Jc Viteri July 26, 2017 for Model Number DU1055XTVS2 My dishwasher stoped working and the normal cycle light flashes, sometimes the Cancel/drain will be the only thing that works. Already replaced the board did a successfull diagnostics but after one day of working it is back to the normal cycle light flashing. Is this a panel problem?
1 Answer JC, Yes the problem is in the keypad circuits on the control panel WPW10459139 / W10298385 Black/Console Assembly (Includes Active Overlay & Insert). "PROBLEM: Won’t Run and LED Above Key(s) is Flashing Rapidly - Short circuit(s) in keypad or in control’s input lines that read the keys." Replacing the control panel / keypad assembly should solve the issue. Read More...
Tommy D December 12, 2015 for Model Number DU1055XTVB0 My pots & pans light is blinking on my dish washer (model# DU1055XTVB0). I believe a need a new control panel. Which would you recommend for my dishwasher? thanks!
Tim November 23, 2015 for Model Number DU1055XTSS3 This operates only on the "light" cycle. The other buttons for the other cycles do not come on. Do I need a new touch pad control panel, a new front panel or both?
1 Answer Hello Tim. It sounds like the control panel is bad and will need to be replaced on the unit. Read More...
Maria J June 03, 2015 for Model Number DU1100XTPS7 Hi, I am replacing the key pad W10459139. It is because the lights flash all time and the machine does not start. Also, I noticed that the handle is loose and don't close properly. If I replace the key pad; is the handle integrated?
1 Answer Hello Maria. No, those are separate parts. You will need to order WP8534984 for the handle. Read More...
Phillip February 24, 2015 for Model Number DU1055XTVS2 No response from the start button. The other buttons work but not the start button, thanks
1 Answer Hello Phillip. If the door switches are good, you will need to order and replace the control panel on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Rick October 25, 2014 for Model Number DU1055XTVB3 My wife opened the dishwasher door while it was running & everything went T-up. I had the 'Normal & Cancel' lights flashing & nothing would work. I cut the power then tested & replaced the pump. I now have the 'Normal' light flashing. If I push the 'Cancel' button it will start flashing also. I've tried the 'Normal - Heated dry' routine & nothing happens. I'm at a loss as what part needs replaced. My system is black if its the control ass. I can't afford to replace the control ass. & the control board at the same time. Please help.
1 Answer Rick, When a indicator light is flashing then the issue will be with the control panel of the unit having a stuck keypad. The console part number for your unit is WPW10459139. Read More...
Charlie July 21, 2014 for Model Number DU1055XTVS3 I think there is a problem with my control panel and want to run the test to see if it's not the keyboard but I can't figure out how to remove the keyboard ribbon, I also can't see how to remove the board from the plastic case it sits on...just don't want to break anything, please help. Thanks
1 Answer Charlie, On the connector that the ribbon harness goes into, you would just pull straight out on the connector. For the control board there will be a clip on the same side under where the ribbon harness in that you will need to release and lift that side up and then pull out. Read More...
Pamela June 11, 2014 for Model Number DU1100XTPBA The pots and Pans light on my QuietPartner II is flashing. No other keys will work, If I press the cancel/drain button, then the normal button also starts flashing. I purchased the control board from you when an appliance repair person suggested it. It was part number W10084142. I installed the new board and I still have the same issue. I have checked the supply lines, the drain and the screen in the bottom of the dishwasher. Any idea on what to do next? The dishwasher is black if that makes a difference in any part that you might suggest I try next. Thanks in advance for your help.
1 Answer Hello Pamela. You will need to order and replace the control panel WPW10459139 on the unit. Read More...
Ronald W. October 22, 2013 for Model Number du1055xtvs2 Does the console asm. include door switches, electonic control board, and wire ribbon?
1 Answer Ronald, the black console WPW10459139 includes the ribbon cable however, it does not include the door switch WP8269209 or electronic control WPW10285180. Thanks! Read More...
Jolie October 18, 2013 for Model Number Whirlpool DU1100XTPS9 dishwasher History: Recently I noticed that all the screws were loose on on the inside of the dishwasher door, but the dishwasher still worked. Currently the start button will not respond when I try to start the dishwasher cycle (the lights go on, but the cycle won't start). I noticed a post that suggested "press heated dry, normal, heated dry, normal, heated dry, normal. The unit should start running, do not stop it, let it complete." I did this, (although I'm not sure what that does... resets something?) I let it complete it's cycle, however the unit still does not respond to start a normal wash cycle. Any suggestions?
1 Answer Hello Jolie. It sounds like the console is bad and will need to be replaced on the unit. Read More...