Gord February 10, 2016 for Model Number LRG3095ST Hello, I require a propane conversion kit for LRG3095ST, a LG gas range. What is the part number you recommend for this range. Thanks Gord
Jinny January 21, 2016 for Model Number LRG30855ST What LP gas conversion kit do I need for model LRG3085ST/00 serial number 409MMKCK2053 ? I ordered a EBZ37171903 kit at a local parts store but the thread end of the orifice is too small in diameter for the threaded receiver and the overall size is smaller than the one I removed. This is a Gas cooking range.
1 Answer Hello Jinny. Based on the model number you provided, EBZ37171903 is the correct conversion kit needed for the unit. Read More...
Efrain October 20, 2015 for Model Number lrg3081st I'm trying to convert natural to propane. Which part do I need?
1 Answer Hello Efrain, You will need to order conversion kit EBZ37171903 if the model number is actually LRG30855ST. I'm sorry but the model number provided needs to be verified on the units' I.D. tag since it is not coming up as valid. Read More...
Royce L. October 03, 2015 for Model Number MGR5745ADA What part set do I need to convert this to LP gas service?
1 Answer Hello Royce, This unit requires no parts for its' conversion. It is done by adjusting the hoods. To adjust to LP gas, tighten the hoods clockwise 1 1/2 to 2 turns without overtightening. You will also remove the large nut on top of the regulator and flip the gas stop found under this nut over to the LP setting. Read More...
Gord August 06, 2015 for Model Number LG gas range model LRG3081ST What conversion kit do I need to convert range to LP?
Angel July 28, 2015 for Model Number LRG30855ST Lg gas range...I need part numbers for the 5 orifices to convert from lp back to natural gas. 4 burners & the griddle in the middle.
1 Answer Angel, To go from LP to natural gas you will need one of each of the following orifices Right front EBZ37186402, left front EBZ37186403, center EBZ37186404, Right rear EBZ37186405, and left rear EBZ37186401. Read More...
Rich May 14, 2015 for Model Number ldg3036st I have a LDG3036St gas range and want to take out the middle burner orifice / nozzle and replace it with a bigger one. The current nozzle is 8,000 btu and I want to replace it with a 12,000 btu nozzle. Do you have a part number for this 12,000 btu nozzle? Thanks, Rich
1 Answer Rich, This would not be a recommended conversion. There is a reason the center burner is rated at 8,000 BTUs. A 12,000 BTU burner will generate a lot more heat that will be reflected back into the cooktop and will also reflect up and into the control console damaging the console, touch pad assembly and control. It would also involve more parts than the orifice/nozzle. Read More...
Nancy January 02, 2015 for Model Number LRG3081ST I need a conversion kit to take the gas stove I bought to LP. What part number do I order? Thank you
1 Answer Hello Nancy, If your model number is LRG30355ST, you will need to order part number EBZ37171903. If this is not correct, please doublecheck your model number and re-post as the model you listed did not come up as a valid model number. I apologize for this and as always, we appreciate your patience and understanding in this matter. Read More...
Jeff M September 23, 2014 for Model Number LRG30355ST Hello, I need to convert my LG oven from LP to Nat. gas. Is there a conversion kit available to do this? Thanks
1 Answer Jeff, There is not a kit to go from LP to natural but in order to do this you will need one of each of the following part: EBZ37186402EBZ37186403EBZ37186404EBZ37186405EBZ37186401. Read More...
Taylor December 21, 2013 for Model Number LG 3036ST I have a LG gas range LDG3036ST that I need to convert to propane. Can you tell me if you have the kit?