Skip to Content

2 Day Quick Delivery!
365 Day Return Policy!
15 million satisfied customers
Over 2.1 Million Parts In Stock
Free Tech Support!
Google Trusted Store

Customer Questions and Answers for Front Leveling Foot by Whirlpool

Best Seller

Manufacturer Part

Front Leveling Foot

4.89 (64)

By: Whirlpool

Part Number: OEM18044109

Manufacturer Part Number: WPW10001130

The Front Leveling Foot is an OEM part for Whirlpool washing machines. It is designed to support and stabilize the washer by allowing users to adjust the height and level the appliance on uneven floors. Proper leveling ensures smooth operation and minimizes vibrations and noise during wash cycles.

Causes of a bad Front Leveling Foot can include physical damage from excessive force, wear and tear from frequent adjustments, or corrosion due to exposure to water or laundry chemicals. Over time, these factors can compromise the foot’s ability to maintain stability, leading to operational issues.

Symptoms of a bad Front Leveling Foot include:

The washing machine rocking or wobbling during operation
Increased vibration and noise
The washer being unlevel, affecting wash performance
Difficulty in adjusting the foot

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

More

$6.41

Compare At:: $7.63
You Save:: $1.22

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Questions & Answers

For Whirlpool Front Leveling Foot (Part Number: OEM18044109)

Rich June 30, 2016 for Model Number Whirlpool WFW9250WW00

I want to remove a pedestal and install the leveling feet that I purchased . How do you install the leveling feet ?

1 Answer

Rich, The leveling legs will just screw into the base of the unit. You tilt the unit and screw in the leg with nut and then once you have it level where you want it then you tighten the nut in order to lock it in place.

Read More...

Lisa Nova November 07, 2015

Can you tell me if the thread on this foot is (Metric) M8 x 1.25mm???

1 Answer

Lisa, The leveling leg is 3/8-16x55.5 in size. This is the only information that we have on it.

Read More...

Dave C July 26, 2014 for Model Number MED6000AW0

I bought a floor model at a major home repair store but there are no leveling feet. Easy to get at a local appliance repair store?

1 Answer

Dave, the leveling foot listed for the given model is part number 49621. For an extended leveling foot you can use part number 49621. Thanks.

Read More...

W May 07, 2014 for Model Number kenmore washer model 11029522800

Dose anyone happen to know what the leveling feet bolt size for a Kenmore washer model 11029522800 is. Because i would like to replace them with wheels. Thanks

1 Answer

W, You really don't want to do that, install wheels on the base of the washer. The movement and vibration from the moving parts and tub are transmitted into the frame, from the frame to the feet, and from the feet to the floor, so the washer would have a tendency to "walk" and vibrate. Besides the rear feet are part of a self leveling, self locking mechanism, and you'd have to modify the assembly to install wheels instead of feet. You may want to rethink this idea.

Read More...

David January 11, 2014 for Model Number Kenmore Washer 11047532602

We'd like to remove the pedestal from under our Kenmore HE2 Plus Washer (11047532602). I haven't looked yet, but I'm anticipating that the washer's original feet may have been removed and discarded by the previous home owner when the washer was installed. Can you say if this is likely, and, if so, what feet we need to order to have ready in order to remove the pedestal? Thanks. David Frederick, MD

1 Answer

David, Most likely the leveling legs were removed and the parts that would be needed are the leveling legs WPW10001130 and the nut WP3359452. You will need a total of 4 of each of these.

Read More...

Tom December 22, 2013 for Model Number wfw8300sw00 & wed8300sw0

I'm looking for the front levelling legs and the rear self-levelling legs for both wfw8300sw00 and wed8300sw0. We are removing the pedestals from both and need the leg sets. Thank you.

1 Answer

Tom, This unit would only have leveling legs and not self leveling for the rear. The leveling legs for the washer are part number WPW10001130 and will need 4 of these and 4 locking nuts part number WP3359452. For the dryer you will need 4 of part number 49621.

Read More...

Mary December 14, 2012 for Model Number WTW57ESVH1

My husband installed our washer two years ago and I guess didn't put leveling feet on the front, It was level and we had no problems but when we moved it to move in a freezer it made the back to front not level. Can't find the feet that were suppose to come with it. It has leveling feet in the back. I have ordered two front feet from here and it said that they were compatible. Should that work? (Was making a noise after move --that's why we checked it

1 Answer

Hello Mary. The back legs are self leveling. You will pull the top control panel toward you lifting the back legs off the floor, and then set it down. Do this 3 times to level the unit. WPW10001130 is the front feet.

Read More...

Linda August 20, 2012 for Model Number 110 2675203

The washer does not have feet for leveling in the back of the machine. The machine is tilting to the right back and shakes very bad when spinning.

1 Answer

Linda, There should be two(2) self levelling, self locking feet 285244. You'll need to lay the washer on its side or front, and check to see if the feet, are missing, and or if the locking mechanism/base is damaged. Thanks

Read More...

John P. June 02, 2012 for Model Number 110.22422100

Does Whirlpool W10001130 Leveling Feet come as a set of two, or four feet. Or is the item listing for a single unit?

1 Answer

Hello John. WPW10001130 is 1 leveling foot.

Read More...

Roger May 02, 2012

What is the bolt size on part #ap3892282 ?

1 Answer

Hi Roger. The manufacturer only list this as a part # WPW10001130. They do not give us this information. Thank You.

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278

Need Help? Chat with a Pro

Or ask a question by filling in the form

Share your thoughts with other customers

Over 2.1 Million Parts In Stock
2 Day Quick Delivery!
365 Day Return Policy!
Free Tech Support!
Google Trusted Store