Trimmer Plus Parts

Flange lock nut secures components on mowers and outdoor power equipment. Replace if stripped, corroded, or missing to restore proper fastening.

A carriage bolt is a type of fastener. It features a smooth rounded head and a square domed top. It has threading, which leads to up to the square shoulder. The purpose of its square is to prevent the bolt from spinning. Once the carriage bolt is inserted through the hole, using a nut and washer can provide additional security. Carriage bolts can corrode and loosen over time. Since it doesn't have a slotted head, a socket wrench is needed when replacing. This bolt carriage replacement is compatible with wood chippers, tillers, string trimmers, lawnmowers, and edgers. It is a genuine MTD product that measures 5/16x.075. It has a smooth rounded head and square shoulder underneath it. This carriage bolt is sold individually.

Secures the spool to your trimmer head and releases line when tapped. Replace if cracked, broken, worn, or won't hold the spool properly anymore.

Hex screw fastener for securing lawn mower components. Replace if stripped, rusted, or missing to ensure proper assembly and equipment stability.

This OEM sprocket assembly contains a sprocket, which is a circular gear with teeth that engage with the links on a chain to move the chain forward.A new sprocket assembly will be needed if the part is broken in any way or if the sprocket teeth are worn off. If it's not immediately obvious to the eye, a test can be performed to determine if a new sprocket assembly is needed. Simply move the chain and if at any point the chain becomes stuck, this means a new sprocket assembly is needed. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This is a genuine MTD part sourced directly from the manufacturer and is sold individually. The sprocket assembly is compatible with trimmers manufactured by either Troy-Bilt or Cub Cadet.

There are multiple uses for the 5/16-18 Hex Screw. It is often used with small gasoline-powered yard equipment such as lawn and garden machines. While hex screws such as these may be used in edgers and snowblowers, the most frequent use this screw is in yard tractors. This variety of screw is commonly used in attaching the various appendages of gas-powered equipment to a central operating platform. In particular, these hex screws are used to secure the engine block of power tools to the frame or housing of the equipment. Once in place, these fasteners have an almost unbreakable strength to them. This is so much so the case that often, in order to detach the engine manifold and repair the inner workings of an engine, the bolts must be chiseled or cut loose. In such cases, it is necessary for the bolts to be replaced during reassembly. Manufacturers insist that genuine OEM replacement parts be used in the rebuilding process. These replacement parts were manufactured to the same exacting specifications used to make the original screws. These OEM screws are compatible with equipment made and sold by Yard-Man, Cub Cadet, Troy-Bilt, Husky, MTD, Bolens, and Yard Machines.

Lower flexible drive shaft for line trimmer attachments. Mounts inside the lower boom housing to drive the trimmer head. Replace when worn round or cracked.

Inner spool reel for line trimmers. Holds and winds trimmer string inside the trimmer head. Replace if cracked, broken, or worn from use.

Red plastic wing knob that secures the lever handle to the mower base. Replace if cracked, broken, or missing to properly hold components together.

Trimmer head reel for gas line trimmers. Spools and houses cutting line. Replace if cracked, broken, or worn. Slides into housing for easy installation.

Fixes grinding noise from lower unit during operation. This gear box assembly powers and drives the tiller tines. Moderately difficult repair.

This part is a drive shaft housing assembly that is used on hedge trimmers. The drive shaft housing assembly is a link that connects the gearbox with the power base shaft. This particular drive shaft housing assembly is used with hedge trimming accessories.A new drive shaft housing assembly may be needed if the operator notices that the hedge trimmer is vibrating excessively during use. Upon a quick visual inspection, if the drive shaft assembly is cracked, broken, or damaged in any way, then it will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This part is a genuine MTD part. It is sold individually. This particular drive shaft housing assembly is compatible with hedge trimmers that are manufactured by MTD, Craftsman, Trimmer Plus, ClickLink, Troy-Bilt, and Cub Cadet.

This is a genuine replacement screw designed for use in select MTD engines on lawn and garden equipment. Specifically, this is an anti-rotation screw, which is used to stop the drive shaft housing from turning inside of the main housing assembly. This screw is a small part that is subject to constant vibrations, pressure, and high temperatures. It can sometimes become worn or damaged as a result or even break off entirely, which would mean that the inner housing would no longer be held in place accordingly. If this screw is damaged or lost, it needs to be replaced with a genuine OEM replacement as soon as possible. This MTD anti-rotation screw is manufactured with high-quality materials and designed for use in select trimmers from MTD, RYOBI, Yard-Man, Troy-Bilt, Murray, Cub Cadet, Yard Machines, and Bolens. This replacement will require a screwdriver. Simply remove the damaged screw, if it is not already missing, from the clutch cover assembly, and then install the new screw. It should only take a few minutes to perform the replacement. Be sure to wear gloves to protect the hands. This screw is sold individually and does not include any additional parts or hardware.

If your trimmer won't release cutting line when bumped, the spool spring may be stretched or broken. This essential bump head component is easy to replace.

Mounting screw for line trimmers and hedge trimmers. Secures components to the housing or engine assembly. Replace if stripped, missing, or damaged.

Nylon nut for lawn equipment. Secures and connects components throughout the machine. Replace if cracked, stripped, or missing for proper assembly.