Parts for Kitchenaid KSC24C8EYB02: 01 - Cabinet Parts

Removes contaminants for clean, great-tasting water and ice. Replace every 6 months or when indicator light activates. Verify fit with your model number.

This refrigerator roller supports the unit's weight and enables smooth movement for positioning and cleaning. Replace when wheels crack or roll roughly.

Replacement 1/4-20 mounting screw for refrigerator panels, brackets, and assemblies. Needed when original fastener is missing, stripped, or lost.

Rear roller that helps move your refrigerator smoothly. Replace if broken, cracked, or wobbling to restore easy mobility. Confirm fit by model number.

Replacement roller axle support shaft for refrigerators. Installs to support rotating assemblies. Replace when worn, damaged, or causing wobble.

Water line extension tube for side-by-side refrigerators. Replaces cracked, leaking, or damaged water supply tubing that connects to ice maker or dispenser.

Replace a cracked, broken, or missing refrigerator mounting bracket. Secures internal components, restores firm support, and reduces rattling.

Adjustable leveling leg for refrigerators and freezers. Installs at base corner to stabilize appliance on uneven floors. Replace if broken or stripped.

This genuine replacement screw secures appliance panels and components where a 12-24 thread fastener is required, restoring proper fit and reducing rattles or loose parts. Easy swap to get panels tight again. What it does:

• Fastens panels, brackets, and internal components that use a 12-24 threaded screw
• Restores secure mounting when original screws are stripped, lost, or corroded
• Helps eliminate vibration-related noise from loose parts
• Works wherever a 12-24 x 1/2 in. screw is specified by the manufacturer

• One 12-24 x 1/2 in. screw

• Use the matching screwdriver or nut driver to avoid stripping the head
• Do not overtighten; stop when the part is snug and seated to prevent damage
• If replacing a stripped or damaged hole, inspect mating threads and repair as needed
• Disconnect power to the appliance before accessing internal components

Fix no ice production or water leaks under your fridge with this water inlet valve. Supplies water to ice maker and dispenser. DIY-friendly repair.

Black door hinge for side-by-side refrigerators. Mounts at top or bottom of door. Replace if cracked, broken, or causing door misalignment issues.

White door hinge for side-by-side refrigerators. Replace this structural component if cracked, broken, or worn to properly secure refrigerator door.

Gray door hinge for side-by-side refrigerators. Replaces cracked, broken, or worn hinges that cause misalignment or sagging doors.

White door hinge for side-by-side refrigerators. Serves as the pivot point for smooth door operation. Replace if loose, misaligned, or broken.

Black door hinge for side-by-side refrigerators. Replaces cracked, broken, or worn hinges that cause door alignment issues or sagging doors.

The Hinge-Door is an OEM part for Whirlpool refrigerators. The refrigerator door hinge is a crucial component that allows the door to properly open and close while securely holding it in place. These hinges are responsible for smooth and reliable door operation through thousands of openings and closings. 

Causes of a bad hinge can include wear and tear from prolonged use, stress from overloading the door, or accidental impact damage. 

Symptoms of a bad hinge include:

• The door not closing properly or staying fully shut  
• Difficulty or resistance when opening/closing the door
• The door sagging or wobbling excessively
• Noise or grinding sounds coming from the hinge area

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Replacement 8-18 threaded screw for securing refrigerator panels, brackets, and components. Needed when original screw is missing, stripped, or damaged.

Replacement screw that fastens panels, brackets, and internal components. Install when original is stripped, rusted, missing, or lost during repairs.

Color: Black. For biscuit order 98008169. For white order WP98008544.

White door hinge for side-by-side refrigerators. Replaces cracked, broken, or missing hinges that support and align the refrigerator door properly.

Black refrigerator door hinge that mounts the door to the cabinet frame. Replace if hinge is cracked, bent, or missing to restore proper door alignment.

Replace your refrigerator's grey door hinge if it's cracked, broken, or worn. This structural component secures the door for proper alignment and operation.

Supports and pivots your refrigerator door for smooth opening and flush closing. Replace if hinge is worn, damaged, or causing misalignment issues.

This door hinge supports and pivots the appliance door for smooth, aligned opening and closing. Replacing a worn hinge restores proper closing and helps the latch and door seal make consistent contact. What it does:

• Provides the pivot point and structural support for the door
• Maintains door alignment for correct latch engagement and seal contact
• Helps prevent binding, sagging, uneven movement, and squeaks
• Common fix for doors that won't close fully or feel loose/wobbly
• Replaces hinges that are bent, cracked, or show excessive play

• 1 door hinge

• Disconnect power (and shut off gas/water if applicable) before servicing
• Support the door to prevent strain; removal may be required to access the hinge
• Remove hinge cover/trim and mounting screws; transfer any hardware to the new hinge
• After installation, verify alignment and closure; adjust as needed for proper latch and seal contact

Replaces worn or broken refrigerator door hinge cam. Restores smooth door pivot and secure closing. Essential when cam is cracked or door misaligns.

