Johnny-Jc April 01, 2015 for Model Number MBF2255KEW The fill tube freezes up solid, stops making ice, then starts to leak water from the water line where it connects to the fill tube. Does not appear to leak from the water valve.
1 Answer Johnny-JC, The issue with the fill tube freezing up would be a water valve that is seeping and would need to be replaced. The part number for the valve is WP67003753. Read More...
Phil March 06, 2015 for Model Number MBF2255KEW There was a flex line not tubing running from water shut off under sink to water valve to ice maker. I put a in-line filter between water valve and ice maker there was a 1/4" tubing going up back of frig. Does it make a difference if it went there? Its still making ice cubes
1 Answer Phil, It does not make any difference that you put the inline filter on the water line between the valve and icemaker. Read More...
Phil March 05, 2015 for Model Number MBF2255KEW I have water dripping into the ice maker tray don't know if the problem is the water valve or ice maker?????????????. Don't want to buy one thing and its the other. Thank you RSVP
1 Answer Hello Phil. If water is dripping out of the fill tube, you will need to replace the water valve on the unit. Read More...
John G. March 04, 2015 for Model Number whirlpool #GX5SHDXTQ00 Water gets into ice cube bin freezing groups of cubes together. The new water valve I installed did not solve the problem. Help!
1 Answer John, Basically, you have a factory installed "add on" ice maker. Since you've replaced the fill valve, you'll need to check the water supply line to the refrigerator, for kinks, twists, etc. Also check for a dirty "in line" water filter, and if you have a self piercing water shut off valve, check to make sure the piercing pin isn't bent or clogged with sediment from the water line. You need a minimum of 20 PSI constant water pressure at the fill valve connection for the valve to operate properly. Low water pressure will make the fill valve drip and cause the cubes to freeze together. Read More...
Dave T. August 05, 2014 for Model Number ABR1922FES Hello, I have two issues with my ice maker. First issue has been happening for a year now. 50% of the time a cube hangs up and won't drop into the tray. Won't make anymore ice until I dislodge the cube. Second issue recently started. It only produces 3 or 4 cubes at a time now and water also drips into the tray and forms an ice block. What could the problems be and which parts do I need to replace. I just bought washer and dryer parts from you and the repairs went beautifully. Thanks in advance.
1 Answer Hello Dave. It sounds like the icemaker is not getting enough water. This can cause both issues. You will need to order and replace the water valve on the unit. Read More...
Ruth July 17, 2014 Just replaced the ice maker and the water valve. Ice maker is still not making ice. What to do next?
1 Answer Hello Ruth. Make sure the temp is between 0 and 5°. If so, you will need to look for a clogged fill tube for the icemaker. Read More...
Bob S April 09, 2014 for Model Number Roper Model #RS25AGXNQ00 The ice maker fill tube and fill funnel/cup keep freezing the water as it travels into icemaker, causing water to drip out of ice dispenser on the door. Would not having the ice cube stripper arm in place cause this, or is it the water valve? The water valve does not appear to be leaking. It only allows water to flow when the Ice Maker calls for water. Then the water shuts off immediately. Only after the Ice maker is making ice for at least 4 days does the problem seem to appear. At one point in time, we had added some store bought cube ice to dispenser tray to use up extra store bought ice we had purchased for a BBQ. At that point in time, the store bought ice froze to the stripper arm, while trying to remove ice, broke stripper arm, and removed arm. If I replace stripper arm, will it take care of problem? Please respond ASAP, as I plan on purchasing/fixing whatever needs to be done TODAY. Thank you, very much.
1 Answer Hello Bob. It sounds like the issue is the water valve in the unit. It sounds like it is not closing all the way at times. Read More...
David July 01, 2013 for Model Number ABB1921DEQ My father's furnace went out and his line to the refrigerator froze. How can I be sure it is the valve that needs to be replaced before I order parts? Thanks. -David
1 Answer Hello David. If the valve froze and busted, you should be able to see it leaking on the unit. Read More...
Rosie May 09, 2013 for Model Number ARB8057CW The water drips from the water selection all the time. To stop the dripping I have had to take the filter out and stop the water source - is this the water valve causing this and do I need to replace just the water valve to correct the water dripping when I am not filling a glass of water?
1 Answer Hello Rosie. Based on the information you provided, it sounds like the water valve is bad and will need to be replaced on the unit. Read More...
Gene April 17, 2013 for Model Number ABB2524DES I have water dripping into the ice cube tray and freezing all my cubes together. What part do I need to fix or replace? Thanks
1 Answer Hello Gene. If the water is leaking from the water valve, you will need to order and replace the valve on the unit. Read More...