Kenmore / Sears Washer Cable Or Retainer

The Magnetic Door Plunger is an OEM part for LG washing machines. It is designed to securely hold the door in a closed position during the operation cycle, employing a magnet mechanism for enhanced reliability. The plunger ensures that the door latch is properly engaged, preventing the machine from running if the door is not closed correctly.

Causes of a bad Magnetic Door Plunger can include wear and tear from constant use, failure of the magnetic mechanism due to exposure to moisture or mechanical damage, or a misalignment that prevents the door from closing properly.

Symptoms of a bad Magnetic Door Plunger include:

• The washing machine door not staying closed during cycles.
• The machine failing to start due to a door sensor not detecting closure.
• Random pausing of the machine during operation if the door unlatches.

This OEM LG part is also compatible with Sears/Kenmore.

Cable tie secures wiring bundles and hoses inside your laundry center. Prevents loose routing, rubbing, and rattling noises. Replace if broken or missing.

This bushing protects the appliance service cord where it passes through the cabinet, reducing wear and preventing chafing that can expose wiring. It's a simple replacement that restores a safe cord entry point. What it does:

• Cushions and centers the service cord at the cabinet opening to prevent abrasion
• Helps keep the cord from rubbing on sharp metal edges that can cause insulation damage
• Reduces risk of shorting, sparking, or intermittent power caused by a worn cord
• Commonly replaced when the existing bushing is cracked, missing, or deformed

• One service cord bushing

• Disconnect power (unplug or switch off breaker) before servicing
• Inspect the cord and surrounding insulation; replace the cord if damage is found
• Push the bushing into the cabinet opening, then route the cord through the bushing until seated
• Reuse only if undamaged; do not force a damaged bushing into place

Secures and organizes wires inside your appliance. Replace if broken, loose, or missing to prevent wire damage. Verify fit with your model number.

Secures the drain hose to the washer cabinet or pump. Replace this retainer clip if it's broken, cracked, or missing to keep the hose properly attached.

Spring retainer for washers and laundry centers. Secures internal springs in place. Replace if cracked, broken, or missing to restore proper assembly.

Replace a cracked, broken, or missing washer cable retainer. This small structural component secures cables in place within your washing machine assembly.

Strain relief cable for washers. Secures and protects electrical wiring at connection points. Replace if cracked, damaged, or missing to maintain safe wire management.

Replacement washer cable retainer that secures and holds cables in position. Needed when original retainer is broken, cracked, or missing from assembly.

Secures and holds cables in place inside your washer. Replace if the retainer is cracked, broken, or missing to prevent cable movement and damage.

Secures control cables in your washer. Order this retainer clip if yours is cracked, broken, or missing to properly hold cables in place during operation.

Replacement retainer for washers. Secures and holds components in place during operation. Order a new retainer if yours is cracked, broken, or missing.

Cable retainer for washers. Secures and holds cables in place during operation. Replace if cracked, broken, or missing to properly support wiring.

Small mounting clip that secures internal washer components to prevent movement and vibration. Replace if broken, missing, or worn to maintain alignment.