Parts for Thermador T36IT71NNP/08: Control Panel Parts

This active carbon filter refreshes the air when your range hood is set to recirculate. Replace a saturated filter to restore effective odor reduction and maintain a more comfortable cooking space. What it does:

• Adsorbs cooking odors in recirculating operation
• Helps maintain fresher indoor air when venting back into the room
• Restores odor-removal performance when the old filter is saturated
• Typical signs it's time to replace: persistent cooking smells or diminished odor reduction

• One activated carbon filter

• Disconnect power to the hood before servicing
• Remove the metal grease filter(s) to access the charcoal filter
• Release the old filter from its clips/bayonet mount and install the new filter in the same orientation until it locks
• Charcoal filters are not washable; replace when saturated

• For hoods configured for recirculation; not used when vented to the outdoors

Removes impurities from your refrigerator's water and ice supply. Replace every 6 months for clean, fresh-tasting water. Verify fit by model number.

Replace damaged or missing insulation panel inside your refrigerator cabinet. Restores thermal control and reduces noise. Use when original is torn or worn.

Fixes ice buildup on evaporator coils and poor cooling. This defrost heater melts frost during the defrost cycle to restore airflow and temperature control.

Fix poor drying or cold water issues with this refrigerator heating element. Restores proper water heating and drying performance. DIY-friendly repair.

Interior light fixture assembly for bottom-mount refrigerators. Mounts inside the fresh food compartment. Replace if cracked, broken, or missing.

Interior light fixture assembly for bottom-mount refrigerators. Installs inside refrigerator compartment. Replace if fixture is cracked, broken, or missing.

Buttons not responding or display not working? This operating control module restores user interface functionality in bottom-mount refrigerators.

The Motor-Fan is an OEM component specifically designed for Bosch refrigerators. It circulates air to optimize internal temperatures.

The motor-fan works continuously to push cool air from the freezer compartment and direct airflow throughout refrigerator shelves and bins. Strategically positioned vents help regulate temperature variances. 

Symptoms of a bad motor-fan include:  

• Inconsistent or fluctuating temps from section to section
• Frost or condensation building up unusually fast 
• Abnormal sounds like grinding or squealing during the operation
• Complete lack of airflow

Causes can be a failed motor bearing, compromised fan blades off balance, or blockage preventing free rotation.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore refrigerator models.
 

Factory mounting housing fixture that secures components inside your refrigerator. Replace if cracked, broken, or missing to restore proper support and alignment.

This is an electrical on/off switch used to control power to an appliance circuit. It replaces a failed switch so controls respond normally and the appliance can be powered on and off safely. What it does

• Opens and closes an electrical circuit to enable or disable appliance power or a specific control function
• Commonly replaces a worn, stuck, or unresponsive switch that prevents controls or lights from operating
• Can resolve symptoms like no power to a control, intermittent operation, or a button that won't actuate
• Designed to mate with the appliance's existing wiring and mounting points

• One electrical on/off switch

• Disconnect power to the appliance at the breaker or unplug before working on wiring
• Verify proper wire locations and secure all terminal connections; replace only with the exact part specified by the manufacturer
• Handle the part carefully to avoid bending terminals or damaging the switch actuator

This halogen light bulb restores bright, reliable illumination in your appliance so you can clearly see the cooking area or interior. Replace a burned-out or flickering bulb to maintain visibility and safe operation. What it does:

• Provides illumination inside the appliance or over the cooking surface
• Replaces a failed halogen lamp to restore proper lighting
• Typical symptoms: light won't turn on, is dim or flickers, or works intermittently
• Helps you monitor food and check progress without guesswork

• 1 halogen lamp

• Disconnect power/unplug and allow the bulb and surrounding area to cool completely before service
• Access the lamp per your model's instructions; remove any lens or cover carefully
• Handle the new halogen bulb with gloves or a clean cloth; avoid touching the glass capsule
• Match the bulb type and rating specified for your model; do not exceed the rated wattage

Replaces a missing, worn, or broken control panel push button on your refrigerator. Restores clean, reliable activation of panel functions.

Control button not responding or missing? This push button restores tactile control on your refrigerator panel. Simple snap-in installation takes minutes.

