Poulan Lawn Mower Control Cable

This clutch cable kit is an authentic OEM replacement part for a riding lawn mower or tractor. The clutch cable connects to the idler arm located in the lower deck of a mower and allows the operator to manually engage or disengage the blades. The clutch cable runs up through the steering block and into the front display so that the operator can easily access the clutch. If a clutch cable becomes jammed or tenses up, it will be difficult to depress. If the operator tries to depress the clutch cable without realizing that it is jammed, the clutch cable will snap. The most obvious sign of a snapped clutch cable is that the clutch gives little resistance and the blade cannot be engaged. To change a clutch cable, use a socket set to remove the fuel tank and gain access to the cable. A pair of needle nose pliers is also recommended. This replacement part is compatible with Weed Eater, Husqvarna, Ryobi, and Poulan appliances and comes sourced from its original manufacturer. This part includes a clutch cable and a zip tie.

This part is a replacement zone control cable. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken zone control cable in a variety of lawn mower models. The zone control cable is essential to safe use of the mower as it stops the engine should the user let go of the handle. This part will require replacing if stretched, snapped, or rendered ineffective. When working on or near an enginee, it is important to ensure the equipment is powered down and completely cool before beginning repairs. For more accurate information on how and where to place this zone control cable, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this zone control cable is suitable for use on lawn mowers manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

Drive control cable for self-propelled walk-behind mowers. Engages the propulsion mechanism gears. Replace if cable is frayed, broken, or stuck.

Mechanical clutch cable for riding mowers with lever-operated transmissions. Replace if cable is frayed, stretched, broken, or no longer engages smoothly.

Control cable connects handles to engine and blade system on walk behind mowers. Replace if cable is sticking, frayed, or broken for proper speed control.

Control cable connects engine to safety control bar on walk-behind mowers. Replace if cable is frayed, broken, or detached. Installs between handle and engine.

Replacement drive control cable for walk behind lawn mowers. Installs to connect drive mechanism. Replace if snapped, worn, frayed, or damaged.

Replacement engine zone control cable for walk behind lawn mowers. Installs between control handle and engine zone. Replace if cable is frayed, broken, or damaged.

This is an engine zone control cable, also known as a control cable, manufactured by Husqvarna. This component stops the blade when a lawn mower handle is released. When this part goes bad, it can cause the brake not to release even when the handle is pressed down. Engine zone control cables are known for experiencing wear and tear with regular use. If the cable has any signs of damage, cracking, wear, or stretching, it will need to be replaced. First, disconnect the spark plug wire before releasing the cables from the handle. Next, remove the drive cover before removing the engine zone control cable. The replacement engine zone cable can be connected to the transmission and the drive cover can be replaced. Install the control cable back onto the mower handle, reconnect the spark plug wire, and the lawn mower will be usable again. This is a genuine OEM replacement part that comes directly from the manufacturer. It can be used for mowers from Husqvarna, Weed Eater, AYP, Craftsman, RedMax, Poulan, Poulan Pro, Jonsered, and McCulloch. It is sold individually, and the replacement is considered easy. A screwdriver and pliers are the only tools that will be needed.

Throttle control assembly for front-engine lawn tractors. Mounts to dashboard or control panel. Replace if cable is broken, handle is cracked, or missing.

Control cable for snow blowers. Connects operator controls to engine mechanisms. Replace if cable is frayed, broken, kinked, or won't engage properly.

Control cable for riding mower throttle or choke operation. Installs from operator controls to engine. Replace if cable is frayed, broken, or stuck.

Control cable assembly for gas snowblowers. Connects control lever to operational mechanism. Replace if cable is frayed, broken, kinked, or missing.

This is a manual cable clutch for use on many different kinds of lawn tractors and riding mowers. It is the part that connects the transmission lever to the idler arm on the deck of the mower. The sole purpose of this component is to engage and then to disengage the blades. It is for a machine with a manual clutch and includes the full assembly. This means it features the spring hook, connector clips with cable sheath, and the cabling itself. It is relatively simple to replace this item and requires an appropriately sized socket set. Made of rubber, metal, and wire, it is a genuine OEM part that ships individually as an assembly. It will work with brands like Poulan, Jonsered, Weed Eater, and Husqvarna, among others.

Control cable for gas walk-behind mowers. Connects handlebar controls to engine or drive mechanism. Replace if cable is frayed, broken, or worn.

Drive control cable for walk-behind lawn mowers. Connects handle controls to transmission drive system. Replace if cable is frayed, stretched, or broken.