Pruner Starter

If your chainsaw rope won't retract after pulling, the starter spring likely needs replacement. This spring creates the recoil to start the engine.

Starter won't pull freely or rope doesn't retract? This recoil starter spring retracts the pull cord and activates your engine. Simple DIY repair in minutes.

Engine won't engage when pulling starter rope? The starter pawl bridge connects the flywheel to spin your trimmer's engine. Easy DIY repair.

This replacement starter spring is a genuine OEM model from Husqvarna. The starter spring, also sometimes called the recoil spring or recoil starter spring, is part of the entire starter assembly. It attaches to the fan and flywheel housing and is responsible for helping to retract the starter rope when it is pulled to engage the engine. Over time, the spring can wear out or become twisted. This can cause the starter rope to no longer retract or it can even seize up the entire starter assembly. Replacement of the spring is the only option and this OEM part can provide an exact fit for select engines. This part is designed for use with blowers, edgers, trimmers, and pruners that feature Husqvarna engines and that are manufactured by brands like Weed Eater, Poulan, and Husqvarna themselves. The starter spring is made of durable metal and is sold individually. Always disengage the spark plug and allow the engine to cool completely before beginning and repair projects, and protect the hands by wearing gloves.

Can't start your leaf blower or trimmer? A broken starter handle prevents the pull cord from engaging the engine. This replacement handle restores easy starting in minutes.

If your trimmer won't start when pulling the cord, the starter pawl may be worn or broken. This small part engages the engine during pulls.

This is a rope guide that is used with various types of lawn and garden equipment. It connects the rope handle and the starter rope. It helps prevent damage to either of the ropes by covering them in durable plastic material. Over time or through use, the rope guide can become damaged or break. If this happens, the part will need to be replaced. First, put the equipment on a flat surface. Drain the fuel from the tool and disconnect the spark plug wire. Next, the starter will need to be removed from the tool to gain access to the rope guide. The rope guide and any other damaged components, such as the string and springs, can be removed from the tool before adding a replacement component. This is an authentic OEM replacement component that is sourced directly from the manufacturer. It is sold as an individual part. The rope guide is compatible with string trimmers, leaf blowers, hedge trimmers, and pole pruners manufactured by Little Wonder, Echo, and Shindaiwa.

This OEM starter assembly is necessary for starting the handheld lawn and garden equipment. The starter assembly includes an orange plastic cover/housing and a black pull handle that's attached to a starter pulley assembly with a white pull rope. Please note that the fasteners to attach this to the machine are not included with this starter assembly part and must be ordered separately.A new starter assembly may be needed if the cover/housing is broken, the pull handle is broken, the rope is broken, or if any part of the pulley system is broken. If the rope does not retract, this is another sign that a new starter assembly is needed.This is a genuine Husqvarna part sourced directly from the manufacturer and sold individually. This part is compatible with outdoor power equipment manufactured by Husqvarna including edgers, hedge trimmers, pole saws, saws, and grass trimmers.

This starter pawl is a high-quality component used with lawn and garden equipment made by Husqvarna. The starter pawl is one of the components that make up the recoil starter mechanism. It connects the recoil pulley to the flywheel so the lawn equipment can work properly. When a starter rope is tugged, it spins the starter pawl which sets the flywheel into motion so the engine can start.If the starter pawl is damaged or broken, it will need to be replaced. A starter pawl with problems will make it impossible to start the lawn tool. The replacement process may require the use of a screwdriver and a hex key. The starter rope housing should be removed first to get access to the starter pawl. Take out the old starter pawl and replace it with the new one before reassembling the equipment.This starter pawl is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The pawl is created to be compatible with hedge trimmers, string trimmers, pole pruners, and edgers manufactured by Husqvarna.

Line trimmer won't start or pulls hard? This starter pulley kit restores easy starting. Moderately easy DIY repair for gas-powered trimmers.

Won't start or rope won't retract? This recoil starter pulley kit restores pull-start function on gas leaf blowers and line trimmers. DIY-friendly.

Trimmer won't start or rope won't retract? This starter cup assembly rotates the flywheel to power your engine. Direct-fit part for many trimmers.

A starter rope is wrapped around the recoil drum starter pulley. The starter spring creates tension for the rope to recoil. It is 2.25 inches in diameter on the outside of the pulley and 0.25 inches in diameter on the inside of the pulley. If the starter spring has gone bad, consider replacing the recoil drum starter pulley while repairing the other part. It may be that the damage of the starter spring has chipped the drum, or the drum may be worn from the friction of spinning as the rope uncoils and recoils. If the recoil drum starter pulley is damaged, it may not spin freely. This could prevent the engine from starting. The replacement of this part should be quick and easy and only requires a screwdriver and pliers to complete. The recoil drum starter pulley works with trimmers, hedge trimmers, pole saws and pruners, leaf blowers/vacuums, small engines, chipper shredders, edgers, tillers, and water pumps manufactured by Echo, Little Wonder, Mantis, and Shindaiwa brands. It is a genuine OEM part.

This starter rope is designed for use with several lawn and garden tools, including as hedge trimmers. It is wrapped around the starter pulley and can be manually pulled on to get the engine to start up. After wear and tear or a lot of use, the rope can start to fray and weaken. Given more time, the starter rope will completely break and no longer be useable. Many people will realize the starter rope is broken when pulling on it and receiving a line of rope in their hands. If the starter rope is broken, it needs to be replaced. First, the spark plug needs to be removed to prevent the engine from powering on. Next, the starter rope can be removed from the guide. The engine cover and fuel tank will need to be removed, as well as the dipstick tube and blower housing. Next, the recoil spring should be rewound before threading the new rope into the pulley. This is an individual genuine OEM component that comes directly from the manufacturer for the highest quality. It can be used with Echo, Little Wonder, and Shindaiwa trimmers, chipper shredders, leaf blowers, and hedge trimmers. A replacement will require basic tools like screwdrivers and a socket wrench.