Kenmore Refrigerator 106.9751810 (1069751810, 106 9751810) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 4317943
Ice maker not making ice or leaking? This complete ice maker kit replaces corroded contacts and faulty assemblies. DIY-friendly installation in 30-60 minutes.
This part fixes the following symptoms
-
Ice maker dispenses too little ice
-
Ice maker dispenses too much ice
-
Ice maker won't dispense ice
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Broken icemaker Phillip L. • Raymond , MS • March 30, 2024
Replace assembly
Read more
More
$117.77
- Compare At:
-
$140.15
- You Save:
-
$22.38
Genuine Whirlpool part
By: Whirlpool
Part Number: W11384469
Refrigerator light won't turn off or on? The door switch detects when the door opens and closes. Easy 5-minute DIY repair with a pick tool or scraper.
Do-It-Yourself Stories from Customers like You
Fridge interior light kept going out Phil D. • Phoenix , AZ • June 16, 2014
Replaced door switch - it took less than 5 minutes - works perfectly
Read more
More
$29.95
- Compare At:
-
$35.94
- You Save:
-
$5.99
Genuine Whirlpool part
By: Whirlpool
Part Number: 833697
Refrigerator runs warm or freezer not cooling properly? The condenser fan motor circulates air over the coils. DIY repair takes 15-60 minutes with basic tools.
This part fixes the following symptoms
-
Fridge runs too long
-
Noisy
-
Freezer section too warm
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Conderser motor went out David W. • Durand , MI • April 03, 2014
After reviewing the 'how to' video on AppliancePartsPros.com, I unplugged the refrigerator and removed the back cover to access the motor. I then unplugged the wiring and removed the bad motor. I cut the clip plug and wired it to the new motor, installed the fan blade from the old motor and re-installed the new motor. After connecting the clip plug and re-installing the back cover, I plugged the refrigerator in and checked the interior about 5 minutes after the repair. Everything has been...
Read more
More
$64.22
- Compare At:
-
$76.42
- You Save:
-
$12.20
Genuine Whirlpool part
By: Whirlpool
Part Number: W10190935
Ice maker stopped making ice or won't eject cubes? The control module regulates ice production cycles. Simple 3-screw replacement restores function.
This part fixes the following symptoms
-
Ice maker not making ice
-
Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You
Ice maker was freezing up and not dumping properly Frank C. • Worcester , MA • March 04, 2016
SO I FIGURED THAT ALL THE MECHANICAL PARTS OF IT WERE FINE SO THE LOGICAL THING TO DO WAS TO REPLACE ELECTRICAL COMPONENTS WHICH CONSISTED OF THE THERMOSTAT {THE BRAIN} AND THE CONTROL MODULE WHICH I PURCHASED AT A VERY REASONABLE PRICE . I REASSEMBLED THE UNIT AND IT HAS BEEN WORKING LIKE NEW EVER SINCE. THANK YOU!
Read more
More
$69.32
- Compare At:
-
$113.89
- You Save:
-
$44.57
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2315576
The Water Inlet Valve is an OEM replacement part for Whirlpool washing machines. It is a crucial component responsible for controlling the flow of water into the washing machine tub during the fill cycles.
Symptoms of a bad water inlet valve include:
- Washing machine not filling with water or filling slowly
- Leaks or water drips around the valve or water supply connections
- Improper water temperature mixing, resulting in incorrect wash temperatures
- Error codes or warning lights related to water supply or fill issues
Causes of a faulty water inlet valve can include sediment buildup or obstructions within the valve, mechanical wear and tear, electrical malfunctions, or problems with the solenoid that controls the valve's operation.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machines.
Do-It-Yourself Stories from Customers like You
Ice maker wasn't getting water to it Mark D. • Davenport , FL • September 20, 2014
Replaced the water inlet valve on the back of the refrigerator.
Read more
More
$53.95
- Compare At:
-
$66.36
- You Save:
-
$12.41
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4387503
Fixes ice buildup on the back freezer wall and constant running. This defrost thermostat monitors temperature during defrost cycles. 20-minute repair.
This part fixes the following symptoms
-
Frost buildup
-
Freezer too cold
-
Freezer not defrosting
-
Fridge too cold
See more...
