Need Help?
Call or text
Show parts
Usually ships within 4 - 14 days
This Crystal blue lens is a decorative replacement trim piece that restores the original look of your appliance and keeps controls or indicators covered and visible. It provides a clean, finished appearance where the colored lens is used. What it does:
This replacement gear housing secures and encloses the drive gears that transfer motor motion to the washer's agitator/drive assembly, restoring proper mechanical drive function and reducing noise from worn or damaged housings. What it does:
This part is discontinued by the manufacturer and is no longer available for purchase.
Motor housing for stand mixers. Covers and protects the internal motor assembly. Replace if cracked, damaged, or broken to restore appearance.
This replacement housing provides the structural enclosure for the associated appliance components, keeping them supported and protected so the unit operates safely and reliably. What it does:
Empire red housing for stand mixers. Replaces cracked, chipped, or discolored exterior covers. Restores appearance and protects internal components.
Replaces the front grille housing on your stand mixer. Needed when the original is cracked, warped, discolored, or missing. Almond creme finish.
Imperial gray body housing cover for stand mixers. Replace this outer shell if cracked, scratched, discolored, or damaged. Restores mixer appearance.
Fix grinding noises or bowl rotation issues with this gearcase housing. Protects motor gears and restores smooth operation in your stand mixer.
If your stand mixer runs loud or vibrates excessively, a cracked motor housing may be the cause. This housing secures and protects the motor assembly.
This gearcase housing is the molded outer case that supports and protects the washer transmission/gearcase assembly, keeping internal gears aligned for reliable spin and agitation performance. What it does
Fix excessive vibration or unusual motor noise with this stand mixer motor housing. Secures and aligns the motor for stable, quiet operation.
White trim band for stand mixers. Replaces cracked, chipped, or discolored decorative trim ring. Fits around the motor housing for a clean finish.
Decorative trim band for stand mixers. Installs around the motor housing base. Replace if cracked, chipped, discolored, or missing for a clean look.
This end cover protects and finishes the exposed end of the appliance component, keeping wiring and internal parts shielded while restoring the original appearance. It fits into the component housing and snaps into place for a clean finish. What it does:
This is a small lemon-scented fragrance sachet designed to refresh appliance interiors and help reduce unpleasant odors. It provides a mild, pleasant scent to keep the compartment smelling clean between deep cleans. What it does
This replacement cover is an access panel that protects internal components and restores the appliance's appearance. It keeps wiring and mechanical parts shielded while maintaining a clean exterior surface. What it does:
This is a Glacier Blue finish piece used to match or replace the colored trim on compatible appliance panels, restoring appearance and consistent styling. What it does
This replacement cover protects internal components and restores the appliance's exterior appearance. It keeps wires and parts sheltered from dust and debris while providing a finished surface for the area it attaches to. What it does:
This replacement cover restores the appliance's exterior finish and protects internal components from dust and damage. It helps maintain safe operation and a factory appearance after damage or wear. What it does:
Replace the end cover on your stand mixer when the original is cracked, broken, or missing. This cosmetic panel installs on the motor housing end.
Replacement cover for stand mixer housing. Protects internal components and provides finished appearance. Needed when original is cracked or broken.
Replacement trim panel cover for stand mixers. Restores exterior finish and protects internal components. Replaces cracked, broken, or missing panels.
White console end cap for stand mixers. Covers the exposed end of the motor housing for a finished look. Replace if cracked, broken, or missing.
Cobalt blue cover that restores your mixer's exterior appearance. Replaces the original panel when it's cracked, faded, worn, or missing.
Replacement access panel cover for stand mixers. Shields internal wiring and controls while restoring exterior appearance. Replaces cracked or missing covers.
Factory-matched Almond Crème touch-up paint for stand mixers. Covers small chips, scratches, and worn spots on Almond-finish appliances for a cleaner look.
White plastic back cover for stand mixers. Protects internal components at rear of motor housing. Replace if cracked, broken, or missing.
Mixer not spinning or making grinding noises? This planetary gear assembly drives the beater rotation. Moderate DIY repair in about 45 minutes.
If your mixer won't spin or makes grinding noises, the planetary gear assembly may be worn. This part transfers motor power to attachments. Moderate DIY.
Fix grinding noise and poor mixing with this planetary assembly. Restores drive alignment for smooth mixer operation. Moderate DIY repair for most users.
Fix mixer wobbling or grinding noises with this planetary gear assembly. Essential for smooth mixing action. Moderate repair with periodic greasing.
Fixes grinding noise and erratic mixing. This planetary gear assembly restores smooth rotation in your stand mixer. Moderate DIY repair with proper tools.
Color: White
Fix mixer grinding noises or gear slipping with this gearcase assembly. Common repair for stand mixers that won't mix properly or make unusual sounds.
Fix a stand mixer that's making grinding noises or won't mix properly with this gearcase assembly. Common repair for worn internal gears.
Mixer not turning or making grinding noises? This gearcase assembly houses the planetary gears that drive your attachments. Moderate DIY repair.
Replaces the cracked, broken, or worn lower casing on tilt-head stand mixers. Restores cosmetic finish and structural support for proper operation.
Gray housing cover for stand mixers. Replaces cracked, chipped, or discolored exterior covers. Restores the appearance of your mixer's body shell.
This direct-drive gearcase converts the washer motor's power into the agitation and spin motions. Replacing a worn gearcase restores normal drive function so the washer can agitate and spin as intended. What it does
Decorative grille that covers the control area on your stand mixer. Replace if cracked, damaged, or loose to restore a clean, finished appearance.
Almond Creme finish panel for stand mixers. Restores exterior appearance when original panel is scratched, worn, or discolored. Direct replacement.
This Imperial Black finish touch-up restores the appliance's exterior color for a cleaner, uniform look and helps hide minor scratches or chips. Ideal for spot repairs to maintain the appliance's appearance. What it does:
Replacement pedestal base for stand mixers. Supports and stabilizes the mixer body. Order a new pedestal if yours is cracked, damaged, or discolored.
This pedestal raises a front-load washer or dryer to a more comfortable working height while providing a built-in storage drawer for laundry essentials. It helps reduce bending and creates convenient under-appliance storage. What it does:
This pedestal provides a raised base with a pull-out storage drawer to improve ergonomics and keep laundry supplies organized. It lifts the appliance for easier loading and unloading while adding convenient under-appliance storage. What it does:
Pedestal and feet assembly for stand mixers. Raises and stabilizes the mixer base. Replace if cracked, broken, or worn to restore proper alignment.
This pedestal elevates a front-load laundry appliance and adds a built-in storage drawer to keep detergent and supplies within easy reach, improving ergonomics and convenience during use. What it does:
White pedestal base for stand mixers. Replaces cracked, chipped, or damaged pedestals that affect stability and appearance. Restores base support.