Need Help?
Call or text
This is a genuine OEM replacement drive V-belt for a riding lawn mower. The drive V-belt attaches to the drive pulley and transfers rotational motion from the transmission to the mower blade. This causes the blade to then spin and cut grass. By using a belt to transfer motion, the engine does not have to work as hard to spin multiple parts, meaning that it runs more efficiently. Drive V-belts are made of a rubber composite material that will begin to fray and stretch over time. Due to continuous motion, these belts absorb a lot of wear and tear, and if left for too long, they can eventually snap and leave the mower blade non-functional. Therefore, it is wise to check the condition of a V-belt during regular maintenance. As soon as it appears to be wearing away, replace it with a new part using a nut driver and screwdriver. When detaching the lower deck, be sure not to lose the bolt clips, as they are required for reassembly. As a high-quality replacement part, this drive V-belt is directly sourced from its original manufacturer. It is compatible with riding lawn mowers made by Husqvarna, Poulan, Craftsman, and Jonsered. This part ships individually.
Usually ships within 4 - 14 days
A V-belt is responsible for transmitting energy. It is made from a thick and sturdy rubber material. It features grooves for improved traction and measures ½ x 95-1/2. A worn-down v-belt can lead to inefficient energy loss, and therefore poor performance. Installing this v-belt requires pliers and a wrench. First, the spark plug wire needs to be removed. Then, position the mower deck to the lowest possible level. Move the machine's blade engagement level to OFF. Remove the belt found from the engine pulley. Don't forget to take out the bow-tie pins and blade engagement cable as well. Remove the bolt from the pulley cover and loosen the nuts found at the idler pulley. Put the new belt and then tighten the nuts on the idler pulleys. The deck can now be re-assembled to its original position. This Husqvarna 532144959 V-Belt OEM Replacement can help keep a lawnmower in top condition. This genuine Husqvarna made V-belt is specifically for driving the blades on a lawnmower. It is compatible with Ariens, Craftsman, Poulan Pro, Dixon, and Husqvarna mowers. This V-belt is sold individually.
The v-belt is a replacement part used on mowers and lawn tractors. The v-belt works with the pulley assemblies in the machine to transfer power from the engine to the mower blades so that it can properly cut the grass. The v-belt is made from flexible rubber, and over time, the belt can be prone to wear and tear. Owners should check their belts occasionally to ensure they are not wearing out. This could cause the belt to become cracked and brittle, which would require a replacement. If the belt is not working properly, or if it is broken, it will not be possible to transfer power from the engine to the blades. This is a genuine OEM part that is sold individually. This pulley will work for a range of lawn mowers and lawn tractors. The v-belt is compatible with many brands including Craftsman, Husqvarna, Ariens, Dixon, and Poulan. It is important for buyers to make sure they are getting the proper v-belt, including the size, when they are buying their replacement part.
Ground drive belt connects transaxle to engine crankshaft for rear wheel power. Replace when worn, stretched, or broken. Verify fit with your model number.
This replacement part is a V-belt. It is a genuine replacement part made by Husqvarna. This specific belt is typically found near the engine of many types of lawnmowers. V-belts work together with the transmission of the machine.A new V-belt might be needed if the user hears unusual noises coming from inside the machine. This can mean that the belt is stretched out or torn from years of normal use. It is also possible that the belt is damaged in other ways and is unable to perform the movements needed. As this part is close to the engine, be sure the appliance is completely turned off before starting this repair. This belt is a genuine OEM replacement part. Note that it is sourced directly from the manufacturer and is also sold individually.
Hydro pump drive belt transfers power to your riding mower's transmission system. Replace if worn, cracked, or slipping. Verify fit with model number.
Drive belt powers rear wheel propulsion on walk-behind mowers. Replace if slipping, fraying, or mower won't self-propel. Verify fit with your model number.
Lower crank impeller belt for gas snowblowers. Replace if worn, cracked, or slipping to restore snow-throwing power. Verify fit with your model number.
Drives tine rotation on front-tine tillers. Replace if worn, cracked, or slipping to restore proper tilling performance. Confirm fit with your model number.
Ground drive belt for riding mower tractors. Transfers power from engine to wheels for movement. Replace if slipping, cracking, or worn. Verify fit with model.
This V-belt is the primary belt used on many models of lawnmowers. It is used to link the clutch to the pulleys and the deck. The V-belt is a durable item but can become damaged or worn through regular use. If the belt is damaged, it can be cracked, have a burned appearance, or can experience sidewall damage. If any of these things occur, the V-belt should be replaced to prevent additional damage.Replacing a V-belt is simple and takes only a few minutes. A set of wrenches is all a user will need in terms of tools. Before replacing the belt, make sure the lawnmower is on a level surface, turned off, and has had the spark plug wire disconnected. Remove the belt covers from the lawnmower before taking out the V-belt. Replace with a new component and reassemble.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The V-belt is made to be used with lawnmowers manufactured by Poulan, Craftsman, and Husqvarna.
Primary drive belt for 42-inch lawn tractors. Replace if you notice slipping, squealing, or poor engagement. Verify your model compatibility before ordering.
This part is a replacement v-belt. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. It can be used to replace a snapped, worn, or defective v-belt in a variety of different lawnmower models.The v-belt allows the lawnmower to be driven by connecting the drive pulley of the transmission to the motor pulley. This helps to enable torque to be transferred from the transmission to power the equipment. This is a part that is subject to significant wear and tear and will likely require replacement over time or with regular equipment usage. Proper tools may be required to install this part. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this v-belt, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this v-belt is suitable for use on several different models of lawnmowers manufactured by Husqvarna, Homelite, and Poulan. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.
Drive belt for riding mower tractors. Replace when you notice slipping, excessive vibration, or poor performance. Verify fit with your model number.
This replacement v-belt is designed for use in select high-wheeled trimmers. The belt is responsible for driving the cutter head, and is sometimes called the drive belt or trimmer drive belt. It attaches to the axle and the cutter and as the belt rotates, it turns the cutter head so that it can do the trimming. Over time, this belt can become worn, stretched, or twisted. This will require a replacement in order to ensure peak performance of the trimmer. With this OEM trimmer v-belt replacement, it will be easy to get back to work. This genuine OEM v-belt is designed for use in trimmers from Husqvarna, Poulan, Craftsman, Roper, and Weed Eater. It is made of durable composite rubber material and includes a one-year warranty from the manufacturer against defects. Replacing the belt requires a screwdriver and pliers. Always allow the engine to cool completely and wear gloves for hand protection. Beware of pinching or crushing injuries when replacing belts and other tensioned parts. This belt is sold individually and does not include any hardware or additional components.