Thermador Cooktop PCS486GL Parts
Genuine Bosch part
By: Bosch
Part Number: 00189324
This is a cooktop burner igniter OEM replacement part for Bosch cooktops and ranges and is sold as an individual part. This part creates a spark that ignites the burner within your cooktop or stovetop and is made of a combination of metal and ceramic.
Causes of a bad ignition plug can include issues with the electronic module, worn electrodes that no longer spark reliably, or damaged wiring.
Symptoms of a bad ignition plug include:
- Gas burners that will not light or remain lit
- Delayed ignition of one or more burners
- Intermittent or no sparking from the ignition plug
This OEM Bosch part is also compatible with Thermador, Gaggenau and some Kenmore models.
Do-It-Yourself Stories from Customers like You
"welded" venturi tube missing o rings broken gas line James F. • San Diego , CA • April 10, 2016
My 18+ year old Jennair cooktop, PN CCG2520W was in need of a rebuild b/c of a welded venturi tube on the right front [RF] burner. In order to remove the glass top cover, you MUST remove the venturi tube. To do this you have to DRILL-OUT the venturi tube which requires a new venturi and orifice holder. The repair was difficult b/c most of the parts are no longer available. But then I found a ray-of-hope.
I was able to find some Jennair (Maytag) parts but they are scarce. Later I found...
Read more
More
$35.48
- Compare At:
-
$42.58
- You Save:
-
$7.10
Genuine Bosch part
By: Bosch
Part Number: 00413552
The Grate Foot Kit is an OEM part for Bosch ranges. This kit includes the small rubber feet that attach to the bottom of the range grates, providing stability and preventing the grates from scratching the range surface.
Over time, the grate feet can wear out or become damaged due to exposure to high temperatures, regular cleaning, or accidental impact. Missing or worn-out feet can cause the grates to sit unevenly or scratch the range surface.
Symptoms of a bad grate foot kit include:
- The range grates sitting unevenly or wobbling
- Scratches or damage on the range surface
- Grates sliding or shifting during cooking
- Missing or visibly worn-out rubber feet
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Was told 2 burners had no ignition or gas and 2 others had gas but wouldn't ignite Charles W. • Granger , IN • December 16, 2014
Bought a Thermador PRSE48" dual fuel range from Craigslist really cheap because it didn't work. Did a little research and decided to overhaul most of the top (gas) end. For what I paid for it it was worth it and I'd have a good stove with new components. Replaced the griddle thermostat, ignition micro switches, ignition re-igniter box, installed fixing kit with 2 new potentiometers, both solenoids, and gas regulator. Had to replace 2 gas lines, all 4 jets, and one brass nut that were...
Read more
More
$25.60
- Compare At:
-
$30.72
- You Save:
-
$5.12
Genuine Bosch part
By: Bosch
Part Number: 00189023
Venturi tube for gas ranges and cooktops. Mixes gas and air for proper burner combustion. Replace if cracked, corroded, or threads are damaged.
Do-It-Yourself Stories from Customers like You
"welded" venturi tube missing o rings broken gas line James F. • San Diego , CA • April 10, 2016
My 18+ year old Jennair cooktop, PN CCG2520W was in need of a rebuild b/c of a welded venturi tube on the right front [RF] burner. In order to remove the glass top cover, you MUST remove the venturi tube. To do this you have to DRILL-OUT the venturi tube which requires a new venturi and orifice holder. The repair was difficult b/c most of the parts are no longer available. But then I found a ray-of-hope.
I was able to find some Jennair (Maytag) parts but they are scarce. Later I found...
Read more
More
$37.23
- Compare At:
-
$43.93
- You Save:
-
$6.70
Genuine Bosch part
By: Bosch
Part Number: 00189322
The Igniter Mounting Clip is an OEM part for Bosch ranges. It secures the igniter to the range top, ensuring it is properly aligned and stable for optimal ignition performance. The surface igniter is crucial for the ignition of gas burners, facilitating an immediate and safe flame to cook with.
