Attachment

This part is a replacement bracket catch support. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current bracket catch support is defective or broken, this part can be used as a replacement. It is intended for use with a variety of lawn tractor models.The bracket catch support is critical for holding components of the equipment securely in place and should be replaced if defective in any way. This includes being bent, dented, detached, or otherwise rendered ineffective. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this bracket catch support, the appropriate owner's manual and equipment diagrams should be referred to. This bracket catch support is suitable for use on a variety of lawn tractor models manufactured by MTD, Craftsman, and other brands. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

Catcher bracket for lawn mower attachments. Mounts to support grass collection systems. Replace if bent, cracked, or broken to restore proper fit.

This replacement part is a cross support bracket. This is a genuine replacement part made by MTD. This cross support bracket is used in situations where parts of lawn mowers need extra support in order for the machine or appliance to run properly or smoothly. A new cross support bracket might be needed if the current part is missing or damaged in any way. This can include being dented, bent, or cracked. This can be from normal wear and tear over years of use or from an isolated incident. Be sure to refer to the proper user manual for more information on how to replace this part. This cross support bracket is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This is a Yard-Man drive mounting bracket compatible with snow throwers. Mounting brackets serve to hold objects to various surfaces, and must be durable. Through everyday wear and tear and exposure to the elements, they will eventually need to be replaced, but this one is built to last a long time.To mount a snow thrower onto a lawn tractor, first take off the front shell of the tractor. Next, install the mounting bracket on each side of the front of the tractor as well as one in the front. There will be screws to screw in, as well as a mounting bracket on each side in the bottom middle of the lawn tractor, along with a screw behind it. The bottom piece will slide into this middle structure with a pulley on the bottom for the belt from the snow thrower. The snow thrower will mount into the mounting bracket placed on the sides and the front of the tractor. It will be held on via a bar with some brackets. The controls will be activated through battery clips, and run towards the driver seat off the thrower. This drive mounting bracket is a genuine OEM part sourced directly from the manufacturer and is sold individually.

This part is a replacement idler bracket. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective idler bracket in lawn tractors.The idler bracket secures the engine's idler in place and is a critical equipment component. It should be replaced if dented, bent, detached, or otherwise rendered ineffective. t's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this ball bearing, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality metal. This idler bracket can be used with different models of lawn tractors that have been manufactured by MTD, Craftsman, and other brands. Part sold individually.

This chute crank assembly is a genuine MTD part, sold individually. A chute crank assembly can be used as a replacement part in a snowblower. This genuine OEM part is made out of high quality, durable metal material that should last throughout the typical lifespan of a snowblower.The chute crank assembly in a snowblower might have to be completely replaced if it has suffered sufficient damage as to reduce or negate the efficacy of its general function within the appliance. If the chute crank assembly has been detached from the appliance altogether, or has been otherwise dented, cracked, punctured, or eroded, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This chute crank assembly is compatible with the following outdoor appliance brands: MTD and Yard Man.

This right angle drive is a genuine MTD part, sold individually. This right angle drive can be used as a replacement part in a snowblower. The purpose of a right angle drive in a snowblower is to allow the appliance to make sharp turns across corners by transmitting a certain amount of torque to the appliance within the gearbox mechanism.The right angle drive in a snowblower might have to be replaced if it can no longer perform its critical function and allow the operator to maintain free range of motion over the appliance while it is in use across a variety of surfaces. If the snowblower is struggling to make turns at its usual pace and speed, it is likely that the right angle drive has suffered damage and will need to be removed and replaced by this genuine OEM replacement part for continued use of the snowblower.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This right angle drive is compatible with the following outdoor appliance brands: MTD.

Protects gearbox components from debris and weather damage. Metal housing keeps internal gears safe from foreign objects. Moderate difficulty repair.

Snow thrower making grinding noises or gears slipping? This gear assembly housing protects and lubricates internal gears for smooth operation.

This replacement part is a gearbox assembly. This is a genuine replacement part made by MTD. The gearbox assembly is commonly found in the engine of most equipment and is responsible for ensuring the parts in the engine are working properly together. A new gearbox assembly might be needed if the current one is visibly damaged in any way, or is missing parts. This is common and typically due to normal wear and tear with years of extended use. Wear work gloves when replacing this part. Refer to the proper user manual for more information and specific instructions on how to replace or repair this gearbox assembly. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

Insulator nut plate for lawn mowers. Self-wrenching fastening component that secures parts within the mower. Replace if cracked, damaged, or missing.

Mulching plug seals the discharge opening on walk-behind and self-propelled mowers. Replace if cracked, broken, or missing to enable mulching mode.

Bowed washer for lawn mowers and tractors. Installs in fastening mechanisms to reduce friction. Replace if worn, damaged, or missing from assembly.

This lift cable assembly is a genuine MTD part, sold individually. This lift cable assembly can be used as a replacement part in a lawn mower or a lawn tractor. The purpose of the lift cable assembly in a lawn mower or a lawn tractor is to affix to the lift shaft assembly and around the roller pulley.The lift cable assembly might need to be replaced at some point within the standard lifespan of a lawn mower or a lawn tractor if the component suffers damage that renders it beyond functionality. This damage can manifest in the form of punctures, scrapes, scratches, dents, cracks, or erosion. If this damage prevents the component from functioning as usual, the lift cable assembly will have to be removed and replaced by this genuine OEM replacement part before using the lawn mower or lawn tractor again. It is a simple replacement process that will require only basic tools.This is a genuine OEM replacement sourced directly from the manufacturer. It is sold individually. This lift cable assembly is compatible with the following outdoor appliance brands: MTD and Troy-Bilt.

Thrust bearing supports axial load and rotation in snowblower drive systems. Replace if you notice wobbling, grinding noises, or reduced performance.