Parts for Maytag MHW5100DW0: 04 - Control Panel Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

White console assembly for front-load washers. Houses control panel and display. Replace if cracked, damaged, or discolored to restore appearance.

Chrome Shadow control panel assembly for your washer. Replaces cracked, damaged, or faded console housing. Includes mounting points for controls and display.

Color: Chrome Shadow

The Panel Control is an OEM component specifically designed for Whirlpool brand front-load washing machines. This part houses the control buttons and display panel that allow users to select wash cycles and operate the washer. 

Causes of a bad panel control can include water damage causing electrical issues, scratches or cracks affecting visibility or usability of controls, or failure of electronic components responsible for operating the washer functions.  

Symptoms of a bad panel control include: 

• Unresponsive or non-functioning buttons  
• Difficulty selecting wash cycles
• Errors or failure to start wash cycles
• Flickering or unlit display

Color: White

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Mounting screw for microwaves, dryers, wall ovens, washers, and laundry centers. Replaces lost, stripped, or damaged screws during installation or repair.

The electronic control board is the dishwasher's control center, coordinating cycle timing and powering wash, drain, and dry components. Replacing a failed board restores normal operation and responsive controls. What it does:

• Directs power to the circulation pump, drain pump, water inlet valve, heater, and other loads as programmed
• Interprets inputs from sensors and the user interface to run the selected cycle
• Manages cycle timing and safety interlocks
• Failure symptoms include won't start, unresponsive controls, stops mid-cycle, error codes, or intermittent/erratic operation

What's included:

• 1 electronic control board

Install notes:

• Disconnect power at the breaker before servicing; verify no voltage is present
• Handle the board using ESD precautions; avoid touching circuitry
• Transfer all connectors and mounting hardware; seat plugs fully and secure any locks
• After install, restore power and run the model's diagnostic/configuration steps per the unit's tech sheet if required

This control knob attaches to the appliance's control shaft so you can select settings with a solid, positive feel. Replace a cracked, stripped, or missing knob to restore smooth operation and a clean, finished look.

• Attaches to a switch or valve shaft to select temperatures, burner levels, or cycles
• Transfers your hand turn to the control shaft for accurate setting changes
• Common symptoms: cracked hub, spins without engaging, wobbly/loose, falls off, or missing
• Helps maintain a uniform appearance across the control panel

• Disconnect power (and shut off gas, if applicable) before servicing
• Pull the old knob straight off the shaft; avoid prying against the control panel
• Align the insert with the shaft's flats or splines and press straight on until fully seated
• Match position- and finish-specific knobs to the original on models that use different knobs per location

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

If your washer won't power on or controls aren't responding, the main wire harness may be faulty. This connector restores electrical continuity.

Replacement mounting bracket for washer models. Secures internal components in proper position. Order new bracket if original is cracked, bent, or broken.

This is a replacement screw designed to work with a wide range of household appliances. It is used for many purposes in these appliances, from holding body panels together to securing electronics into control boards. However, screws are subject to damage through corrosion, impact, and improper installation/removal. In most cases, the primary damage to this screw is through corrosion – it may become rusted or corroded in place, depending on the appliance and the maintenance provided during its lifespan. The screw may also be stripped or rounded due to improper removal or installation. If the screw is damaged, lost, or corroded in place, it will need to be replaced. In most cases, removal will require nothing more than a Phillips head screwdriver or the appropriately sized socket with a ratchet. However, if the screw is damaged, it may require a tap set to remove it from its mounting location. Note that this is a genuine OEM replacement screw made from durable, high-quality metal, and is sold individually. It fits Whirlpool, Maytag, Roper, Estate, Amana, Crosley, and Thermador appliances. It is used in over 150 machines, ranging from washers and dryers to air conditioners.

Washer stops mid-cycle or won't power on? A faulty wire harness disrupts electrical connections. This harness restores power flow for reliable operation.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.