Over time, the Igniter Mounting Clip can succumb to various forms of wear and tear, including corrosion from exposure to moisture, degradation from frequent heating cycles, or physical damage during cleaning or maintenance activities.
Symptoms of a compromised Igniter Mounting Clip include:
- The surface igniter becoming loose or dislodged
- Difficulty in igniting the burner or uneven flames
- Noisy or irregular ignition sounds
- Visible signs of damage or corrosion on the clip
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Thermador gas range prg 304us left front burner inop Richard C. • Pflugerville , TX • February 27, 2018
Symptoms: would not light & no gas smell/flow. R&R'd gas solenoid which fixed it. Other parts were in addition to primary inop burner.
Read more
More
$6.42
- Compare At:
-
$7.64
- You Save:
-
$1.22
Genuine Bosch part
By: Bosch
Part Number: 00753257
The Spark Module is an OEM part Bosch ranges and cooktops. This electronic part generates the high-voltage spark needed to reliably ignite the gas burners with the push of a button.
Causes can be issues like component failure over the thousands of ignitions it facilitates. Water ingress could also potentially cause problems.
Symptoms of a bad spark module include:
- Unreliable or intermittent burner ignition requiring multiple ignition button presses
- One or more burners that will not ignite at all
- Occasionally flashing or error codes relating to ignition issues
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Was told 2 burners had no ignition or gas and 2 others had gas but wouldn't ignite Charles W. • Granger , IN • December 16, 2014
Bought a Thermador PRSE48" dual fuel range from Craigslist really cheap because it didn't work. Did a little research and decided to overhaul most of the top (gas) end. For what I paid for it it was worth it and I'd have a good stove with new components. Replaced the griddle thermostat, ignition micro switches, ignition re-igniter box, installed fixing kit with 2 new potentiometers, both solenoids, and gas regulator. Had to replace 2 gas lines, all 4 jets, and one brass nut that were...
Read more
More
$173.95
- Compare At:
-
$207.00
- You Save:
-
$33.05
Genuine Bosch part
By: Bosch
Part Number: 00188978
Used to hold down the jet holder assembly.
Do-It-Yourself Stories from Customers like You
Left rear variable simmer gas burner on thermador prg364glus stopped working David B. • Lincoln , NE • February 23, 2017
First and foremost, don't believe everything you see on Youtube. In order to get to the gas solenoid that feeds the burner you MUST take the entire top off that side of the range. Remove the grates and burner tops. You will see 2x 20mm brass nut, or so it appears, that hold each burner in place on the splash/drip pan. It is not just a nut, it is a venturi that threads down into what is called the jet holder. You may get a socket on it and think you are getting it loose but, more than likely you...
Read more
More
$15.71
- Compare At:
-
$18.69
- You Save:
-
$2.98
Genuine Bosch part
By: Bosch
Part Number: 00411253
Burner won't light or has no gas flow? This top burner valve controls gas to individual burners. Moderate DIY repair with basic tools needed.
Do-It-Yourself Stories from Customers like You
Was told 2 burners had no ignition or gas and 2 others had gas but wouldn't ignite Charles W. • Granger , IN • December 16, 2014
Bought a Thermador PRSE48" dual fuel range from Craigslist really cheap because it didn't work. Did a little research and decided to overhaul most of the top (gas) end. For what I paid for it it was worth it and I'd have a good stove with new components. Replaced the griddle thermostat, ignition micro switches, ignition re-igniter box, installed fixing kit with 2 new potentiometers, both solenoids, and gas regulator. Had to replace 2 gas lines, all 4 jets, and one brass nut that were...
Read more
More
$212.95
- Compare At:
-
$253.41
- You Save:
-
$40.46
Genuine Bosch part
By: Bosch
Part Number: 00428049
The Spark Ignition Switch is an OEM part for Bosch ranges and cooktops. It controls the ignition of surface burner flames by emitting an electrical spark when activated.
