Parts for Ge DBL333GB4CC: 03 - Cabinet & Drum Parts

A replacement pan head screw used to fasten appliance panels and components. Its standard #8 coarse thread and 3/8-inch length secure trim, brackets, and small assemblies for stable operation. What it does:

• Fastens panels, brackets, and small parts in household appliances
• Replaces stripped, rusted, or missing #8-18 pan head screws
• Restores secure mounting where vibration or wear caused looseness
• Works with sheet-metal or threaded inserts designed for #8-18 screws

• Disconnect power to the appliance before beginning any repair
• Use the correct #2 Phillips or compatible driver to avoid cam-out
• Thread in straight and tighten until snug; avoid over-tightening to prevent stripping
• Keep small screws away from children and dispose of old fasteners safely

Drum glide supports the front of your dryer drum for smooth rotation. Replace when you hear scraping or squeaking sounds. Confirm fit with your model.

Supports and stabilizes the dryer drum for smooth rotation. Replace if you hear squealing, grinding, or the drum moves excessively. Confirm fit with your model.

This replacement part is a ball bearing, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This ball bearing is found in dryers and is an important part of the machine as a whole, even though this part is very small. Ball bearings are a rolling element that helps carries loads, reduces friction in the machine, and positions moving parts. The main purpose is to reduce rotational friction. A new ball bearing might be needed if the user notices that additional friction is being placed on the tub of the dryer. If the ball bearings are off-balanced, it is possible that the drum of the appliance will wobble and create loud noises during the drying cycles. Be sure the appliance is cooled down before attempting to replace this part. These ball bearings are sold individually even though dryers typically have more than one. This is a genuine OEM part.

Secures the front panel on dryers. Replace if the panel is loose, rattling, or won't stay in place. Confirm fit with your model number before ordering.

The Drum Support Bearing is an OEM part for GE dryers. This part allows the smooth rotation of the dryer drum. This small yet crucial component plays a pivotal role in the dryer's operation, supporting the back of the drum as it turns, and ensuring that clothes are dried evenly and efficiently.

Over time, the drum support bearing may wear out or become damaged due to the constant friction and heat generated during the dryer's operation.  

Symptoms of a bad Drum Support Bearing include:

• A squealing or grinding noise during operation, indicating that the bearing is worn out.
• Difficulty turning the drum by hand.
• Excessive vibration or shaking of the dryer.
• Increased drying times, as a result of the drum not maintaining the correct speed due to bearing friction.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Secures the rear drum bearing to keep your dryer drum aligned and rotating smoothly. Replace if bracket is cracked, bent, or worn to restore proper support.

Mounting screw for dryer cabinet and panel assembly. Replaces lost, stripped, or damaged screws during repairs or part installations. 10-16B x 1.375".

8 - 18 x 0.31

This is a 10-14 x 1.00 screw used to secure appliance panels and components. It provides a proper fit for threaded openings and restores fastener integrity after repairs. What it does

• Fastens panels, brackets and trim to the appliance frame
• Replaces missing or stripped screws that cause loose or rattling parts
• Secures components that require a 10-14 thread size with a 1.00" length

• Disconnect power to the appliance before servicing
• Use the correct screwdriver or driver bit to avoid cam-out and head damage
• Thread into matching 10-14 female threads only; do not force into incorrect or damaged holes
• Do not overtighten—stop when snug to avoid stripping threads or cracking panels

Replaces a cracked, broken, or missing dryer drum baffle that lifts and tumbles clothes during the drying cycle. Restores proper tumbling action.

Dryer power cord connects your dryer to the wall outlet. Replace if cord is frayed, damaged, or missing. Ensures safe electrical connection.

Dryer drum shaft support with shaft assembly. Replace if drum drops, shaft breaks, or squealing occurs from worn bearings. Verify fit with your model.

Dryer won't start or stops mid-cycle? A faulty safety thermostat often causes heating failures. This direct-fit part restores safe operation.

8 - 18 x .375

This adjustable leveling leg replaces a worn or damaged refrigerator foot to restore stable, level support and smooth door operation. Simple height adjustment helps eliminate rocking and keeps the appliance sitting evenly on uneven floors. What it does:

• Supports the appliance weight and lets you fine-tune height for proper leveling
• Compensates for uneven floors to reduce rocking and wobble
• Helps doors seal and align correctly by allowing height adjustment
• Reduces vibration-related noise when the cabinet sits evenly

• One adjustable leveling leg

• Use gloves and eye protection; unplug the appliance and remove food or shelves near the work area before starting
• Tilt or raise the appliance slightly as recommended by the manufacturer to access the leveling leg; support the cabinet securely
• Turn the leg to raise or lower the appliance; check level and door operation, then recheck after the appliance settles
• If the leg threads or mounting hardware are damaged, replace all affected components before returning the appliance to service