Sharon D. October 20, 2017 for Model Number ET1MHKXMB08 Looking for a new freezer rack. Mine has completely rusted under the ice bin.
1 Answer Hello Sharon, I'm sorry but this part 2189454 has been discontinued by the manufacturer and no satisfactory substitutions have been provided. Thank you for your patience and understanding in this matter. Read More...
Peter November 27, 2015 for Model Number Kitchen aid ksrs27qdwh02 I'm looking for shelf supports for the refrigerator side. Is this the right part number?
1 Answer Hello Peter, Your model actually calls for 4388539 and 4388538. It looks like the kit W11581579 you were viewing has the correct parts in it, we cannot guarantee it since it does not come up under this model number. Read More...
Ash October 20, 2015 for Model Number Sears Model # 106.9535510 I have a Sears refrigerator, Model#106.9535510. The support studs for the Crisper have broken off both in the front and back. Are they the same? Do you have the parts to make this repair? Please give me your part # for this Sears refrigerator.
1 Answer Ash, There is a crisper stud kit that will work for your unit. The part number for the kit is 4388538 Read More...
Earl C. November 28, 2014 for Model Number 106.9555711 Can I just purchase the wall bracket that slides down on the part that fits on the right side of freezer? I do not need the whole kit #4388540, only two of the slide parts that hold the shelf. These would be for the old models. Thank you
1 Answer Hello Earl, I'm sorry but since the manufacturer has made these part numbers cross to the kit W11581579, the kit is the only way to get any of these parts. Read More...
Amy August 05, 2014 for Model Number JCD2389GES The shelf support broke off -- so it's not missing, but rather the part that extends into the fridge is gone, but the part that fits into the whole inside is still there. How do I get out the broken part that's stuck inside so I can replace with a new shelf support??? Thanks!
1 Answer Amy, The crisper supports at the front are screwed into place and are part number WP61005337. Read More...
Ann March 11, 2012 for Model Number ED20ZKXBWOO I have a ED20ZKXBWOO model refrigerator/freezer, and one of the freezer shelf brackets has broken off. It is on the right side of the freezer compartment, about halfway up. The white plastic "slider" that slides over this bracket is intact, I just need the actual piece that somehow attaches to the wall of the freezer and holds the weight of the shelf. All I can see is what looks like a broken-off screw-head, or rusty nailhead, protruding about an eight of an inch from the wall. A piece of white plastic appears to have broken off from that. How do we get the old piece out without damaging the hole for the new piece? And what exactly is the new piece that goes in there? I assume it is one of the pieces from Part No. AP3109341, but I can't tell from the broken unit what the intact bracket looked like before it broke. Thank you!
1 Answer Hi Ann. When you get the Support kit part # W11581579 and remove the old parts, you will be able to see which parts compare to your parts. Thank You. Read More...
Jacqueline F February 16, 2012 for Model Number ED25PQXDN03 I need a new support for the right front crisper shelf as the old one broke. How do I remove it?
1 Answer Jacqueline, If there is no screw holding the stud to the wall, then it is a "twist " fit. You may need a pair of pliers, to grip the remainder of the stud and turn it 90 dgrs. and remove it. Thanks and Good Luck Read More...
Donna T December 11, 2011 for Model Number Kenmore coldspot model # 106.955571.1 Will this kit work with my model, if so I only need the shelf studs are they sold seperately ?
1 Answer Donna, 4388538 is the part number supplied by the manufacturer for a shelf stud repair kit, for the model number you supplied. You'll need one kit per loose or broken stud. The W11581579 will have extra parts you may not need and has two shelf studs, depending on which style is used in your unit. Good Luck and Thanks Read More...
Tony S. October 08, 2011 for Model Number ED22TQXGWOO I had a stud support break that holds the top right-hand crisper,How do I take it off to replace? Thank you in advance.
1 Answer Hello Tony. Some of the supports W11581579 lift off and the round ones twist out of the side wall. Hope this helps. Read More...
Ginger September 17, 2011 for Model Number ED25TQXFW01 I have an ed25tqxfw01 and I need 2 wire shelves for my freezer. 1 large and 1 small. Also I need the resting parts for the wires to sit on to hold the shelf in place. It looks like it would be a part that would slide into the bracket attached to the freezer wall in order to hold the shelf up. Are these the right parts for that? I don't think this would be the amount that I would need. Any help would be appreciated.
1 Answer Hello Ginger! Your freezer uses one wire shelf part number WP2174267 and two wire shelves part number WP2174268. You will need the shelf support kit W11581579 to install these shelves if missing. Thanks. Read More...