Parts for Gaggenau BM281730/01: Cavity Parts

Flat metal washer distributes load under nuts and bolts in your oven. Replace when worn, missing, or damaged to maintain proper alignment. Verify fit.

Replace a cracked, broken, or worn microwave turntable ring. This roller ring sits beneath the glass tray, using small wheels to support smooth rotation.

This door latch assembly secures the door closed and signals the control that it's safely shut, allowing cycles to start and run. Replacing a worn latch restores a reliable safety interlock and consistent operation.

• Secures the door and engages the safety interlock so the appliance can operate
• Sends a "door closed" signal to the control
• Common symptoms: door won't latch or stay closed; unit won't start or pauses as if the door is open; intermittent operation when the door is bumped; visible wear or damage to the latch
• Helps prevent nuisance "door open" indications

• Disconnect power before servicing
• Access the latch from the door area; remove inner panel or trim as required by your model
• Note wire positions, transfer connectors, and mount the new latch in the same orientation
• Test door closure before reassembly

This door latch assembly secures the door closed and signals the control that it's safely shut, allowing cycles to start and run. Replacing a worn latch restores a reliable safety interlock and consistent operation.

• Secures the door and engages the safety interlock so the appliance can operate
• Sends a "door closed" signal to the control
• Common symptoms: door won't latch or stay closed; unit won't start or pauses as if the door is open; intermittent operation when the door is bumped; visible wear or damage to the latch
• Helps prevent nuisance "door open" indications

• Disconnect power before servicing
• Access the latch from the door area; remove inner panel or trim as required by your model
• Note wire positions, transfer connectors, and mount the new latch in the same orientation
• Test door closure before reassembly

This door latch assembly secures the door closed and signals the control that it's safely shut, allowing cycles to start and run. Replacing a worn latch restores a reliable safety interlock and consistent operation.

• Secures the door and engages the safety interlock so the appliance can operate
• Sends a "door closed" signal to the control
• Common symptoms: door won't latch or stay closed; unit won't start or pauses as if the door is open; intermittent operation when the door is bumped; visible wear or damage to the latch
• Helps prevent nuisance "door open" indications

• Disconnect power before servicing
• Access the latch from the door area; remove inner panel or trim as required by your model
• Note wire positions, transfer connectors, and mount the new latch in the same orientation
• Test door closure before reassembly

Door guide for wall ovens and microwaves. Helps the door glide smoothly along its track. Replace if cracked, broken, or causing uneven door movement.

Fix uneven cooking or steam function errors with a new oven steam sensor. This part monitors moisture levels for precise cooking results.

Light not coming on when door opens or during cooking? This interior light bulb restores visibility inside your microwave or oven cavity.

The Switch is an OEM component specifically designed for Bosch microwaves. It controls critical heating elements and fan functions through the direct user interface. Seamless button response allows convenient operation.

Symptoms of a faulty switch involve non-responsiveness or inaccurate reaction to control presses. Opening from wear over extended usage risks compromised performance warranting replacement. 

Causes of a bad switch include normal degradation inhibiting smooth movements. Exposure to moisture-increasing interior corrosion necessitates a change to restore full functionality.

Symptoms of a bad switch include: 

• Microwave fails to start or prematurely stops cooking cycles  
• Inaccurate power levels result in uneven heating
• Inoperative special features like popcorn do not engage

This OEM Bosch part is also compatible with some Thermador, Blomberg, and Miele microwaves. Replace to maintain dependable command of essential microwave functions.
 

Fix a microwave or oven that won't start or respond to controls with this switch replacement. Opens and closes circuits to restore reliable operation.

This door latch assembly secures the door closed and signals the control that it's safely shut, allowing cycles to start and run. Replacing a worn latch restores a reliable safety interlock and consistent operation.

• Secures the door and engages the safety interlock so the appliance can operate
• Sends a "door closed" signal to the control
• Common symptoms: door won't latch or stay closed; unit won't start or pauses as if the door is open; intermittent operation when the door is bumped; visible wear or damage to the latch
• Helps prevent nuisance "door open" indications

• Disconnect power before servicing
• Access the latch from the door area; remove inner panel or trim as required by your model
• Note wire positions, transfer connectors, and mount the new latch in the same orientation
• Test door closure before reassembly

Microwave won't heat or shuts off unexpectedly? The thermal relay disconnects power when temperatures exceed safe limits. Protects against overheating damage.

