Bob Cochran March 23, 2020 for Model Number HMC80251UC/01 I've purchased a replacement control panel for my HMC80251UC/01 microwave and it configured differently in 2 ways. The old board has a ground wire soldered to the PC board. There doesn't seem to be a way to connect this on the replacement part. Is it needed and if so, how does it connect? The replacement part has a connector labeled CN8 that is not on the old board. What is this for and how should it be connected?
1 Answer Bob C, From what I see the board for your microwave has been discontinued by the manufacturer. It is likely you have the wrong board and it doesn't sound like it would be compatible. Read More...
Margarita July 09, 2019 for Model Number HMC87151UC/01 Panel light on Bosch microwave out but works fine. I'm just flying blind
1 Answer Margarita, as the display is not operating, the control assembly 00771183 would need to be replaced. Unfortunately, the manufacturer has discontinued this part and it is no longer available. The manufacturer has not listed an approved substitute for this part either. Read More...
Tim October 25, 2018 for Model Number HMC80251UC/01 Looking for a pc board for my Bosch microwave (led display is very dim). What part would I order for this?
1 Answer Hello Tim, You would need to replace 00771183 for this issue. I'm sorry but this part has been discontinued by the manufacturer and no satisfactory substitutions have been provided. You may be able to see if a company like Corecentric Solutions 866-737-2244/ corecentricsolutions.com supports the board 00771183. If so, they can refurbish the board for you. Thank you for your patience and understanding in this matter. Read More...
Eric July 07, 2018 for Model Number HMC80252UC/01 Like many others, I am having trouble with a dim display. I have purchased a replacement motherboard. How do you access the mother board? The stainless steel cover has a number of clips. I have bent back the top ones and have tried to pop the cover off. It does not move. Do I access the mother board from the back? Does the cover pop off from the front or is there a different approach?
1 Answer Eric, To access the control board you will need to slide the unit out and remove the screws at the top of the control panel and then there should be a couple under the control panel. This will give access to the board. Read More...
Richard March 20, 2018 for Model Number HMC80251UC/01 I have a Bosch Speed Oven (HMC80251UC/01) and the display has gone dim. Is there a schematic for the PC Board AP5953625 that would help me in determining which capacitors to replace on the board?
1 Answer Richard, Unfortunately the manufacturer does not provide a diagram on the control board to determine what capacitor may be bad. Read More...
Barber March 08, 2018 for Model Number HMC80151UC/01 Has the board been revised to eliminate design errors that result in failure? Can I get the board without the display and sheetmetal?
1 Answer Barber, Unfortunately we do not have information on design changes of the board but the part number you would need is 00771183. Read More...
Dom February 02, 2018 for Model Number HMC87151UC/01 My Bosch 27" speed oven panel lite has gone dim. Can you tell me which part needs to be replaced and the price? Anything you can help instruct me on replacing it is appreciated. Thank you
1 Answer Hello Dom, I'm sorry but this part 00771183 has been discontinued by the manufacturer and no satisfactory substitutions have been provided. Thank you for your patience and understanding in this matter. Read More...
Walter October 20, 2017 for Model Number HMC80251uc/01 How do I access the board for replacing the PC control panel part pc-board-00771183? Do I need to pull the whole comb oven out to access the top microwave panel or is there a way to pop the front SS cover off? Lastly is this something a person with good mechanical skill can replace or do I need a professional?
1 Answer Hello Walter. Yes, you will need to remove the top cover to access and replace the board. Just make sure you go wire by wire when replacing the board so it is wired properly. If not, the unit will not work right and you could possibly damage the board in the unit. Read More...
Roger E October 12, 2017 for Model Number Bosch HMC80151UC/01 I see other questions related to the same issue I'm having with my Bosch Microwave Speed Oven...dim LED Display. Replace the PC Board, part 00771183, seems to be the answer. How do I replace the PC Board in this unit?
1 Answer Roger, You would remove the air grill on the unit and then remove a screw that would hold the control panel in place. Once removed you will have access to the control board. Read More...
Abby K August 29, 2017 for Model Number Bosch HMC87151UC/01 I see a previous question about a dim display and asking if part/assembly 102 would fix it. You gave another part number and said it's not available. Does part/assembly 102 include the display? If I have to spend the extra $ to get the whole assembly, I will.
1 Answer Abby, Yes part 102 on the diagram does have the display with it and is part number 00771183. Read More...