Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Electrolux Dryer Fuse Or Sensor

Best Seller
Electrolux Dryer High-Limit Thermostat
Genuine Frigidaire part
By: Frigidaire
Part Number: 3204267

Dryer won't heat or shows E64 error? High-limit thermostat cuts power if overheating occurs. Moderate DIY fix with our video guide and instructions.

This part fixes the following symptoms
  • Shuts off too soon
  • Too hot
  • Takes too long to dry
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You The dryer did not heat!   Linda R. • La Jolla , CA • November 30, 2014

My appliance repair guy checked out the problem, but the stack washer dryer required the contractor to dismantle the cabinet to allow the repair to occur. So i wanted the parts available for the repair, so we would not have to have the dryer pulled apart in a small space for an extended time i ordered the parts on Friday afternoon and they arrived at my home before noon on Saturday! The contractor and the repairman were able to coordinate the repair on Tuesday morning, and though the... Read more

More
$48.95
Compare At:
$62.47
You Save:
$13.52

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electrolux Dryer Thermal Limiter
Genuine Frigidaire part
By: Frigidaire
Part Number: 134120900

Dryer won't start or shuts off unexpectedly? A failed thermal limiter is often the cause. This safety fuse prevents overheating. DIY repair in 30-45 minutes.

This part fixes the following symptoms
  • Shuts off too soon
  • Too hot
  • Takes too long to dry
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Worn bearing and felt causing dryer drum to rattle and creek   Bay S. • Bothell , WA • January 05, 2016

Recommendations have fun and a bucket to prevent losing parts. First watch the videos, practice disassemble and reassemble the dryer drum. Make certain you have a good screw driver and spatula from kitchen (could not find my putty knife). Secondly, clean and inspect everything, make sure the motor bearing and belt pulleys are in good condition with little or no play. Third after you have confidently disassembled, vacuum cleaned, inspected all the worn parts, grease the motor and pulley,... Read more

More
$12.56
Compare At:
$14.95
You Save:
$2.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electrolux Dryer Thermal Fuse
Genuine Frigidaire part
By: Frigidaire
Part Number: 137032600

Dryer won't heat or start? This thermal fuse cuts power when temperatures get too high. Common fix for no-heat issues. Easy 30-minute DIY repair.

Do-It-Yourself Stories from Customers like You Electrolux dryer e64 error code   Katherine S. • Apex , NC • January 05, 2015

I think I have a lemon of a dryer. I keep having to pay someone to replace my heating element about every year. So I already had the heating element, but I thought I would replace the thermostat and the limiter also. Yes, I am a 46 year old mom, and I replaced all three items. Thank goodness to youtube! Ha! I have ordered from you before and you always send promptly. Thanks! Read more

More
$18.95
Compare At:
$22.59
You Save:
$3.64

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electrolux Dryer Control Thermistor
Genuine Frigidaire part
By: Frigidaire
Part Number: 134587700

Dryer not heating or overheating? A faulty control thermistor may send incorrect temperature data to the control board. 30-min repair with video.

Do-It-Yourself Stories from Customers like You Constant beeping dryer kept restarting   Jimmy L. • Del City , OK • February 15, 2015

Replaced control board. Did not need Control Thermistor in my case, but I'm keeping it as backup. Got the Drum Belt just in case it breaks on me since the dryer is aging. To replace control board: Disconnect power and pull dryer away from wall. Take 2 black screws on the back off to remove the top lid. Remove 2 screws on top that hold the control interface on. Remove 2 screws on the bottom backside of the control. Pull out control panel and pull off terminal connections and push to remove... Read more

More
$55.95
Compare At:
$66.58
You Save:
$10.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electrolux Dryer Thermal Fuse
Genuine Frigidaire part
By: Frigidaire
Part Number: 134711401

Dryer won't start or shuts off mid-cycle? This thermal fuse cuts power when overheating occurs. Common fix for E63, E66 errors. DIY repair under 1 hour.

Do-It-Yourself Stories from Customers like You E63 error code and dryer overheating   William S. • Ladson , SC • May 03, 2014

Replaced exhaust thermal cutoff switch. Sears wanted to charge for a service visit + parts and labor. $17 part, $6 shipping and I received the part the following day. Repair complete in less than an hour at a fraction of the cost. Thanks appliance pros. Read more

More
$36.95
Compare At:
$43.97
You Save:
$7.02

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electrolux Dryer Flame Sensor
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303281135

Dryer not heating or flame goes out after igniting? This flame sensor monitors burner temperature to regulate gas flow. Easy 15-minute DIY repair.

