Parts for Craftsman 944415360: Chain / Bar / Handle / Housing Parts

Replace your chainsaw's trigger and lockout kit if the original is cracked, broken, or worn. Mounts near the top handle for safe operation control.

Internal fastening screw for chainsaw assembly. Secures components within the engine housing. Replace if stripped, missing, or damaged during maintenance.

Fuel pickup filter draws gas from tank to carburetor. Replace if engine won't start or runs poorly due to clogged filter. Verify fit with your model number.

The rear isolator spring is a genuine replacement part found in select models of chainsaws. This authentic part is made of durable metal and is responsible for providing tension between the chassis and rear handle to keep the unit operating properly. The spring could become worn over time, or it could become lost during other repairs. If this rear isolator spring is lost or damaged, it will need to be replaced with a genuine OEM model like this one before the unit will be safe to use. Pliers and an Allen wrench are to replace this part, which is sold individually and does not include any other parts or hardware. The rear isolator spring is manufactured to exact standards by Poulan and can be used in compatible models of chainsaws from Jonsered, Husqvarna, and Poulan. Users should wear gloves and allow the unit to cool completely, as well as to disengage the spark plug for safety when performing repairs on chainsaws.

Clutch washer kit includes washer and clip. Protects engine by evenly distributing pressure at connection points. Replace if worn, corroded, or missing.

Chain not turning or squealing noise when accelerating? The clutch drum drives the chain and may need replacement. Easy repair, complete in under an hour.

Chain won't rotate or chainsaw overheating and locking up? The clutch assembly connects the engine to the chain drive. Moderate DIY repair.

Fix clutch slippage or excessive vibration with this chainsaw clutch washer. Spaces components to prevent friction and wear. Simple repair part.

The ignition coil module is a part found in chainsaws that electricity runs through. It also helps transmit electricity to the spark plug so the tool works properly. The electricity builds sparks in the plug which ignites the fuel in the engine to ensure the chainsaws can power on. If the ignition coil fails, it will prevent the saw from starting since the spark plug is unable to operate. Testing the ignition coil is simple and can be done in 15 minutes or less. Remove the chainsaw's spark plug wire and then take out the spark plug. Remove the recoil starter on the side and look for the kill switch. This needs to be disconnected from the harness before the starter assembly is replaced. Spread the spark plug gap and place the boot on top of it. Next, pull the start rope while watching the plug. If there is no spark, the ignition coil module needs to be replaced. This is a genuine OEM part that comes directly from the manufacturer. It is compatible with chainsaws made by Poulan, Poulan Pro, and Craftsman. It comes as a single individual ignition coil. An ignition coil tester can be useful to have for replacement.

Fix a chainsaw that won't pull-start or has a broken recoil cord. This starter pulley connects the recoil mechanism to engage the engine during starting.

Fastening screw for chainsaws. Connects and holds together various chainsaw components. Replace if screw is stripped, missing, or damaged.

If your chainsaw rope won't retract after pulling, the starter spring likely needs replacement. This spring creates the recoil to start the engine.

This replacement part is an oil vent assembly. This is a genuine replacement part made by Husqvarna. This part works directly with the oil vent to ensure the proper settings and operation of the engine and machine as a whole. A new oil vent assembly might be needed if the current one is missing or damaged in any way. If the vent has been obstructed or is too dirty to clean it might be time to replace this part. Work gloves are recommended when repairing or replacing this part as the oil can stain hands and be hard to clean. It is also recommended that the engine be powered off before attempting to replace this part. This oil vent assembly is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.

The oil tank cap helps keep dirt, insects, and flying debris out of the tank and oil inside of it. Contaminated oil can wreak havoc on the inner workings of your engine because of foreign particles gumming up the mechanics. Keeping the lid tightly shut is the best way to keep your oil clean. Oil caps attach to the outside of a machine, so they are susceptible to physical damage and the elements. It is time to replace the oil cap if it will no longer connect completely to the oil tank. With this genuine OEM product from the original manufacturer, quickly and easily swap out the oil cap before anything can fall into the tank. Just remove the broken cap, feed the blocker into the tank, and screw the new cap on. Compatible with string trimmers and chainsaws made by Craftsman, Poulan, and Poulan Pro. Sold individually.

Broken or damaged hand guard leaving your chainsaw unsafe? This chain brake guard protects your hand and engages the safety brake. Direct fit replacement.

Returns the handguard to forward position on chainsaws. Replace if broken, damaged, or handguard no longer springs back when released. Restores safety.

Chain won't stop when brake is engaged? This chain brake kit tightens around the clutch drum to stop the chain immediately on kickback. Moderate install.

Holds the guide bar securely in place and reduces vibration on your chainsaw. Replace if cracked, broken, or worn to restore proper bar alignment.

Replace your chainsaw's isolator spring to restore vibration dampening between the chassis and engine. Essential when springs break or lose tension.

Front handle isolator spring assembly that mounts on the front handle to dampen vibrations. Replace if spring is cracked, broken, or missing for safe use.

Front handle for chainsaws. Attaches to the body to provide grip and control during operation. Replace if cracked, broken, or damaged for safe handling.

If your chainsaw bar isn't getting oil and the chain is overheating, the oil pump may have failed. This pump delivers lubrication to the bar and chain.

This part can be used to replace a deteriorating or leaking oil pick-up in chainsaws. An oil pick-up is essential for a smooth-running piece of equipment, as it supplies oil to the engine. Over time, oil pick-ups can become worn, which can cause leaks and prevent the engine from receiving the necessary supply of oil to operate properly. This part is manufactured from high-quality, durable plastic and non-corrosive metal. This assembly pick-up oil tank is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement assembly pick-up oil tank fits various different models of Husqvarna and Poulan chainsaws. Please note this part is sold individually.

Bar and chain not getting enough oil? This chainsaw oil pump assembly delivers proper lubrication to reduce friction and overheating during operation.