Supports and pivots your refrigerator door for smooth opening and flush closing. Replace if hinge is worn, damaged, or causing misalignment issues.

This door hinge supports and pivots the appliance door for smooth, aligned opening and closing. Replacing a worn hinge restores proper closing and helps the latch and door seal make consistent contact. What it does:

• Provides the pivot point and structural support for the door
• Maintains door alignment for correct latch engagement and seal contact
• Helps prevent binding, sagging, uneven movement, and squeaks
• Common fix for doors that won't close fully or feel loose/wobbly
• Replaces hinges that are bent, cracked, or show excessive play

• 1 door hinge

• Disconnect power (and shut off gas/water if applicable) before servicing
• Support the door to prevent strain; removal may be required to access the hinge
• Remove hinge cover/trim and mounting screws; transfer any hardware to the new hinge
• After installation, verify alignment and closure; adjust as needed for proper latch and seal contact

Replaces worn or broken refrigerator door hinge cam. Restores smooth door pivot and secure closing. Essential when cam is cracked or door misaligns.

Replacement mounting screw for refrigerator panels, brackets, and internal components. Replace missing or stripped screws to restore secure fit.

Replace your refrigerator's control console top cover if cracked, broken, or missing. Protects control panel buttons and components while providing a finished look.

Black plastic corner cover replaces damaged or missing exterior trim on your refrigerator. Restores finished appearance and protects edges from wear.

Replaces missing or damaged corner trim filler on your refrigerator. Restores a clean, finished look to interior or exterior cabinet seams and edges.

White base grill (toe kick) for the lower front of your refrigerator. Replaces a cracked, faded, or missing panel to restore a finished look.

Lower front grille that covers the base opening of your refrigerator. Replace if cracked, broken, or missing to restore a finished look.

Covers the lower front of your refrigerator in midnight gray. Replaces cracked, broken, or missing grilles to restore airflow and a finished look.

Door won't close or latch properly? This door cam guides the latch mechanism to restore secure door closure and prevent gaps or misalignment issues.

This cam door replaces the small plastic cam that guides and supports the appliance door mechanism, restoring proper door alignment and secure closing so the appliance can latch and operate reliably. What it does:

• Guides the door or door strike into the correct position during closing
• Helps the latch engage so the appliance recognizes the door as closed
• Replaces worn, cracked, or broken cams that cause misalignment or noisy operation
• Can stop symptoms such as a door that won't seat, rattles when closing, or prevents the appliance from starting

• One cam door (single replacement cam)

• Disconnect power (and water if applicable) before starting any repair
• Remove the door or access panel per your model's service instructions to reach the cam
• Verify cam orientation and engagement with the latch/strike before final assembly

Mounts at the bottom hinge to raise and lower the refrigerator door as it swings. Replace if cracked, worn, or broken to restore smooth self-closing.

Replacement silverware basket with handle for dishwasher lower rack. Holds utensils upright for better cleaning. Replaces cracked, broken, or missing baskets.

Replaces the refrigerator water inlet tube that routes water from the inlet valve to the internal water system. Order a new tube if cracked or leaking.

Leaking water on floor or small ice cubes? This water tube routes supply water to your ice maker and dispenser. Takes about 10 minutes to replace.

Water line fitting for refrigerator ice maker and dispenser connections. Replace if cracked, leaking, or broken to restore proper water flow.

This is a high-quality refrigerator power supply board. It's an internal component that is made to control the refrigerator functions. This part is made with small precision parts to help with timing defrost and cooling cycles. This part can be damaged or malfunction and stop operating correctly. This may prevent the refrigerator from running, cause strange sounds, or cause the refrigerator to run at the wrong temperature.If this part is damaged, it will need to be replaced. Before replacing the power supply board, make sure the refrigerator is unplugged from the wall. The process will require a flathead screwdriver and a nut driver. Use the tools to unthread the screws on the access cover. Depress the retaining tab to remove the inner cover and disconnect the wires. Press the tab to release the power supply board and snap in the new component. Make sure the wires are properly connected and reassemble.This genuine OEM replacement part is sold on an individual basis. It is directly acquired from the manufacturer and is designed to be compatible with refrigerators made by Kenmore, Whirlpool, Maytag, and KitchenAid.

Fixes unresponsive controls, erratic temperatures, and frozen evaporator coils. This main control board restores proper cooling and user interface function.

Replace a cracked, broken, or missing refrigerator mounting bracket. Secures internal components, restores firm support, and reduces rattling.