Causes of a bad switch can be general wear and fatigue over thousands of start cycles. Exposure to moisture, dust or metal debris could also damage electrical components internally.
Symptoms of a bad spark ignition switch include:
- Burners failing to light even when valves are turned on
- Intermittent or irregular lighting of some burners
- No electrical sparks emitted from the ignition electrode
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Do-It-Yourself Stories from Customers like You
One igniter not working Roger C. • Sequim , WA • May 16, 2017
Replaced switch that's attached to burner valve.
Read more
More
$18.95
- Compare At:
-
$22.55
- You Save:
-
$3.60
Genuine Bosch part
By: Bosch
Part Number: 00415498
Jet holder securely houses the orifice assembly on gas range burners. Replace if cracked, corroded, or heat-damaged. Ensures proper gas flow and ignition.
Do-It-Yourself Stories from Customers like You
Left rear variable simmer gas burner on thermador prg364glus stopped working David B. • Lincoln , NE • February 23, 2017
First and foremost, don't believe everything you see on Youtube. In order to get to the gas solenoid that feeds the burner you MUST take the entire top off that side of the range. Remove the grates and burner tops. You will see 2x 20mm brass nut, or so it appears, that hold each burner in place on the splash/drip pan. It is not just a nut, it is a venturi that threads down into what is called the jet holder. You may get a socket on it and think you are getting it loose but, more than likely you...
Read more
More
$34.95
- Compare At:
-
$41.59
- You Save:
-
$6.64
Genuine Bosch part
By: Bosch
Part Number: 00487244
This 1/4-inch gas supply tube routes fuel between internal gas components to deliver a stable, leak-resistant supply to the burner. Replacing a damaged tube helps restore safe operation and consistent burner performance.
- Carries gas between internal components (such as the valve/manifold and burner)
- Maintains a sealed pathway to prevent leaks
- Helps ensure proper ignition and flame size
- Common signs of failure: visible kinks, cracks, or corrosion; weak/no flame; gas odor near the tube
What's included: 1 gas supply tube Installation notes:
- Shut off gas supply and power before servicing; work in a well-ventilated area
- Match original routing and orientations; avoid kinks and sharp bends
- Tighten fittings to manufacturer guidance; do not overtighten
- Leak-test all joints with approved leak-detection solution and verify burner operation
Do-It-Yourself Stories from Customers like You
Had to replace the igniter. In doing so I found the venturi tube frozen and put alot of pressure to remove it. I twisted the jet holder and gas tube right out had to cut out the venturi to get to Kelly H. • Malibu , CA • May 12, 2020
I had to cut out the venturi with one of those vibrating tools with a narrow metal blade like a hack saw. Takes time and wear your ear plugs . I had two different repair guys here they both said I need a new range . It's 15 years old and 9 grand to replace it. No No . I'll fix it and I did .
Read more
More
$33.95
- Compare At:
-
$40.40
- You Save:
-
$6.45
Genuine Bosch part
By: Bosch
Part Number: 00415012
The Burner Head and Cap Assembly is an OEM part for Bosch ranges and cooktops. It contains the burner itself along with its protective cover.
Cracks or misshapen portions disrupt flame stability leading to inconsistent results.
Symptoms of a failed assembly include:
- Irregular or overly high flames from damage exposing gas jets
- Difficulty igniting or flames extinguishing prematurely
- Singed pans lacking the protection of an intact cap
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Do-It-Yourself Stories from Customers like You
The burner cap on my gas stove was warped and the resulting flame pattern was so uneven that i couldn't use the burner Marsha S. • Kittery Point , ME • March 22, 2015
Our appliance repairman said he would order a new burner cap. We waited 7 months; each time we called he said it was on order. After having to cook Thanksgiving and Christmas dinners on 3 burners we gave up and ordered the part ourselves. It took 5 days to get here and less than one minute to install; it fit perfectly and works like new.
