Parts for Ge CGS750P2M2S1: Control Panel & Cooktop Parts

Can't control your range from your phone or app? This Wi-Fi module restores smart connectivity when remote features stop working or won't connect.

Stainless steel manifold panel for gas ranges. Replaces the front control panel housing burner controls. Ideal for repairing dented, scratched, or corroded panels.

Size: 8 - 32 inch.

Fix burners that won't ignite with a new spark module. Generates the spark to light gas cooktop burners. Common DIY repair for multiple burners failing.

Burner won't light or ignites slowly? This electrode top and harness restores spark delivery to gas range burners. DIY-friendly repair.

This cooktop grate sits over your gas range burners to support cookware and distribute heat evenly. Replace if cracked, broken, or missing hardware.

Replace your damaged or worn gas range cooktop surface. This top assembly covers the burner area and completes the appearance of your range.

Center grate for gas ranges that sits above the middle burner. Replace if cracked, warped, or damaged to restore proper cookware support.

This factory fastener secures internal components or panels in your appliance. Replacing a missing or stripped screw restores a snug fit, helps prevent vibration or rattling, and keeps assemblies aligned for proper operation.

• Secures brackets, panels, or internal components to the frame
• Replaces missing, rusted, or stripped hardware
• Helps reduce rattling, vibration, or loose-fit issues
• Maintains proper alignment and fit of assemblies

• Disconnect power before servicing
• Use the correct driver to avoid stripping the screw head
• Install in the original location; match thread and length to the original
• Tighten until snug; do not overtighten, especially into plastic or thin metal

Trim kit for gas ranges. Installs around cooktop or control panel to cover gaps and provide a finished appearance. Replace if cracked or missing.

Stainless steel #8-18 x 3/8" screw secures panels, brackets, and components in ranges, cooktops, and ovens. Replace if stripped, missing, or corroded.

Unresponsive touch controls or cracked control panel glass? This sealed glass touch board assembly restores responsive controls on select gas ranges.

The Burner Cap is an OEM replacement part for GE gas cooktops. This one is the outer part of the burner cap that sits over the inner burner head and flames on a gas cooktop burner. The cap helps protect the inner burner parts while also directing and controlling the burner flame.

Symptoms of a faulty burner cap include:

• Uneven or weak flame
• Gas leakage around the burner heads
• Difficulty in adjusting the flame intensity

A bad outer cap can occur due to wear and tear, accidental damage, or exposure to high temperatures. If you notice signs of damage, such as cracks, discoloration, or a loose fit, it may be time to replace the outer cap. Replacing this part can help improve burner performance and flame if the old cap is damaged or corroded. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

Medium burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn from use.

Burner cap covers the burner head and distributes flame evenly on gas ranges and cooktops. Replace if cracked, warped, or missing for proper cooking.

Burner cap assembly covers the burner head on gas cooktops and ranges. Replace cracked, stained, corroded, or missing caps to restore appearance.

The burner cap is an OEM component specifically designed for GE wall ovens and ranges. The inner burner cap is responsible for evenly distributing heat across the burner surface while protecting the burner element underneath. 

Causes of a bad burner cap can include damage from scratches or cracks that occur over time from regular use and cleaning. The burner cap material may also deteriorate due to exposure to high heat.

Symptoms of a bad burner cap include:

• Uneven or inconsistent burner performance  
• Hot spots on the burner surface
• Damage or cracking visible on the cap
• Difficulty cleaning residue or spills from the burner area

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replacement burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn.

Replacement small surface burner for gas ranges and cooktops. Restores proper flame control when original burner is damaged, cracked, or corroded.

Replacement burner head for gas ranges and cooktops. Installs on stovetop to distribute flame evenly. Replace if warped, cracked, or causing uneven flames.

The Base Burner is an OEM part for GE gas range and cooktops. It securely holds the burner assembly in place on the cooktop. 

Symptoms of a faulty base burner include:  

• Loose or wobbly burners that could tip or shift during cooking
• Difficulty cleaning accumulated debris from recessed areas  
• Potential gas or electric exposed connection hazards

Causes involve worn or cracked mounting brackets after years of use, missing or stripped retention screws, and impact damage to supports.

This OEM part is compatible with Hotpoint and RCA electric range brands as well.

Medium-sized surface burner for gas cooktops and ranges. Installs on the cooktop surface. Replace if cracked, worn, or providing uneven heat distribution.

The Burner, Large V2 is an OEM part for GE gas ranges. It is designed to provide a consistent and even flame for cooking, ensuring efficient heat distribution for large pots and pans.

Causes of a bad burner can include clogging from food spills, wear and tear from frequent use, or damage from cleaning processes. A malfunctioning burner can lead to uneven cooking and reduced heating efficiency.

Symptoms of a bad burner include:

• Uneven or weak flame
• Burner not igniting properly
• Sputtering or inconsistent flame
• Visible damage or clogging on the burner surface

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Surface Burner is an OEM part for GE gas ranges. As the critical surface heat is delivered through, it is exposed to extreme temperature variations during cooking.

Symptoms of a bad surface burner include: 

• Deteriorated or cracked porcelain-enamel exterior
• Warped or misshapen burner base that no longer sits flat
• Cookware that rocks or is unstable when placed on the burner 

Causes can be normal wear over many heating and cooling cycles or damage from the continuous use of larger pots that put undue stress on the burner head.

Replacing with this OEM GE part restores a stable, level cooking surface. It is compatible with Hotpoint, RCA, and Kenmore ranges as well as preventing future repairs from minor issues. Install yours today for reliable stove-top performance.
 

Machine screw that secures panels, trim pieces, and brackets on ranges. Replace stripped, damaged, or missing screws to keep components properly fastened.

Fixes electrical shocks or arcing from your range. This grounding harness restores the safe earth ground connection between chassis and outlet. Easy install.

Protective bumper that cushions the burner grate and prevents scratching or denting the cooktop surface. Replace if cracked, worn, or missing.

Cast iron griddle for gas ranges. Sits on top of burner grates for additional cooking surface. Replace if cracked, warped, or rusted. Durable construction.

Replace the vent trim on your gas range. This decorative trim piece surrounds the vent opening and may need replacement if cracked, discolored, or damaged.

This vent trim gasket is a replacement trim seal designed to restore a tight fit between the vent trim and the appliance cabinet, helping prevent drafts and reduce air leakage for better venting performance. What it does

• Seals the gap around the vent trim to reduce air leaks and drafts
• Helps maintain proper airflow by preventing outside air infiltration
• Useful when original gasket is cracked, flattened, or missing
• Restores a finished look by filling uneven gaps around the trim

• One vent trim gasket

• Disconnect power to the appliance before servicing and follow the manufacturer's safety instructions
• Remove the vent trim or surrounding trim pieces carefully to access the gasket area
• Clean mating surfaces of dirt, grease, and old adhesive before installing the new gasket
• Press or align the gasket into place; some applications may use adhesive or fasteners—retain original hardware