This part fixes the following symptoms
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You Our dryer didn't heat   Larry L. • Poway , CA • November 10, 2014

Being a complete DIY I hate to call some unknown person into my home knowing that just to get them there will cost me more than I will spend for parts that I don't need.After all, they are trying to make a living and by selling me parts that I don't need will increase their profits. I've dealt with APP before and was impressed by their site because I could find both mechanical and electrical drawings for almost everything I have. I looked up my dryer, decided what was probably the problem,... Read more

More
$41.30
Compare At:
$55.90
You Save:
$14.60

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electrolux Dryer Thermal Limiter
Genuine Frigidaire part
By: Frigidaire
Part Number: 137539200

Dryer won't heat or shows E66 error? The thermal limiter prevents overheating by monitoring airflow. Moderate DIY repair, requires rear panel access.

Do-It-Yourself Stories from Customers like You Frigidaire dryer error e66 then door open   Nolan R. • Hoboken , NJ • February 06, 2017

My Electrolux Frigidaire Gas Dryer stopped working and I got an error code E66 that the thermal limiter blew from over heating. The E66 code stops displaying after the initial code and you will then get a door open message. I replaced the thermal limiter and the thermostat just to be sure which part at the problem. The job is hard because you have to take apart the entire dryer and remove the drum. Would be a tough project to complete on your own. Read more

More
$25.95
Compare At:
$30.88
You Save:
$4.93

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electrolux Sensor-Moisture
Genuine Frigidaire part
By: Frigidaire
Part Number: 134786100

The Moisture Sensor is an OEM part for Frigidaire dryers. This essential component detects the moisture level in the dryer drum during a drying cycle. It plays a crucial role in determining the optimal drying time, preventing over-drying or under-drying of clothes.

A faulty moisture sensor can be caused by various factors. Over time, the sensor may become coated with lint or residue, affecting its accuracy. Additionally, electrical malfunctions or physical damage can lead to sensor failure.

Symptoms of a bad moisture sensor may include:

  • Clothes that are still damp or excessively dry after a drying cycle.
  • The dryer stops prematurely or runs for an extended period.
  • Error codes related to moisture detection.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Do-It-Yourself Stories from Customers like You The sensor-moisture clip was broken off and needed to be replaced.   Edgar D. • Bradford , AR • April 06, 2014

Simple unscrewed the set screw, removed the broken sensor-moisture part, attached the leads, and reattached the part to the back of the dryer. Took about 4 minutes. Read more

More
$70.34
Compare At:
$83.70
You Save:
$13.36

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electrolux Thermostat
Genuine Frigidaire part
By: Frigidaire
Part Number: 137116700

The Thermostat is an OEM replacement part for Frigidaire dryers. It plays a crucial role in monitoring and regulating the temperature inside the tumbler. The thermostat works closely with the heating element and controls to accurately sense temperature fluctuations and modulate heating levels accordingly.

Symptoms of a bad thermostat include:

  • Clothes taking an overly long time to dry
  • The dryer is heating excessively and tripping the breaker
  • Temperature display or heater lights not functioning
  • Clothes drying unevenly, still damp in spots

Causes can be normal wear over extreme heating and cooling cycles. Environmental contaminants may also impact sensor performance.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You Frigidaire dryer error e66 then door open   Nolan R. • Hoboken , NJ • February 06, 2017

My Electrolux Frigidaire Gas Dryer stopped working and I got an error code E66 that the thermal limiter blew from over heating. The E66 code stops displaying after the initial code and you will then get a door open message. I replaced the thermal limiter and the thermostat just to be sure which part at the problem. The job is hard because you have to take apart the entire dryer and remove the drum. Would be a tough project to complete on your own. Read more

More
$48.37
Compare At:
$57.56
You Save:
$9.19

IN STOCK
Ships Today Guaranteed
Add to Cart
Electrolux Dryer Thermistor Temperature Sensor
Genuine Frigidaire part
By: Frigidaire
Part Number: 134711200

Fix a dryer that won't shut off automatically or has temperature control issues. This thermistor sensor monitors heat levels for proper cycle operation.

Do-It-Yourself Stories from Customers like You It was taking to long to dry   Peter H. • Williston , ND • October 22, 2017

I replaced the thermostat. The bearing on the motor was getting loose, so I changed the motor to. The repair took about 2 hours. There are some good re[air videos on the parts web site. Read more

More
$51.46
Compare At:
$61.24
You Save:
$9.78

IN STOCK
Ships Today Guaranteed
Add to Cart
Electrolux Dryer Thermistor Temperature Sensor
Genuine Frigidaire part
By: Frigidaire
Part Number: 134711300

Fix dryer heating issues with this thermistor temperature sensor. Solves intermittent heat, cycle errors, and poor drying. Easy DIY repair.