This electrical switch restores reliable on/off signaling for a specific function in your appliance. Replacing a worn or burned switch helps ensure consistent activation and dependable operation of the affected feature. What it does

• Opens and closes an electrical circuit when actuated to start/stop a function
• Sends a clear signal to the control or power circuit for the selected operation
• Failure symptoms include the function not engaging, intermittent operation, or no response when actuated
• Visual clues can include darkened, melted, or loose terminals and an inconsistent click/feel

• 1 switch

• Disconnect power to the appliance before servicing; shut off water or gas if applicable
• Note wire positions and transfer connectors one at a time to the correct terminals
• Seat terminals fully and secure the switch without overtightening; avoid bending the actuator
• Test operation before final reassembly to ensure proper engagement

The PC Board is an OEM component specifically designed for Bosch microwaves. As the central control unit, the PC board regulates and monitors the functioning of the microwave features and components. 

Symptoms of a bad PC board include:

• Lights or display not working properly  
• Inability to start or stop the microwave
• Failure of sensor or preset cooking functions
• Random or unexpected operation of buttons/dials

Causes of a bad PC board can be damage from power surges, spilled liquids inside the unit, or normal wear and tear over several years of use.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This microwave magnetron generates the radio-frequency energy that heats food. Replace a failed unit to restore proper cooking performance when the microwave runs but no longer heats or heats weakly or intermittently. What it does:

• Produces microwave energy that is directed through the waveguide into the oven cavity
• Common failure symptoms: runs but won't heat, weak or intermittent heating
• Presents with an unusually loud humming/buzzing during operation
• Restores proper cooking power when the original magnetron has failed

• One magnetron assembly

• Disconnect power before service; high-voltage components can retain a dangerous charge—discharge the HV capacitor safely
• Note magnetron orientation and transfer any brackets/screws from the original as required
• Avoid touching the antenna tip; ensure the waveguide seal seats correctly and the cavity/waveguide cover is clean and intact
• After reassembly, test with a cup of water and verify proper airflow and normal sound

Microwave won't power on? A blown fuse is often the culprit. This protective component prevents electrical damage from power surges. DIY repair in 1-2 hours.

Microwave grease filter traps cooking vapors and grease. Replace when discolored or damaged to maintain proper ventilation. Confirm fit with your model.

This small plastic clip secures internal components or wiring to the appliance chassis to prevent rubbing, movement, or noise. Replacing a worn or broken clip restores secure routing and reduces vibration-related sounds. What it does:

• Holds wiring harnesses or small parts in place to prevent chafing and wear
• Stops loose components from shifting during operation and causing rattles
• Helps maintain correct component alignment for reliable performance
• A broken or missing clip can allow wires or parts to contact moving pieces or hot surfaces

• Disconnect power to the appliance before starting any repair
• Clip typically presses into a matching slot or snaps over the component; no special tools usually required
• Handle small parts carefully; retain any removed fasteners for reuse
• If routing or mounting points are damaged, inspect surrounding parts for wear and replace as needed

A replacement mounting screw used to fasten appliance panels and components. Simple, direct fit when the original fastener is lost or damaged—restores secure assembly and helps prevent rattles or loose parts. What it does:

• Secures panels, brackets, or small components to the appliance frame
• Restores proper alignment and reduces vibration or noise from loose parts
• Replaces a missing, stripped, or corroded factory screw
• Used wherever the OEM lists part 00606699 as the specified fastener

• Use the matching driver bit and hand-tighten; avoid over-torquing which can strip threads
• Verify correct screw location and length before installation to prevent contact with internal components
• Disconnect power and water (if applicable) and follow appliance safety procedures before servicing

The Cooking Tray is an OEM part for Bosch microwaves. As the centerpiece of the microwave, the cooking tray ensures even cooking by rotating food items during the cooking cycle. It supports dishes and rotates continuously to evenly distribute microwave energy throughout recipes.

Causes of a bad cooking tray can include wear and tear due to extended use over time. Food splatter or spills left inside the microwave may damage or corrode the tray. Accidental dropping or cracking of heavier dishes placed on the tray can also cause issues.

Symptoms of a bad cooking tray include:

• The tray not spinning or rotating properly during cooking
• Unevenly or partially cooked food
• Loud grinding or scraping noises coming from the tray
• Cracks or breaks visible in the plastic surface

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Replacement housing cover for microwaves and ovens. Closes and protects internal openings. Restores secure fit when original is cracked, missing, or warped.