Parts for Ge DFE29JGDABB: 10 - Case Parts

Water filter bypass plug allows your refrigerator to operate without a filter by creating direct water flow. Replace if damaged or worn. Confirm fit with your model.

If your water line is leaking or disconnected, this coupler connects tubing in your refrigerator. Simple push-in design for DIY repair in under 15 minutes.

SCR solid-state switching module that controls power flow in refrigerator circuits. Replace when module is damaged, burned out, or failing to switch properly.

The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.

Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.

Symptoms of a compromised screw placement include:

• Noises or abnormal sounds coming from inside the tub  
• Intermittent error codes related to moving components
• Detached or misaligned spray arms or filters
• Insecure tub fixtures that can be jarred with normal operation 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Fix loud fan noise or no ice production. This icemaker fan with thermistor circulates air and monitors temperature for proper ice cube freezing.

Interior light not working when door opens? This light switch controls refrigerator illumination. DIY-friendly install takes 30-45 minutes with video.

Hex washer head screw secures panels, brackets, and small assemblies inside refrigerators and ranges. Replace stripped, missing, or damaged screws.

This 8-18 x 3/4 machine screw fastens appliance panels and small brackets to keep components secure and stable. It's a direct-fit replacement screw used where the original hardware has stripped, broken, or gone missing. What it does:

• Secures access panels, mounting brackets, and small assemblies
• Restores proper alignment and reduces rattling or vibration
• Replaces stripped or damaged fasteners
• Keeps wiring and components held in place for safe operation

• Unplug the appliance or disconnect power before starting work
• Use the correct driver and size to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to parts
• Replace corroded or damaged fasteners for best results

Secures and guides your refrigerator door at the upper hinge for proper alignment and a tight seal. Replace if your door sags or won't close properly.

Fix low water flow or no ice production with this flexible PEX water supply line. Connects household water to your refrigerator dispenser and ice maker.

Replaces a cracked, broken, or missing left-side top hinge pad on your refrigerator. Restores proper door support and alignment where the door meets the cabinet top for smooth opening and secure closing.

Case back tube for bottom-mount refrigerators. Installs behind the refrigerator case. Replace if cracked, damaged, or leaking to restore proper function.

Replacement grille thermistor. This temperature sensor monitors air at the grille location and relays the signal to the control so cooling and defrost responses stay consistent and food stays within target temperatures.

• Senses ambient air temperature at the grille and varies resistance with temperature
• Sends data to the control to help regulate compressor/fan run time and defrost intervals
• Aids in maintaining stable refrigerator and freezer temperatures
• A failing sensor may lead to temperature swings, extended run time, or irregular defrosting

• Disconnect power before servicing
• Remove the grille/kickplate to access the sensor and its connector
• Disconnect the old sensor, install the new one, and route wiring as originally; ensure the sensor is fully seated and wires aren't pinched
• Restore power and allow up to 24 hours for temperatures to stabilize

Hinge center assembly for refrigerator right door. Restores proper alignment, reduces door sag, and improves seal. Confirm fit with your model number.

Fix wilting produce in crisper drawers with this humidity control board. Restores proper moisture regulation to keep fruits and vegetables fresh longer.

The Door Light Switch is an OEM part for GE refrigerators. It is located near the top of the refrigerator compartment, and it is activated by the door's movement. When the door is opened, the switch is triggered, turning on the interior light to provide visibility. When the door is closed, the switch is released, turning off the light to conserve energy.

Causes of a faulty or damaged door light switch can include regular wear and tear, electrical malfunctions, or physical damage. These factors can result in issues such as the interior light not turning on or off properly, or the light staying illuminated even when the door is closed.

Symptoms of a bad door light switch may include:

• The interior light not turning on when the door is opened
• The interior light not turning off when the door is closed
• Inconsistent or flickering operation of the interior light

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Protects and diffuses LED light inside your refrigerator. Replace if cracked, discolored, or causing dim lighting. Verify fit with your model number.

Fixes slow water dispensing or small ice cubes in your refrigerator. The filter manifold connects your water filter to the dispenser and ice maker.