Do-It-Yourself Stories from Customers like You
Frost buildup. Food not completely frozen. Running continuously and refrigerator too warm Robert K. • Louisville , KY • February 07, 2021
By reading stories of other customers who had bought this part, the first thing I looked for when troubleshooting my near-18 year old Frigidaire was for the top to be erupted or raised up on the bimetal defrost. It was truly a case of “look for the simple explanation first.” Once I determined that the bimetal defrost appeared to be the culprit, I ordered the part from Appliance Parts Pros. The back panel (evaporator cover) on my freezer was totally encrusted with ice. So I'm waiting for this to...
Read more
More
$31.95
- Compare At:
-
$38.02
- You Save:
-
$6.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP627985
Ice maker stopped making ice? The cycling thermostat monitors temperature to control ice production. DIY-friendly repair with video instructions.
Do-It-Yourself Stories from Customers like You
Ice maker wouldnt make ice Ty G. • Lewis Center , OH • December 30, 2014
I used your online troubleshooting tips and watched the videos on your site. I determined my thermostat was defective, ordered the thermostat which arrived in two days and I replaced the thermostat and I now have a full bin of ice !!!
The do it yourself video was extremely helpful and made the repair very easy.
Thanks so much for the great service and quick delivery !!!
Read more
More
$57.95
- Compare At:
-
$68.96
- You Save:
-
$11.01
Genuine Whirlpool part
By: Whirlpool
Part Number: W11745278
The Bracket-Door Stop is an OEM replacement part for Whirlpool appliances. This zinc-finished bracket is designed to prevent the appliance door from opening beyond its intended range, protecting both the door and surrounding components from potential damage. It ensures the door stays secure and functions smoothly during regular use.
Symptoms of a bad Bracket-Door Stop include:
- The door overextending when opened
- Difficulty in maintaining the door's position
- Visible bending, cracking, or damage to the bracket
Causes of a failing Bracket-Door Stop can include repeated stress from excessive force when opening the door, normal wear over time, or accidental impacts. A damaged bracket can compromise the door's alignment and overall functionality.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Bottom of right door was broken not repairable. Joseph M. • Lombard , IL • August 11, 2023
Replaced the complete door assembly.
Read more
More
$7.64
- Compare At:
-
$8.16
- You Save:
-
$0.52
Genuine Whirlpool part
By: Whirlpool
Part Number: 72017
Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.
Do-It-Yourself Stories from Customers like You
Chipped paint Thomas S. • Middletown , DE • September 03, 2014
Touch up paint
Read more
More
$11.51
- Compare At:
-
$13.70
- You Save:
-
$2.19
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930
Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.
The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.
The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.
Symptoms needing for Appliance Spray Paint include:
- Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
- A desire to refresh or update the appearance of the appliance without the need for complete replacement
- Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$24.95
- Compare At:
-
$29.94
- You Save:
-
$4.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WP681249
Mounting screw for refrigerator ice maker assembly. Secures components to maintain structural integrity. Replace if lost, stripped, or corroded.
Do-It-Yourself Stories from Customers like You
The handle on the refrigerator door was broken and needed to be replaced Richard W. • Baltimore , MD • April 12, 2015
Took off the freezer door, took off the top hinge on the refrigerator door, replaced the handle, re-installed the top hinge and the freezer door. This is a two person job - one to remove the top hinge and replace the handle, while a second person holds the refrigerator door in place. Replacing the handle was easy. The most irritating part was figuring out what parts to order. The drawing of the refrigerator door (Drawing # 4) used to figure out what parts to order was not clear. I paid $8...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2196157
The Icemaker Fill Tube Fitting is an OEM part for Whirlpool refrigerators. This part connects the water supply line to the icemaker, ensuring a seamless and leak-free delivery of water into the icemaker mold.
Causes of a bad Icemaker Fill Tube Fitting can include wear and tear over time, mineral buildup from hard water, which can block the water flow or damage the fitting, and improper installation that may lead to leaks or restricted water flow.