Protective cover panel for refrigerators. Shields internal components and wiring while maintaining proper airflow. Replace if cracked, broken, or missing.

This is a replacement micro switch used in select Bosch-built appliances. It opens and closes an electrical circuit when actuated by a lever or cam, enabling functions like starting/stopping a cycle or detecting a position.

• Controls power or signals by opening/closing a low-voltage circuit when pressed
• Commonly used for on/off, door/lid, or position-sensing functions
• Failure may cause the unit not to start, intermittent operation, or features that won't engage
• May also present as unresponsive buttons or functions that only work when pressed a certain way

• Disconnect power before servicing; verify no voltage is present
• Access location varies by model; remove panels as needed to reach the switch
• Note wire positions and terminal orientation before removal
• Test continuity with a meter after installation to ensure proper operation

This temperature limiter safeguards the evaporator defrost heater by opening the circuit if temperatures rise too high. Replacing a failed limiter restores defrost safety and helps prevent frost buildup and inconsistent cooling performance.

• Protects the defrost circuit by cutting power to the evaporator heater when an over-temperature condition is detected
• An open/failed limiter prevents the heater from energizing, causing frost accumulation on the evaporator and warm refrigerator temps
• Designed to be installed in the original location and orientation for accurate temperature sensing

• Disconnect power before servicing; evaporator fins and sheet metal are sharp—use cut-resistant gloves
• Access the evaporator compartment and note the limiter's original mounting and wire routing before removal
• Transfer any clips/insulation sleeves and reconnect wiring to the same terminals; do not bypass this safety device
• Reassemble, restore power, and monitor for normal defrost operation

This active carbon filter refreshes the air when your range hood is set to recirculate. Replace a saturated filter to restore effective odor reduction and maintain a more comfortable cooking space. What it does:

• Adsorbs cooking odors in recirculating operation
• Helps maintain fresher indoor air when venting back into the room
• Restores odor-removal performance when the old filter is saturated
• Typical signs it's time to replace: persistent cooking smells or diminished odor reduction

• One activated carbon filter

• Disconnect power to the hood before servicing
• Remove the metal grease filter(s) to access the charcoal filter
• Release the old filter from its clips/bayonet mount and install the new filter in the same orientation until it locks
• Charcoal filters are not washable; replace when saturated

• For hoods configured for recirculation; not used when vented to the outdoors

This sensor monitors operating conditions inside the appliance and reports to the control so cycles run correctly and safely. When the sensor fails, the control may receive inaccurate feedback, leading to irregular performance. What it does:

• Detects key conditions inside the appliance and sends a signal to the control
• Helps the control regulate heat and cycle progress
• Failure symptoms can include erratic cycle times, poor heating performance, or sensor-related error messages
• Can prevent the appliance from starting or completing a cycle if readings are out of range

• 1 sensor

• Disconnect power before servicing; shut off water supply if applicable
• Access the sensor and note wire orientation before removal
• Ensure any sealing surface is clean and the sensor is seated properly; check for leaks after reassembly where applicable
• Run a diagnostic or test cycle after installation to clear errors and verify operation

Refrigerator not cooling properly or running constantly? The temperature sensor monitors internal temps and signals the control board. DIY-friendly repair.

Fix ice buildup or cooling issues with this refrigerator evaporator coil. Resolves uneven temperatures and frost accumulation in freezer compartments.

Mounting screw for bottom-mount and upright refrigerators and freezers. Secures internal components and panels. Replace if stripped, missing, or damaged.

Mounting screw for refrigerators and freezers. Secures internal components and panels. Replace if stripped, missing, or corroded during repairs.

This fixture is a small mounting bracket that secures internal dishwasher components to the tub, helping maintain proper alignment and reduce vibration. Replaces worn or broken brackets to restore stable operation and prevent rattling or misalignment. What it does:

• Secures internal parts and assemblies to the dishwasher tub or frame
• Keeps components aligned to prevent rubbing, noise, or premature wear
• Helps maintain proper clearance for moving parts like racks or spray arms
• Can prevent intermittent contact that might cause rattles or vibration

• Disconnect power and water supply before starting any service
• Inspect surrounding clips and fasteners; replace any damaged hardware for a secure fit
• Typically installs with basic hand tools; follow OEM instructions for correct placement