harbor , WA September 04, 2015 Appliance: Model KENMORE Father in law prys front load washer door open before end of cycle (door lock failure) Ordered new door lock unit, installed it. but still needed a new control board, worse case scenario is they both go out, ordered the board 122.00, ouch expensive but what are you going to do, I received the part held my breath , put it in and wa-la it works, Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers