Parts for Crosley CFD28WIQBE: Cabinet Parts

Replacement access panel cover for refrigerators. Shields internal components from dust and debris. Needed when original is cracked, broken, or missing.

Seals your freezer door to keep cold air in and warm air out. Replace when worn, cracked, or causing frost buildup. Verify fit with your model number.

Refrigerator making loud noises or not cooling? A worn evaporator fan blade often causes these issues. DIY-friendly repair typically takes 30 minutes.

Spring component for bottom-mount refrigerators. Replace this part when the original is broken, stretched, worn, or missing to restore proper function.

Nylon washer for the evaporator fan motor shaft in refrigerators. Replace if worn, cracked, or missing to ensure proper fan alignment and operation.

The Motor Mount Bushing is an essential OEM component inside Frigidaire bottom-mount refrigerators. It secures the evaporator fan motor securely while cushioning vibrations transmitted to the refrigerator body.  

Causes of failure include natural wear of plastic glide surfaces from prolonged absorption of mechanical stresses during compressor and fan operation cycles. Deformations compromise uniform motor positioning over time.

Symptoms of a worn motor mount bushing include:

• Rattling noises emanating from the refrigerator fan area
• Reduced air circulation leading to warmer interior temperatures 
• Lubricant leaks at the mounting point requiring replacement

This authentic OEM replacement is compatible with Frigidaire, Electrolux and select Kenmore models.

Seals the coil cover area to maintain proper airflow and prevent dust buildup. Replace if worn, cracked, or losing seal efficiency. Verify fit with your model.

This evap coil cover protects the evaporator and helps direct airflow for more consistent cooling. It replaces damaged or missing covers to reduce frost buildup, keep debris away from the coil, and help prevent interior leaks. What it does:

• Shields the evaporator coil from ice, debris and accidental contact to protect coil fins.
• Helps channel airflow across the coil for improved cooling performance.
• Can reduce frost accumulation and related moisture or dripping symptoms.
• When cracked or missing, you may notice increased frost, water in the cabinet, or reduced cooling.

• Always disconnect power to the appliance before servicing.
• Remove interior liners or access panels to reach the evaporator; handle coil fins and insulation carefully.
• Reinstall any mounting clips, grommets, or insulation exactly as removed to maintain fit and sealing.

Fix uneven cooling in your refrigerator with this air tower assembly. Directs airflow from front to back for uniform temperature. DIY-friendly repair.

Refrigerator not cooling or freezer warm? A failed evaporator fan motor stops air circulation over coils. Easy DIY repair from inside freezer compartment.

Interior light stays on or won't turn on when door opens? This door-activated switch restores automatic on/off lighting. Easy 15-minute fix.

Light lens cover for refrigerator interior lighting. Replaces cracked, yellowed, or missing lens covers. Snaps into place over bulb compartment.

Replace your dim or flickering refrigerator interior LED light assembly for bright, clear visibility. Essential when light fails or flickers. Verify fit with your model number before ordering.

Rubberized seal creating airtight connections between ductwork and fans. Replace if air leaks cause uneven cooling or frost buildup. Confirm fit with model.

Replacement screw fastener for securing panels, trim, and components inside your refrigerator. Needed when original screws are stripped or missing.

Mounting screw for refrigerator components and panels. Replaces lost, stripped, or damaged screws. Essential hardware for secure assembly.

Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.

Replacement screw that secures refrigerator door handles to the door. Needed when the original screw is worn, missing, or stripped, causing a loose handle.

This turntable roller assembly sits under the glass tray to support and guide it as it rotates. Replacing a worn or damaged ring helps restore smooth tray movement for more even heating and dependable microwave performance.

• Supports the glass tray and allows smooth, consistent rotation
• Helps prevent tray wobble, binding, or scraping noises
• Can address issues like the tray not turning or uneven cooking
• Replaces cracked, warped, or missing roller rings

• Disconnect power before servicing
• Remove the glass tray, lift out the old ring, and clean the cavity floor
• Place the new ring wheels-down, seat the tray on the coupler, and test rotation
• Do not operate the microwave without the roller ring and tray properly installed

Secures your refrigerator to the floor or wall to prevent tipping. Replace if bracket is bent, broken, or missing to restore proper stability.

Metal hinge assembly connects refrigerator door to cabinet. Replace if hinge is cracked, broken, bent, or causing door misalignment and poor sealing.

Metal hinge assembly that connects refrigerator doors to the cabinet. Replace if hinge is cracked, broken, or worn causing door misalignment or sagging.

Protects cabinet corners from chips and moisture damage. Replace when trim is cracked, missing, or no longer seals properly. Verify fit with your model.

Replacement corner trim that covers the cabinet edge of your refrigerator. Restores a finished look to cracked, chipped, or missing corner pieces.

OEM mounting bracket that secures the hinge and pin assembly inside your refrigerator. Replace if cracked, broken, or missing to restore proper alignment.

Supports and aligns the refrigerator door at the hinge pivot point. Replace if cracked, bent, or worn to restore stable door operation and proper sealing.

Replacement trim cover cap for your refrigerator. Conceals exposed openings and components for a neat appearance. Order when original is cracked or missing.

Trim cap that covers the upper door hinge assembly. Restores finished appearance and protects hinge area. Replace if cracked, broken, or missing.

Plastic hinge cover that conceals the hinge mechanism on your refrigerator door. Replace if cracked, broken, or missing for a clean appearance.

Replace a cracked or missing upper hinge cover on your refrigerator door. This trim piece conceals hinge hardware for a clean, finished look.

Replaces worn or broken cabinet lid hinge to restore smooth opening and alignment. Install when lid sags or closes unevenly. Confirm fit with model number.

Covers and protects the upper door hinge area on your refrigerator. Replace if cracked, broken, or missing to restore a finished look.

Molded plastic trim piece that conceals the upper door hinge assembly. Replace if cracked, broken, or missing to restore a finished look.

Secures refrigerator grille or trim to cabinet, preventing rattles and gaps. Replace when broken or missing to restore proper panel alignment. Verify fit with your model number before ordering.

Left-hand gray upper hinge cover snaps over the top door hinge to conceal hardware and restore a finished look. Replace when cracked, broken, or missing.

Specs: Hex head ,1/4-20 x 5/8

This turntable roller assembly sits under the glass tray to support and guide it as it rotates. Replacing a worn or damaged ring helps restore smooth tray movement for more even heating and dependable microwave performance.

• Supports the glass tray and allows smooth, consistent rotation
• Helps prevent tray wobble, binding, or scraping noises
• Can address issues like the tray not turning or uneven cooking
• Replaces cracked, warped, or missing roller rings

• Disconnect power before servicing
• Remove the glass tray, lift out the old ring, and clean the cavity floor
• Place the new ring wheels-down, seat the tray on the coupler, and test rotation
• Do not operate the microwave without the roller ring and tray properly installed

Hex head screw that secures panels, brackets, and internal components in refrigerators and appliances. Replace when missing, stripped, or damaged.

The Control Board is an OEM replacement part for Frigidaire refrigerators. It acts as the brain of the appliance, controlling and regulating various functions and components within the refrigerator. This electronic board receives inputs from sensors and user controls, and sends out signals to operate the compressor, fans, defrost cycle, and other systems accordingly.

Symptoms of a bad Control Board include:

• The refrigerator not cooling or maintaining the set temperature
• Display or control panel not functioning properly
• Unusual noises or error codes
• Failure of specific features or components (e.g., ice maker, water dispenser)

Causes of a bad control board can range from electrical malfunctions or power surges, to physical damage from moisture or impact. Over time, the board's internal components can also degrade or fail due to normal wear and tear.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.

Hex head screw that secures panels, brackets, and internal components in refrigerators and appliances. Replace when missing, stripped, or damaged.

Secures panels, brackets, and handles in refrigerators and other appliances. Replace missing or stripped screws to restore secure mounting.

Adjustable leveling foot installs at the bottom of your appliance to ensure stability and proper leveling. Replace if broken, cracked, or missing.

White front grille kickplate for bottom-mount refrigerators. Covers the lower front panel beneath the door. Replace if cracked, discolored, or missing.

Grey plastic grille kickplate that covers the base of your refrigerator. Includes mounting clips. Replace if cracked, melted, broken, or missing.

Hex washer head ,10-32 x 0.375. Ground

This cover assembly replaces a damaged or missing cover on your appliance, protecting internal components and restoring a clean, finished appearance. Use it when the original is cracked, loose, or no longer secures properly.

• Shields internal parts from debris, spills, and accidental contact
• Helps keep components enclosed and aligned for reliable operation
• Restores the appliance's finished look after damage or wear
• Common signs of failure: cracks, broken or missing tabs, discoloration, rattling, or a cover that won't stay in place

• Disconnect power before servicing; shut off water supply if working near water connections
• Remove retaining screws or release tabs; note the orientation of the original cover
• Transfer and reuse original screws, clips, or seals if required
• Do not overtighten fasteners into plastic; ensure all tabs fully engage before testing

Fixes incorrect temperature readings and short cycling. This thermistor monitors fridge temps and signals the control board. Moderate DIY repair.

Replacement outer housing cover for refrigerators. Shields internal components and restores exterior appearance. Needed when original is cracked or broken.

Replacement mounting screw for securing brackets, trims, covers, and components inside your refrigerator. Replace missing, stripped, or lost hardware.

Refrigerator light not turning on or staying on? This light switch controls interior lighting when the door opens and closes. Easy 15-minute fix.

Interior light won't turn on when door opens? This push-button door switch restores automatic lighting. Moderate DIY repair with basic tools.

Interior light won't turn on when door opens? This push-button door switch restores automatic lighting. Moderate DIY repair with basic tools.

Refrigerator won't cool properly or runs constantly? The thermistor monitors temperature and signals the control board. Moderate DIY repair.

Molded plastic evaporator cover that protects the freezer coil assembly and directs airflow. Replace if cracked, broken, or missing for proper cooling.

Refrigerator cover panel that conceals internal components or provides finished appearance. Replace if cracked, discolored, broken, or missing.

Replace your refrigerator's air duct if cracked, broken, or missing. This duct directs airflow between compartments for proper temperature control.

Seals refrigerator door to maintain temperature and reduce energy loss. Replace if worn, torn, or compressed to restore cooling efficiency. Verify fit.

Seals refrigerator door to keep cold air in and warm air out. Replace if torn, cracked, or causing temperature issues. Verify fit with model number.

Secures components to the cabinet frame for solid support and alignment. Replace this bracket if worn, bent, or broken to restore structural stability.

Directs cold air from the evaporator through your freezer compartment. Snaps into the back wall. Replace if cracked, warped, or missing to restore airflow.

Replacement sump cover for bottom-mount refrigerators. Installs under drawers to protect components. Needed when original is cracked, broken, or missing.

Wiring harness for bottom-mount refrigerators. Connects electrical components throughout the unit. Replace if wires are frayed, damaged, or corroded.

Replace a cracked or missing protective trim cover on your refrigerator. This cover shields internal components from dirt and restores a clean look.

Replacement screw for securing panels, components, and assemblies in appliances. Needed when original screws are stripped, lost, or damaged during repair.

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.

Color: White

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.