Removal and replacement took less than 10 minutes in total. The biggest challenge was to change the left door gasket because of the retractable piece (not sure what it's called) that seals the gap between the two doors, which I accomplished by installing the side of the gasket that is furthest away from the hinge. I squeezed it in by starting the top corner of the gasket at the bottom and then sliding it up little by little until the top was lined up properly and could be pressed in. Once it is properly lined up, anything that still needs to be pressed down can be handled with something flat, like a butter knife. Be sure to not cut the gasket. The rest of the gasket is press to fit and goes quick. If you find that you have installed it incorrectly, take care when pulling off your gasket, or you might tear one of the corners.