John M San Jose , CA March 26, 2019 Appliance: Frigidaire Refrigerator FRT18B5AW1 Frig compartment not cold, freezer seemed ok FIrst, I removed the cardboard cover on the back, exposing the compressor compartment. I noticed the fan was not moving. I touched the blade and it immediately started spinning, but not very fast. The compressor was getting hot, and I think prob. overheating. The fan stopped after a few hours and then "froze" solid the next day. I got the parts and I followed the process in the video to replace the fan. VIdeo was right on the money. but there were some difficulties. The retention clip on the wire connector was brittle and it broke off. The kit had an adapter plug, but without the retention clip it was not secure, I simply put a tie-wrap around it and held it tightly. I noticed there was some ice in the freezer so I assumed the defrost timer was bad and I got one of those too. I first noticed that there was no cold air blowing from the top-back of the frig compartment. That was a big tip-off that the coils were iced up. I took off the light housing in the frig compartment and quickly saw that the back vent opening to the freezer compartment was 100% iced-up and blocked (no cold air getting to the frig).. I took the four screws off the back panel of the freezer, but it was frozen solid at the bottom where it sticks through to the frig compartment. Not wanting to break the plastic back panel part, I wisely used a fan to defrost the the frig, and after a couple hours the back panel came right off. The cooling coils were like a solid block of ice. It took a few more hours with the fan to defrost it. I put in the new defrost timer (easy) following the video. The new fan assembly is plastic and looks different, but fit exactly. It was a bit difficult getting it in because the cooling tubing was in the way, but after a bit of a struggle, I got it in. The hint in the video to put in the back screw first was a lot of help. Strangely, when I turned the frig back on after the 6 hours of defrosting, nothing happened. The light came on in the frig but no compressor noise and no cooling. I unplugged it and I left it overnight, and then plugged it in in the morning and everything started right up and it is working perfectly now, both frig and freezer. I recommend replacing both the fan and the defrost timer, even if you are not sure. Read More... 82 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers, Socket Set
Thomas M Lansdale , PA October 17, 2015 Fridge was running really loud Replacing condenser motor greatly reduced noise Read More... 12 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers
Scott K Aiea , HI October 10, 2019 Appliance: Frigidaire Refrigerator FRT8S6ESBF Loud vibrating sound I initially did a YouTube search that brought me to the AppliancePartsPros.com website. I did some troubleshooting using the videos on the website and was able to determine that the sound was not from the upper freezer fan. I opened the back panel of the compressor area and found one blade of the fan on the bottom of the frig pan. I quickly placed an order for the Condenser Fan Motor Kit and within a week I had the parts and had the refrigerator repaired. I saved my Mother some labor costs and her sanity. Thanks for the help APP! Read More... 7 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Socket Set
Gary M Pittsburgh , PA September 01, 2014 Condenser fan not working in refrigerator Ordered new condenser fan kit and installed it myself Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Pliers, Screwdrivers, Socket Set, Wrench Set
Dallas E North Bend , NE March 13, 2014 Smelled hot and was not cooling very good. Bought condenser fan kit took about 30 minutes to install works great. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers, Socket Set