Read more
More
$200.42
- Compare At:
-
$238.50
- You Save:
-
$38.08
Genuine Bosch part
By: Bosch
Part Number: 00754658
Controls gas supply pressure to burner manifold. Replace if regulator is cracked, sticking, or no longer maintaining correct pressure for consistent flames.
More
$69.95
- Compare At:
-
$83.24
- You Save:
-
$13.29
Genuine Bosch part
By: Bosch
Part Number: 00368934
This 1/4-inch gas supply tube routes fuel between internal components of the appliance, such as the regulator/manifold and valve or burner assembly. Replacing a damaged line helps restore safe, consistent gas flow and dependable burner operation.
- Carries gas from the regulator/manifold to downstream valve/burner components
- Direct replacement for a kinked, cracked, or corroded tube
- Maintains proper routing and secure, sealed connections inside the unit
What's included: One gas supply tube (1/4 in.) Installation notes:
- Shut off gas and power; allow the unit to cool and ventilate the area before service
- Support fittings with two wrenches; avoid over-torquing and do not kink the tube
- After installation, check all joints with an approved leak-detection solution—never an open flame
Do-It-Yourself Stories from Customers like You
Was told 2 burners had no ignition or gas and 2 others had gas but wouldn't ignite Charles W. • Granger , IN • December 16, 2014
Bought a Thermador PRSE48" dual fuel range from Craigslist really cheap because it didn't work. Did a little research and decided to overhaul most of the top (gas) end. For what I paid for it it was worth it and I'd have a good stove with new components. Replaced the griddle thermostat, ignition micro switches, ignition re-igniter box, installed fixing kit with 2 new potentiometers, both solenoids, and gas regulator. Had to replace 2 gas lines, all 4 jets, and one brass nut that were...
Read more
More
$29.95
- Compare At:
-
$35.64
- You Save:
-
$5.69
Genuine Bosch part
By: Bosch
Part Number: 00415053
This pilot light lens covers and diffuses the control-panel indicator lamp. Replace a cracked, missing, or discolored lens to restore clear visibility of the light, protect the lamp opening, and keep the panel looking finished.
- Covers and diffuses the indicator lamp on the control panel
- Helps protect the lamp opening from debris and accidental contact
- Restores a clean, finished appearance to the panel
- Replace if the lens is cracked, missing, loose, or discolored
- Can help when the indicator is hard to see even when lit
What's included: One pilot light lens Install notes:
- Disconnect power to the appliance before servicing and allow surfaces to cool
- Access the indicator opening from the front or rear (varies by design) and remove any retainer or clips holding the old lens
- Note orientation and transfer any existing retainer or gasket if present
- Seat the new lens fully, reassemble, and test the indicator light
More
$6.95
- Compare At:
-
$8.20
- You Save:
-
$1.25
Genuine Bosch part
By: Bosch
Part Number: 00487243
Gas supply tube connects gas line to range burners. Replace if cracked, kinked, damaged, or leaking. Installs between supply valve and burner assembly.
Do-It-Yourself Stories from Customers like You
Left rear variable simmer gas burner on thermador prg364glus stopped working David B. • Lincoln , NE • February 23, 2017
First and foremost, don't believe everything you see on Youtube. In order to get to the gas solenoid that feeds the burner you MUST take the entire top off that side of the range. Remove the grates and burner tops. You will see 2x 20mm brass nut, or so it appears, that hold each burner in place on the splash/drip pan. It is not just a nut, it is a venturi that threads down into what is called the jet holder. You may get a socket on it and think you are getting it loose but, more than likely you...
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Bosch part
By: Bosch
Part Number: 00415017
1/4" gas supply tubing connects your range's gas line to the valve. Replace when damaged, cracked, leaking, or during valve service for safe operation.
More
$55.50
- Compare At:
-
$65.49
- You Save:
-
$9.99