Do-It-Yourself Stories from Customers like You No heat burner running 30 seconds at a time then turning off   John G. • Oxford , MI • September 02, 2019

Replaced all sensors, limiters, thermistors, thermostat. Works great now. Read more

More
$53.95
Compare At:
$64.20
You Save:
$10.25

IN STOCK
Ships Today Guaranteed
Add to Cart
Electrolux Moisture Sensor (Dryer)
Genuine Frigidaire part
By: Frigidaire
Part Number: 134786110

This moisture sensor monitors dampness inside the dryer drum and signals the control when fabrics are dry, helping automatic cycles end on time and avoid overdrying. Replacing a failed sensor can restore consistent Auto Dry performance and cycle times. What it does:

  • Detects moisture level via conductivity across the sensor surfaces inside the drum
  • Sends feedback to the control so Auto Dry cycles advance and stop correctly
  • Helps prevent overdrying and underdrying in sensor-based cycles
  • Common symptoms of a faulty sensor may include: auto cycles ending too soon or running too long, clothes remaining damp, or the dryer staying on "Sensing" while timed cycles still work
What's included:
  • 1 moisture sensor
Install notes:
  • Disconnect power and, if applicable, shut off gas before servicing
  • Access the sensor at the front bulkhead/lint housing area; remove front panel as needed per model
  • Transfer connectors and route wiring exactly as original; secure the sensor firmly
  • Clean the sensor contact surfaces with rubbing alcohol; residue from dryer sheets or fabric softeners can affect readings

Do-It-Yourself Stories from Customers like You Clothes got stuck on moisture sensor bar and broke it off   Felix M. • Kyle , TX • April 17, 2015

Fixed it in 5minutes. One end has a Phillips head screw and the other has a tab with to metal leads for wires. The end with the tab broke. I removed the screw for the other end abd the sensor bar came off. To put the new piece on, I connected the wires to the leads, slid the tab end into place on the drum and screwed in the other end. Done! Easy! Read more

More
$74.42
Compare At:
$88.56
You Save:
$14.14

IN STOCK
Ships Today Guaranteed
Add to Cart
Electrolux Dryer Control Thermostat
Genuine Frigidaire part
By: Frigidaire
Part Number: 134048800

Dryer overheating or taking too long to dry? This control thermostat regulates internal temperature by cycling the heater on and off. Easy replacement.

Do-It-Yourself Stories from Customers like You My dryer was taking too long to dry my clothes.   Gerard C. • Millville , MA • March 08, 2017

I replaced both thermostats, the seals and the heating element and the belt. It's an easy job to keep my dryer last longer. Read more

More
$76.95
Compare At:
$91.57
You Save:
$14.62

IN STOCK
Ships Today Guaranteed
Add to Cart
Electrolux Dryer Thermal Limiter
Genuine Frigidaire part
By: Frigidaire
Part Number: 137515200

If your dryer won't heat or shuts off early, the thermal limiter may have failed. This safety device cuts power when temperatures exceed safe limits.

More
$51.46
Compare At:
$61.24
You Save:
$9.78

IN STOCK
Ships Today Guaranteed
Add to Cart
Electrolux Dryer Safety Thermostat
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308015399

Dryer not heating or shutting off early? The safety thermostat monitors temperature and cuts power when it gets too hot. Tests quickly with a multimeter.

More
$153.95
Compare At:
$183.20
You Save:
$29.25

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

When you're on the hunt for Electrolux dryer fuse or sensor replacement parts, it's crucial to know just how important these components are for the optimal performance of your dryer. Fuses and sensors are like the silent heroes behind the scenes, ensuring your Electrolux dryer operates smoothly and efficiently.

Maintaining the functionality of your Electrolux dryer is essential for keeping your laundry routine running without a hitch. Parts such as the dryer fuse and sensor play pivotal roles in regulating and monitoring the appliance's operation. These Electrolux dryer parts are designed to protect the dryer from overheating and to ensure that it cycles correctly, which is integral to achieving perfect dry times.

Opting for OEM replacement parts guarantees that you're getting high-quality and compatible components. OEM Electrolux dryer fuses and sensors ensure that your appliance continues to perform at its best, minimizing any downtime and extending its lifespan. Trusting these original parts can make all the difference in maintaining the integrity of your dryer.

You can rest easy knowing that there are top-quality Electrolux dryer fuse or sensor options readily available. With these dependable parts, your dryer will be back to top performance in no time, making your laundry days just a bit easier.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store