Parts for Electrolux E36GC76PRS1: 02 - Cook Top Parts

Secures the ignitor assembly to your gas cooktop burner base. Replace if screw head is stripped, threads damaged, or screw is missing after disassembly.

Nameplate label for refrigerators. Attaches to the exterior or interior panel. Replace if the original is faded, peeling, damaged, or missing.

This front control panel provides the user interface and protective cover for the appliance's electronic controls, restoring a clean, functional console and improving button visibility and operation. What it does:

• Covers and protects the control board and buttons from spills, dust, and wear
• Provides the visible button/label surface users press to operate the appliance
• Replaces cracked, warped, or heavily scratched panels that interfere with use
• Helps restore proper button alignment and tactile feedback when damaged

• Disconnect power to the appliance before beginning any repair
• Removal/installation typically requires removing trim screws and gently lifting the old panel away from the console
• Handle the panel carefully to avoid scratching or cracking during installation
• Test the controls after reassembly to ensure proper operation before finalizing installation

Replacement gas cooktop grate that supports cookware above burners. Installs over burner area. Replace if cracked, broken, warped, or missing.

Burner skirt for gas cooktops. Fits around the burner base to provide a finished appearance. Replace if cracked, discolored, or missing.

This insulating cap protects compressor electrical terminals by covering the connection area to help prevent shorts and moisture intrusion. It's a simple replacement that restores proper terminal insulation and safety. What it does

• Covers compressor terminal studs to reduce risk of electrical shorting and arcing
• Helps shield terminals from dust, debris and incidental moisture
• Maintains safe separation between wiring and metal chassis
• Can stop intermittent electrical contact that causes compressor cycling issues

• One insulating cap for compressor terminal protection

• Disconnect power before servicing the appliance to avoid shock or injury
• Remove old cap by gently pulling away from terminal studs; press new cap fully into place
• Inspect terminal connections and wiring for damage; replace any corroded or frayed components

The Range Cap is an OEM part for Frigidaire ranges. It seals the upper combustion chamber to contain heat from the oven burners. A tight-fitting cap is critical for efficient, safe oven performance.  This cap measures 3 inches in diameter.

Causes of a bad cap can include cracks, warping, or collapsed seals from prolonged exposure to high oven temperatures. Accidental damage during past maintenance is also possible.

Symptoms of a bad cap include:

• Escaping heat from the oven chamber, reducing efficiency
• Flames or sparks visible around the cap during baking
• Loose, wobbly, or missing cap allowing grease and debris in the combustion area

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Replacement burner cap for gas ranges and cooktops. Covers the burner head and protects from spills. Needed when cap is cracked, broken, or missing.

Replacement burner cap for gas range cooktops. Sits atop the burner head to distribute flame evenly. Replace if cracked, damaged, or missing after moves.

Replacement gasket that seals around surface burners to prevent spills from entering the cooktop cavity. Replace when hardened, cracked, or torn. Confirm fit with your model number before ordering.

Seals the gap between burner and cooktop to prevent spills from leaking underneath. Replace when seal becomes discolored, cracked, or loses flexibility.

Seals between burner and cooktop to prevent spills and air leaks. Replace when cracked, hardened, or crumbling. Confirm fit with your model number.

Strain relief retainer secures electrical cables at the cooktop connection point. Replace if cracked, broken, or missing to protect wiring integrity.

Replacement control knob for gas cooktops and ranges. Mounts to the valve stem to control burner settings. Replace if cracked, broken, or stripped.

Flat cooking griddle for gas cooktops. Replace your griddle if it's warped, cracked, or damaged from heavy use. Installs on cooktop surface.

Decorative skirt ring that fits around cooktop control knobs. Replace if cracked, discolored, or missing to restore the finished appearance of your range.

Power cord for gas cooktops. Connects the appliance to your electrical outlet. Replace if the cord is frayed, damaged, or missing for safe operation.

This control panel is the replacement user interface cover that houses the appliance controls and display, restoring a clean, functional front surface and protecting the underlying electronics from damage. What it does

• Provides the visible control surface and button area for user operation
• Protects internal control boards and wiring from spills, dust, and impact
• Restores proper fit and appearance when the original panel is cracked or damaged
• Can resolve symptoms such as unresponsive buttons, missing/obscured indicators, or loose trim around the controls

• One control panel

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Handle panel edges carefully; some panels have sharp edges or fragile clips
• Installation typically requires removing trim/screws and carefully disconnecting/reconnecting any button membranes or display assemblies

This replacement door gasket creates a tight seal around the refrigerator or freezer door to help maintain interior temperature and reduce energy loss. It restores proper door closure for better cooling and frost prevention. What it does:

• Seals the door perimeter to keep cold air in and warm air out
• Helps maintain consistent internal temperatures for food safety
• Reduces frost build-up and compressor runtime due to air leaks
• Restores proper door alignment and closing performance

• Remove old gasket and clean the door mating surface before installing the new gasket
• Start installation at a corner and work around the door to ensure an even fit
• Gasket may be warmed slightly (hot water or hair dryer on low, if needed) to improve flexibility for positioning
• Unplug or disconnect power to the appliance before beginning work

Replace your damaged or missing cooktop ring. This part sits around the burner assembly to provide a finished look and structural support. Order now.

Regulates low heat for gentle simmering on gas burners. Replace if warped, damaged, or causing uneven flame distribution. Verify fit with your model.

Specially formulated cleaner for ceramic glass and smooth cooktops. Removes cooked-on food, grease, and spills without scratching. Verify fit by model.