Parts for Frigidaire FRSS2333AS5: Controls Parts

Refrigerator making loud noises or not cooling? A worn evaporator fan blade often causes these issues. DIY-friendly repair typically takes 30 minutes.

Isolates the evaporator fan motor from its bracket to reduce vibration and noise. Replace if worn, cracked, or missing to keep the motor secure.

Fix loud grinding or squealing from your fridge with this evaporator fan motor. Restores proper air circulation in freezer and fresh food sections.

Nylon washer for the evaporator fan motor shaft in refrigerators. Replace if worn, cracked, or missing to ensure proper fan alignment and operation.

Refrigerator not cooling but freezer works? Broken evaporator fan blade stops cold air circulation. Easy DIY fix in under an hour with basic tools.

The Wire Harness is an OEM part for Frigidaire refrigerators. It connects various electrical components within the refrigerator, ensuring proper communication and voltage.

A bad wire harness can be caused by wear and tear, damage, or electrical issues. When the harness becomes faulty, it can result in issues such as intermittent or complete loss of power, malfunctioning controls, or improper functioning of the refrigerator's features.

Symptoms of a bad wire harness include:

• Loss of power to the refrigerator or specific components
• Inconsistent or erratic operation of controls or displays
• Malfunctioning lights, fans, or other electrical features

Replace your faulty wire harness with this genuine OEM part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Thermistor Kit is an OEM part for Frigidaire refrigerators. Consisting of a thermistor temperature sensor and mounting bracket, this kit plays a key role in refrigeration system operation. Strategically positioned inside the unit, the sensor continually monitors interior temperatures to maintain proper cooling levels throughout all compartments. 

Symptoms of a bad thermistor kit include:

• Fluctuating or uncontrollable temperatures within sections of the fridge
• The condenser or evaporator fans running excessively long periods  
• Ice buildup inside compartments disrupting temperature regulation

Causes can involve thermistor degradation over time losing sensitivity and providing inaccurate reads to system computers.  

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Structural mounting base that secures components in your side-by-side refrigerator. Replace if cracked, broken, or missing to restore proper alignment.

Plastic cover for side-by-side refrigerators. Replaces cracked, broken, or missing covers. Restores clean appearance and protects internal parts.

Directs water flow to your refrigerator's filter housing for filtered water to the dispenser and ice maker. Replace if leaking or damaged. Verify fit.

Replace your refrigerator's ice and water filter housing assembly when cracked or damaged. Restores proper fit and protects internal components. Verify compatibility with your model number before ordering.

Machine screw secures panels, trim, and internal brackets in your refrigerator. Replace worn, stripped, or missing fasteners to keep components aligned.

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head

Replacement screw for refrigerator panels, brackets, and covers. Secures interior and exterior components. Needed when original is missing, stripped, or corroded.

Replaces worn, damaged, or missing cabinet liner insulation panel in your side-by-side refrigerator. Installs inside the cabinet to reduce heat transfer.

Fix a fridge that's freezing food or not cooling properly. This air damper controls cold airflow between compartments. Moderate DIY repair for most models.

Seals the air damper opening to maintain proper airflow between compartments. Replace if torn or compressed to fix uneven cooling and drafts.

Replacement housing cover for side-by-side refrigerators. Shields internal components and restores a clean exterior. Replaces cracked or missing covers.

Reduces contaminants for clean, fresh-tasting water and ice. Replace every 6 months or when flow slows. Verify filter compatibility with your model.

Evaporator fan shroud for side-by-side refrigerators. Covers and protects the fan assembly. Replace if cracked, broken, or missing to restore proper airflow.

Replace your refrigerator's water filter housing to restore proper filtration and water flow. Ensures secure filter fit and prevents leaks. Confirm compatibility with your model number before ordering.

This replacement water tube routes water between the supply and the dispenser/valve assembly, restoring proper water flow and helping stop leaks or weak/slow dispensing. Durable tube in the manufacturer color for correct fit. What it does:

• Carries refrigerator water from the inlet to the valve/dispenser assembly
• Restores normal water flow when original tubing is cracked, split, or clogged
• Helps stop leaks and prevents water from pooling inside the cabinet
• Matches the OEM routing and connection style for straightforward replacement

• One replacement water tube (87.6" length, brown/tan, valve-end style)

• Disconnect power and shut off the water supply before starting any work
• Handle tubing and fittings gently to avoid kinks or damage during installation
• Confirm routing and connections match the original tube before trimming or fastening

Water line tube for side-by-side refrigerators. Connects water supply components inside the unit. Replace if cracked, leaking, or damaged.

Small retainer clip that secures components, panels, tubes, or wires in place inside your refrigerator. Replace when worn, broken, or missing to restore fit.