Parts for Ge RVM1535DM1BB: 01 - Microwave Parts

Complete microwave door assembly that replaces a damaged, cracked, or broken door. Installs on the front of your microwave to restore proper closure.

Fix unresponsive buttons or a blank display with this microwave control panel assembly. Moderately difficult repair requiring careful disassembly.

Glass light cover for microwave cooktop lights. Shields and diffuses bulb from heat, grease, and splatter. Replace if cracked, broken, or missing.

Clear glass lens cover for over-the-range microwave cooktop light. Shields bulb from grease and splatters. Replace if cracked, broken, or missing.

Replacement glass lens cover for microwave interior or cooktop lights. Protects bulb from food splatters. Needed when cracked, broken, or shattered.

Holds the light bulb securely in your microwave for proper interior illumination. Replace if bulb won't stay in place, socket is burned or cracked.

Illuminates your microwave interior for monitoring food during cooking. Replace when bulb burns out or dims. Verify fit with your model number before ordering.

The Air Filter is an OEM part for GE microwaves. This component is essential for trapping grease, smoke, and odors during cooking, maintaining a clean and safe kitchen environment. It is typically located above the cooking surface or within the microwave's ventilation system. The filter measures approximately 6.5 inches deep by 13.5 inches wide

Causes of a bad air filter can include clogging from grease and food particles, physical damage, or general wear over time. A compromised air filter can reduce the efficiency of the microwave's ventilation, leading to poor air quality and potential buildup of contaminants.

Symptoms of a bad air filter include:

• Reduced ventilation efficiency
• Increased smoke or odors during cooking
• Visible grease buildup on the filter
• The filter appearing damaged or excessively dirty

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Microwave shuts down during use? This thermal cutoff thermostat prevents overheating by interrupting power when temperatures exceed safe limits.

This latch body is the door latch component that secures the appliance door during operation, restoring reliable closure so cycles can run normally. Use it to replace a worn or damaged latch that won't hold the door closed. What it does:

• Engages the door striker to hold the door closed and maintain a proper seal during operation
• Works with the door latch mechanism so the appliance can complete cycles that require a closed door
• Common symptom: door won't stay closed, is difficult to latch, or feels loose at the latch point
• Replacing a damaged latch body can prevent intermittent door-open errors and restore normal door operation

• Disconnect power (unplug or turn off circuit breaker) before starting any repair
• Remove the door or access panel as needed; keep track of fasteners and any trim pieces
• Handle door glass and trim carefully to avoid damage; test latch engagement before full reassembly

The Lower Lever Switch is an OEM replacement part for GE microwaves. This component activates the door interlock switch when the microwave door is closed. It ensures that the microwave only operates when the door is securely closed, preventing any operational hazards.

Symptoms of a bad Lower Lever Switch include:

• The microwave not starting, indicating the door isn't recognized as closed
• The appliance operating with the door open, a clear safety hazard
• Unusual sounds or issues when attempting to start the microwave
• The need to apply extra pressure to keep the door closed

Common causes for a malfunctioning Lower Lever Switch can be attributed to mechanical wear from frequent use, damage incurred during cleaning or use, or internal issues affecting the switch’s activation mechanism.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Microwave Door Switch is an OEM part for GE microwaves, designed to prevent the microwave from operating when the door is open by interrupting the power whenever the door is not securely closed. The door switch is an essential safety feature.

Symptoms of a failing Microwave Door Switch include:

• The microwave not starting or heating
• Running when the door is opened
• Unusual noises when the door is closed  

Causes of a bad Microwave Door Switch can result from repeated opening and closing of the door or slamming that can cause the switch to degrade or become misaligned, leading to intermittent or failure.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Monitor Switch is an OEM replacement part for GE microwave ovens. Located internally on the turntable control circuit board, this switch monitors rotation of the turntable during cooking cycles.  

Causes of failure involve degradation of the electrical contacts from continuous arcing loads over years of use combined with vibration stresses.

Symptoms of a faulty monitor switch include:

• The turntable no longer rotates or spinning intermittently
• Cooking cycles aborting prematurely with error messages 
• Screeching or grinding noises emanating from beneath cavity
• Visible burnt spots on turntable drive assembly

This genuine GE switch is also compatible with select Hotpoint and RCA models.

The Fuse is an OEM part for GE microwaves. It serves as a safety device designed to protect the microwave from excessive current that can cause overheating and potential fire hazards. When the current flowing through the microwave circuit exceeds a certain level, the fuse blows or breaks, cutting off the power to prevent damage or fire.

Common causes for a fuse to blow include power surges, faulty wiring within the appliance, or the use of microwave inappropriate containers that cause sparks. It is essential to address these issues not only to replace the fuse but also to correct the underlying problems to prevent future failures.

