Log Splitter Bearing Parts
Genuine Mtd part
By: Mtd
Part Number: 935-0149
Prevents friction between moving parts on your lawn tractor. Replace if you notice wobbling, excess noise, or wear. Verify fit with your model number.
More
$7.55
- Compare At:
-
$9.06
- You Save:
-
$1.51
Genuine Mtd part
By: Mtd
Part Number: 741-05060
The bearing sleeve is an authentic part designed for use with lawn tractors of the riding variety. This bearing sleeve is located on the transmission shaft and used to assist in securing the bearing in its place. The location of this part means that it is susceptible to constant vibrations and other threats. This part can wear down over time and eventually require a replacement, or need to be replaced as a result of damage or a direct impact. Using a genuine product like this replacement bearing sleeve will provide an exact fit for compatible models. This genuine OEM bearing sleeve is manufactured to specific standards by MTD. It is compatible with tractors from MTD, RYOBI, Bolens, Yard Machines, Cub Cadet, HUSKEE, Yard Man, and Troy-Bilt. There are hundreds of tractors that can use this specific bearing sleeve. It is made of durable metal and sold as an individual unit. A wrench will be required for this part replacement, but it is an easy task that should not take a lot of time. Always disengage the engine before starting any repairs and ensure that it is not hot to avoid burns or causing potential damage.
More
$10.55
- Compare At:
-
$12.66
- You Save:
-
$2.11
Genuine Mtd part
By: Mtd
Part Number: 941-0155
This ball bearing assembly has a wide variety of uses in a number of gasoline-powered yard tools. Bearings are used to provide smooth, friction-free motion between the rotating parts of equipment where pieces fit together and move. The weight and momentum of the rotating motion are distributed to the ball bearings, which prevents wear on the equipment and allows smooth, repetitive motion. Ball bearings are used in equipment such as tillers and lawn tractors, as well as other power equipment that is self-propelled. The bearings will wear out over time since they are on the receiving end of all the angular momentum of the equipment being used. One of the chief locations where bearing assemblies need to be replaced are the drive wheels of the riding mowers and lawn tractors. The bearings are located in brass housings specifically machined to hold them. Since it can be difficult to remove the old ball bearing assemblies from these housings, it is worth considering simply replacing the entire housing as well as the bearing. These bearings are genuine OEM manufactured replacement parts. They are compatible with MTD, Yard-Man, Troy-Bilt, Husky, Cub Cadet, and Yard Machine lawn tools.
More
$26.15
- Compare At:
-
$29.44
- You Save:
-
$3.29
Genuine Mtd part
By: Mtd
Part Number: 941-0336
Flange bearing for lawn tractors and walk-behind mowers. Replace when you notice excessive noise, wobbling, or difficulty with blade rotation. Verify fit with your model number before ordering.
More
$12.60
- Compare At:
-
$14.99
- You Save:
-
$2.39
Genuine Mtd part
By: Mtd
Part Number: 941-04298
Mandrel bearing for riding mowers and lawn tractors. Replace if spindle makes noise or blade wobbles. Ensures smooth blade rotation. Verify fit by model.
More
$19.41
- Compare At:
-
$23.29
- You Save:
-
$3.88
Genuine Mtd part
By: Mtd
Part Number: 941-0475
This is a bushing made from black plastic with a cleft down the middle to provide enough flex for easy insertion. It has a flanged design, which means it won’t easily pop out after installation, even under stress from constant vibration. The bushing’s primary purpose is to protect wires and cables from damage as they pass through a channel. As such, the material is fairly durable and does not need to be replaced under ordinary circumstances.
That said, there are some situations in which it can become damaged. For one thing, it’s easy to damage while repairing the wires or cables that run through the bushing. If the bushing does need to be replaced, it requires disconnecting any cables or wires that run through the bushing. Pop out the old bushing with a rubber mallet, install the new bushing the same way, reconnect the wires, and the repair is complete.
This is an OEM part sourced directly from MTD, and it is sold individually. It was initially used on snowblowers but has also been used on lawnmowers and lawn tractors.
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Mtd part
By: Mtd
Part Number: 941-0107
Roller bearing for tillers. Replace if you notice rough operation, grinding noise, or difficulty moving parts. Verify fit with your model number.
More
$49.49
- Compare At:
-
$50.86
- You Save:
-
$1.37
Genuine Mtd part
By: Mtd
Part Number: 941-04299
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Mtd part
By: Mtd
Part Number: 741-0356A
$8.71
- Compare At:
-
$9.58
- You Save:
-
$0.87
Genuine Mtd part
By: Mtd
Part Number: 741-04108
$8.95
- Compare At:
-
$10.65
- You Save:
-
$1.70
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 941-0919B
A ball bearing is a common type of rolling-element bearing. It will use balls to keep space between the bearing races and eliminate friction and contact between moving parts. Ball bearings used in lawn and garden equipment ensure that axial loads and radial loads are evenly supported and that there is only a limited amount of rotational friction on the component. It distributes weight evenly, but will undergo constant wear and tear from vibration, heat, and friction and will need replacement regularly. This ball bearing is a genuine OEM part suited to use in Craftsman, Cub Cadet, Ryobi, Troy-Bilt, MTD, Huskee, Yard Machines, Bolens, Mastercut, and Yard-Man equipment. It may be needed for repair work done on a lawnmower, snowblower, tiller, edger, or a log splitter.
More
$22.37
- Compare At:
-
$26.78
- You Save:
-
$4.41
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 741-0133
$35.78
- Compare At:
-
$38.21
- You Save:
-
$2.43
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 951-11369
$34.66
- Compare At:
-
$37.02
- You Save:
-
$2.36
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 750-05313
$2.95
- Compare At:
-
$3.48
- You Save:
-
$0.53
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 735-0652
Spider bushing bearing for log splitters. Replace when you notice excessive play, wobbling, or unusual noise during operation. Verify fit with your model.
More
$53.57
- Compare At:
-
$63.75
- You Save:
-
$10.18
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 741-04548
$9.64
- Compare At:
-
$10.73
- You Save:
-
$1.09
Out Of Stock
Usually ships within 4 - 14 days