Symptoms of a bad Icemaker Fill Tube Fitting include:
- Water leakage at the connection points, leading to potential water damage or ice buildup in the freezer
- Insufficient ice production if the fitting is partially blocked or not properly connected, restricting water flow to the icemaker
- Unusual noise during the icemaker fill cycle, indicating a potential issue with the fitting
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
This part fixes the following symptoms
-
Not dispensing water
-
Ice maker not making ice
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Ice maker fill tube leak Chad M. • Hollywood , FL • May 16, 2015
I watched your how-to video. It explained the repair PERFECTLY.
It was an easy repair and the video was very detailed. It took the guesswork out of the repair.
I was done in 5 minutes.
thanks for taking the time to post videos for your parts. I'll shop here again.
Best Regards,
Chad M
Read more
More
$9.60
- Compare At:
-
$11.52
- You Save:
-
$1.92
Genuine Whirlpool part
By: Whirlpool
Part Number: W10823511
The Ice Maker Water Line is an OEM part for Whirlpool refrigerators. It supplies water from the household plumbing to the ice maker, ensuring a consistent and reliable production of ice cubes. This kit includes a 1/4-inch plastic water line that is approximately 72 inches long. The tubing will need to be cut to match the desired length.
Causes of a bad water line can include wear and tear from prolonged use, kinks or bends restricting water flow, or leaks due to punctures or cracks. A compromised water line can result in inadequate ice production or water leaks.
Symptoms of a bad ice maker water line include:
- Reduced or no ice production
- Leaking water from the refrigerator
- Visible cracks or damage to the water line
- Ice cubes that are smaller than usual
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Not dispensing water
-
Ice maker not making ice
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Ice maker fill tube leak Chad M. • Hollywood , FL • May 16, 2015
I watched your how-to video. It explained the repair PERFECTLY.
It was an easy repair and the video was very detailed. It took the guesswork out of the repair.
I was done in 5 minutes.
thanks for taking the time to post videos for your parts. I'll shop here again.
Best Regards,
Chad M
Read more
More
$26.74
- Compare At:
-
$31.82
- You Save:
-
$5.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489357
The Screw is an OEM fastening component specifically designed for securing interior panels and assemblies of Whirlpool brand appliances.
Causes of a problematic screw include stripping, corrosion, or shearing from repeated installations and removals during service procedures.
Symptoms of faulty screws include:
- Loosened or detached interior panels rattling behind appliance exteriors
- Reduced structural integrity allowing unnecessary vibrations and noise
Compatible models include brands produced by KitchenAid, Maytag, and some Kenmore.
Do-It-Yourself Stories from Customers like You
Broken refrigerator handle Paul M. • Mechanicsville , VA • May 06, 2019
I ordered a new handle from Applisnce Parts Pros. It fit the refrigerator perfectly. I reused some of the old screws and ordered one new screw with a cover to attach the bottom of the handle.
Now the refrigerator looks as good as new!
Read more
More
$7.31
- Compare At:
-
$8.70
- You Save:
-
$1.39
Genuine Whirlpool part
By: Whirlpool
Part Number: 4386917
Secures door shelf bars in refrigerator doors. Replace broken, cracked, or missing end caps to keep shelves stable and prevent bars from falling out.
Do-It-Yourself Stories from Customers like You
Broken shelf bar end cap on whirlpool refrigerator David K. • El Dorado Hills , CA • October 31, 2014
I can't believe that we lived with this shelf bar continually falling off for years due to a broken end cap. Easily found the replacement end cap on AppliancePartsPros for our 18 year old refrigerator. The "repair", if you can call it that, took perhaps 30 seconds -- remove old broken end cap, insert new one. Done. No more shelf bar falling off. One of life's little annoyances just went away.
Read more
More
$18.95
- Compare At:
-
$22.55
- You Save:
-
$3.60
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2183400
Freezer frosting up or refrigerator not cooling? The defrost timer controls the defrost cycle. DIY-friendly repair, typically 30 minutes to install.
This part fixes the following symptoms
-
Freezer section too warm
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Freezer frosting up Nathan F. • Belgrade , MO • April 17, 2015
Replaced the heater, timer, and wiring harness
Read more
More
$61.95
- Compare At:
-
$73.72
- You Save:
-
$11.77