Symptoms of a bad fuse include:

• The microwave suddenly stops working.
• No signs of power or response even when the microwave door is closed and the start button is pressed.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replacement door handle for microwave ovens. Installs on the exterior door panel. Needed when original handle is broken, cracked, or snapped off.

The Microwave Door Handle is an OEM part for GE microwaves. It allows you to easily open and close the microwave door, providing a secure grip for safe and convenient access to the appliance's interior. Please note the screws are not included with this handle.

Common causes of a bad door handle include frequent use, accidental impacts, or wear and tear over time. A faulty door handle can make it difficult to open or close the microwave door, impacting the overall functionality of the appliance.

Symptoms of a bad microwave door handle include:

• The handle is loose or wobbly
• Cracks or breaks in the handle
• Difficulty opening or closing the microwave door
• The handle coming off completely

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This main electronic control board assembly manages the refrigerator's core functions so the unit responds correctly to user inputs and cycles components for cooling and defrost. Replacing a failed board restores normal control and operation. What it does:

• Manages compressor, fans and defrost cycles by sending signals to subsystem components
• Interprets front-panel inputs and adjusts settings and modes
• Controls display/status indicators and error reporting for diagnostics
• Helps regulate cooling behavior when functioning correctly
• Commonly linked to symptoms like unresponsive controls, incorrect temperatures, or erratic cycles

• One main control board assembly

• Disconnect power to the appliance before starting to avoid shock or damage
• Handle the board by edges and avoid static discharge; use proper ESD precautions
• Verify connectors are fully seated and routed as originally installed; photograph wiring before disassembly
• After installation, restore power and confirm proper operation of controls, display and cooling functions

Base plate assembly for microwaves. Mounts to the bottom of the cabinet to provide structural support. Replace if cracked, warped, or damaged.

Microwave not heating but lights and timer work? The high voltage diode converts AC to DC for the magnetron. DIY repair in 1-2 hours with basic tools.

This run capacitor helps the appliance motor start and run smoothly by storing and releasing electrical energy. Replacing a worn capacitor can restore reliable motor operation and reduce abnormal motor noise or cycling. What it does:

• Provides the brief power boost motors need to start and maintain RPM
• Helps stabilize motor voltage and improve run efficiency under load
• Commonly linked to symptoms such as motors that hum but won't start, slow or intermittent motor operation, or unusual motor noise
• Reduces stress on motor windings that can lead to premature failure when functioning properly

• One motor capacitor

• Always disconnect power at the breaker or unplug the appliance before servicing
• Capacitors can hold a charge; discharge safely
• Observe proper polarity and mounting location during installation; secure wiring and connectors

If your microwave fan won't run or makes noise, this ventilation motor restores proper airflow. Direct replacement part for common over-range models.

Secures microwave to wall cabinet mounting bracket. Replace if cracked, stripped, or missing to restore proper cabinet installation and stability.

Controls exhaust airflow in over-the-range microwaves. Replaces bent, damaged, or missing damper assemblies for proper external venting installation.

Controls exhaust airflow in over-the-range microwaves. Replaces bent, damaged, or missing damper assemblies for proper external venting installation.

Controls exhaust airflow in over-the-range microwaves. Replaces bent, damaged, or missing damper assemblies for proper external venting installation.

Replace your microwave's power cord assembly if damaged, frayed, or missing. Connects the unit to your wall outlet for safe electrical operation.

Replace your cracked, broken, or missing microwave glass cooking tray. This rotating turntable supports food for even heating in your microwave cavity.

Hardware assembly kit for microwaves. Includes screws, nuts, and washers for securing internal components. Replace missing or stripped hardware pieces.

Flat bolt fastener for securing microwave to cabinets or wall brackets. Replace missing, stripped, or corroded mounting hardware to restore secure installation.

Direct replacement noise filter assembly for microwaves. Reduces electrical interference. Replace if cracked, damaged, or missing to restore clean power.

This front cover protects the range/oven control area and restores the appliance's finished appearance. It keeps wiring and controls enclosed while preventing debris and splashes from reaching internal parts. What it does:

• Replaces a cracked, warped, or missing front cover that exposes control components
• Shields control board and wiring from spills, grease, and accidental contact
• Restores the appliance's cosmetically finished front for a clean look
• Helps prevent sharp edges and loose trim that can catch clothing or cause injury

• One front cover

• Disconnect power (unplug or flip breaker) before servicing to avoid shock
• Access may require removing adjacent panels or control console screws; handle trim gently to avoid breaking tabs
• Use appropriate tools and keep fasteners organized for reassembly

Wire harness assembly for microwave ovens. Connects internal electrical components. Replace if wires are frayed, damaged, or connections are loose.

Removes cooking odors in recirculating microwave vents. Replace when odors persist or airflow weakens. Confirm fit with your model number.