Wendy June 02, 2022 for Model Number 665.12762k310 The top rack on my dishwasher broke and dropped to the bottom rack. I'm not sure which part I need. Can you help?
1 Answer Wendy, the upper dishrack can be caused by a failed wheel on the rack adjusters W10712394, a damaged rack W10727422, or even a damaged rail WPW10195623. Inspecting these parts would be necessary to identify which one would be needed. Read More...
Johnny November 11, 2019 for Model Number WDT780SAEM2 On my stops, I cannot find the clips to push. There is a tab on front of the stop that looks like it would flip open . I inserted a small screwdriver under it but it won't budge??
1 Answer Johnny, the front stops will have a tab in the center that would need to be pushed in. While it is pushed in, the stop would be pulled towards the middle of the dishwasher. The video found at https://www.appliancepartspros.com/whirlpool-stop-track-removable-wpw10508950-ap6022472.html#autoplay can be used to assist with this. Read More...
Roxane July 22, 2016 for Model Number F12701407 Will this fit my model number? I ordered 2 from another company and they fell off during the wash cycle and won't stay on too large.
1 Answer Hello Roxane. The model number will have to be verified on the units I.D. tag since the one listed came up invalid. This will be necessary to look up and specific parts such as the one you requested. Thank you for your patience and understanding in this matter. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
John March 02, 2013 for Model Number Kenmore 665-17059400 part No. 8561996 and 8562015 How to remove track stop (part no. 8562015) and replace 6561996? Thanks
1 Answer John, You would push inward toward the middle of tub on the tab and this should release the tab to take off. Read More...
Carolyn February 15, 2013 for Model Number du943pwkt0 How do you remove the stop? Please send instructions.
1 Answer Hello Carolyn, Depress the little clip and slide the entire stop up and out of the end of the track. Read More...
Charles October 02, 2011 for Model Number 8562015 I was wondering if I need 2 of these? They are the stops for the rack on a dishwasher. Also for part number 8565925 do I need 2 of those as well? Thanks.
1 Answer Hello Charles! Yes, you will need two of the rack stops WP8565925, one for each side rail. These are applied to the front of the rail. You will also need two of the rack stops WP8565925, one for each side rail. These are applied to the back of the rail. Thanks! Read More...
Paul August 06, 2011 for Model Number Whirlpool Gold GU2300XTLB0 How do you get the guide stops off the upper basker to take it our?
1 Answer Paul, You'll need a small flatblade screw driver, to save your fingers. Rool the upper rack track out, then roll the rack,as far back as possible. With the screwdriver press in on the upper retainer clip, on the stop inside the track, and push up on the stop itself using your thumb. Good Luck. Read More...