Hedge Trimmer Carburetor

Primer bulb assembly kit for chainsaws. Installs on the carburetor to circulate fuel for easier starting. Replace if bulb is cracked, hardened, or worn.

The carburetor kit has a metal body that is designed to withstand high temperatures, a rubber primer bulb, and a plastic throttle lever. The carburetor is an integral part of engines in lawn and garden equipment. This is where the air and fuel will be mixed before being sent into the engine. The air comes in through the intake tube, and it flows into a smaller tube, where the fuel is injected through small holes in the carburetor body. Then, the two are mixed and released into the engine through a butterfly valve, which controls the amount of fuel going to the engine for optimal performance. The carburetor can become clogged over time or even be broken or damaged. If the engine is not running properly, the carburetor may need to be replaced. This is a simple replacement that only requires a screwdriver. Make sure to always disconnect the spark plug and wear gloves when performing engine repairs. This kit can be used with several models of lawn and garden equipment, including brands like Weed Eater, Paramount, Poulan, Jonsered, and Husqvarna.

This replacement carburetor kit is a genuine OEM parts kit for Craftsman hedge trimmers. The carburetor takes gasoline from the fuel line and mixes it with air from the intake valve to make a balanced fuel that is ready for combustion. Depending on how much fuel or air pass into the carburetor, the engine may run faster or slower. The most common reason for a carburetor to break down is if it is clogged with engine gunk. While it is sometimes possible to clean out a carburetor, if left for too long, the damage can be irreparable and the part will need replacing. First, remove the air filter and filter housing using a socket wrench. This will give access to the damaged carburetor and make it easier to unhook from the links that hold it in place. Be sure to set the gaskets firmly in place and then reassemble with the new part. This replacement carburetor is designed for use only with Craftsman appliances. It comes sourced directly from the original manufacturer and includes a carburetor and two gaskets.

The replacement primer pump seen here can be used with a range of different types of lawn and garden equipment. The pump is also known as a primer bulb or a primer button. The pump is a rubber bulb that is used to create a vacuum to bring fuel from the tank, through the lines, and into the carburetor to prime the engine. When the engine is primed, there will be enough fuel in the carb to help ensure a fast start. The primer pump can wear out over time and become cracked or develope holes in it. This would nullify its effectiveness as a vacuum to draw in fuel. If there is an issue with the pump, it should be repaired right away. Replacing the pump is simple and requires only a couple of tools. This authentic OEM replacement primer pump can be used with hedge trimmers, string trimmers, and leaf blowers. It is compatible with several models from Husqvarna and Jonsered. Buyers should consult their manual and model diagrams to ensure they are choosing the correct part for their make and model.

Carburetor repair kit for trimmers and brush cutters. Restores proper fuel-air mixing when original carburetor components are worn or damaged. 150 chars

Carburetor repair kit for gas line trimmers and outdoor power equipment. Includes all parts to rebuild worn or damaged carburetors. Use when rebuild needed.

The choke shutter is a trimmer part that restricts the amount of air that flows into the engine. The choke shutter rests inside the carburetor, and is designed to help with the mixture of air and fuel that causes the combustion that starts the engine.If the choke shutter is not opening or closing properly, then the engine will not be able to start. The carburetor's temperature allows the engine to run, and in order to control the temperature, you will need a working choke valve. To install a new choke shutter, start by opening the carburetor inside of the trimmer's engine. This part can be replaced with a screwdriver or bolt extractor depending on what is holding the carburetor together. The choke shutter can then be replaced and tested to make sure it opens and closes properly. This genuine OEM choke shutter is durable and easy to install. It is made from durable metal and is sold individually.

This is a choke control which is used on various types of trimmers for yards and gardens. It is made of durable plastic and is responsible for letting fuel go into the engine whenever the motor is running. The choke control comes with a steel ball, metal valve door, and a spring. If the choke control is damaged or stops working, it will need to be replaced. The engine will not receive fuel if the part is malfunctioning or otherwise damaged.This is a fairly easy replacement project that requires no tools other than a screwdriver. First, make sure the trimmer is turned off to prevent any accidents. Place it on a flat surface while making the replacement. The first step is to remove the carburetor from the engine. At that point, the choke control can be removed and the new replacement part can be installed. Reinstall the carburetor and the equipment will be ready for use.This choke control is a genuine OEM replacement part that is directly sourced from the manufacturer. It comes as an individual part. The choke control is designed to be used in string trimmers and hedge trimmers created by Craftsman, Poulan, and Weed Eater.

This is a Husqvarna carburetor kit intended for use with brush cutters and trimmers. The carburetor is what mixes air and fuel together before it is passed to the engine for ignition. Carburetors may become clogged, damaged or worn. Check for problems with idling, an engine that won't start, or smoke from the equipment. Without a functioning carburetor, the equipment will not work, so a replacement is necessary.If the device is full of fuel and its engine won't start, the carburetor may be faulty. To replace a carburetor, a screwdriver is required. Wear protective gloves. Make sure the machine and engine are cooled before beginning. It is a simple task to replace the carburetor in Husqvarna trimmers and edgers.This Husqvarna carburetor is a genuine OEM part. It is sourced directly from the Husqvarna manufacturer. The carburetor is sold as an individual unit. The replacement part is only compatible with Husqvarna brand trimmers and edgers. It is made of high-quality, durable materials.