Whirlpool 74003645 Oven Inner Door Glass OEM Part

DIY. The delivery to Milwaukee took two days. The project was very easy and took about 1hr. The only tools required were a screw driver (electric) and a pliers. Just make sure your irganized with the screws so you don't lose any or mix up which ones go back in which holes. There's about 20 total screws. This $50 part saved me from having to buy my wife a $1000+ oven.

My experience with Appliance Parts Pro was unbelievable. I feel like the glass was at my front door before I even finished placing my order. The repair was not difficult, and the steps are listed below. 1. Remove oven door by lifting it off the hinges. 2. Remove all screws around the oven door. 3. Remove front glass. 4. Remove 4 screws securing the next glass piece to the door, and remove the glass. 5. Remove screws securing the handle to the door, and remove the handle. 6. Remove screws securing the metal piece to the door and remove the metal piece carefully so the insulation stays in place in the door. 7. Carefully lift the frame holding the two inner glass pieces to remove it from the door. 8. Bend the tab back that hold the frame together and remove the glass from the frame. 9. Clean and replace all parts as needed, and follow all steps in reverse order to reinstall.

First, i suggest as you disassemble you take pictures with your phone...although it would seem simple enough there are more pieces than you might think (3 la yers of glass plus the outer glass facade)...the process is abit tedious but not terribly complicated...i didn't take pictures along the way of disassembly but this would have helped...along the way I super cleaned all parts so this took awhile...oh, make sure you have a large flat area for your work...i used two towels for a cushion..

With the new piece of glass, I took the door apart and replaced the glass. It was considerably different from the video on the Appliance Parts Pros site, but I figured out how everything had to go. The biggest difference was that it needed to be face up on the table to lift off the glass, not face down. Just take out all the screws, pull the stainless steel+glass outer layer down, and it opens up--- you then have more screws to remove, but it's pretty straightforward.

I ordered the replacement part from AppliancePartsPros.com. The part shipped immediately, arrived sooner than expected and was easily installed. I avoided an expensive repair by doing it myself and I am not very handy with repair work.