Parts for Kitchenaid KECC508RPS01: 01 - Cooktop Parts, Optional Parts (Not Included) Parts

Color: Bisque

Color: Black

The Cooktop is an OEM replacement part for Whirlpool electric cooktops. It serves as the main cooking surface, where the burners or heating elements are located. The cooktop is designed to withstand high temperatures and provide a durable, easy-to-clean surface for all your cooking needs.

Causes of a bad cooktop can range from physical damage due to impact or improper use, to excessive heat exposure or thermal shock. Over time, repeated heating and cooling cycles can also lead to the degradation of the cooktop material or its surface finish.

Symptoms of a bad Cooktop include:

• Visible cracks, chips, or damage to the cooktop surface
• Uneven heating or hot spots on the cooking surface
• Discoloration or warping of the cooktop material
• Difficulty in cleaning or maintaining the cooktop

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore ranges and cooktops. 

Size: 6-32 x 3/8 inch.

Decorative frame top trim for cooktops. Installs around the perimeter of the glass surface. Replace if cracked, chipped, discolored, or missing.

Replacement tension spring for cooktop assemblies. Restores proper tension for moving components. Order when original is stretched, broken, or missing.

The Range Screw is an OEM part for Whirlpool ranges. It is a small but essential component used to secure various parts and panels of the range. It is designed to fit securely into pre-drilled holes, holding components tightly in place.

There are a few factors that can lead to a bad Range Screw. Over time, screws may become loose or stripped due to frequent use or inadequate tightening. Accidental cross-threading or overtightening can also damage the screw or the surrounding components.

Symptoms of a bad screw may include loose or wobbly parts, rattling noises during operation, or difficulty in keeping components securely attached. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Protects cooktop switches from moisture and debris that cause shorting and corrosion. Replace if damaged, missing, or when installing new switches.

Fix unresponsive controls or incorrect heating cycles with this cooktop electronic control board. Restores proper input processing and timing functions.

This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.

• Fastens brackets, panels, trim, or components to the appliance chassis
• Helps correct loose or missing hardware after vibration or service
• Replaces stripped, rusted, or broken screws
• Can reduce rattling noises or misaligned parts caused by missing fasteners

• Disconnect power; for gas appliances, also shut off the gas supply
• Support the part being fastened; start threads by hand to avoid cross-threading
• Use the correct driver size; tighten snugly without overtightening
• Replace hardware with the exact part number to ensure proper fit

Screw for control panel.

Wire harness for cooktops and ranges. Connects electrical components for power distribution. Replace if wires are frayed, damaged, or connectors broken.

This Support is a replacement mounting bracket that helps secure internal components and maintain proper alignment for reliable operation. It restores worn or damaged support points to reduce rattling and misalignment. What it does:

• Provides a secure mounting point for adjacent parts to prevent movement and vibration
• Restores proper alignment where a broken or bent support causes noise or component shift
• Helps maintain component spacing to support normal operation and airflow
• Commonly used when a cracked, bent or missing support is visible during inspection

• One Support mounting bracket

• Disconnect power to the appliance before starting any repair
• Use basic hand tools; retain fasteners and note their location for reassembly
• Inspect surrounding components and replace any damaged clips or screws as needed

Burner not heating or heating unevenly? This surface heating element restores proper cooktop function. Direct-fit replacement, moderate DIY difficulty.

If your cooktop burner won't heat or heats unevenly, this surface heating element restores consistent stovetop cooking. Simple DIY repair in 15 minutes.

If your range has a strong burning smell or won't power on, the terminal block may be heat-damaged. This insulated connector restores safe power flow.

The Range Door Handle Screw is an OEM part compatible with Whirlpool ranges. Over time, the door handle screw may become loose due to frequent use or other external factors. If the screw is damaged or missing, it can lead to a loose or wobbly handle, making it difficult to open and close the range door securely.

Size: 10-16” x 7/8”

Symptoms of a faulty or missing screw may include:

• Loose or wobbly handle
• Difficulty in opening or closing the range door
• Handle coming off from the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore ranges.

Replacement hex nut for dryer terminal blocks and electrical connections. Secures terminal components. Needed when original is stripped, missing, or damaged.

Hardware kit with screws and brackets to secure cooktop components. Replaces worn, missing, or damaged mounting fasteners for proper fit and stability.

Specs: 25ft, 14 Ga. 150 c Brown

Specs: 25 ft, 14 Ga., 150 c Green

Splicing 25 Ft. Black 12 Ga. 150~c (Wire, Orange 14 Ga. 150~c)

Splicing 25 Ft. Black 12 Ga. 150~c (Wire, Red 14 Ga. 150~c)

Splicing 25 Ft. Black 12 Ga. 150~c (Wire, Yellow 14 Ga. 150~c)

Splicing 25 Ft. Black 12 Ga. 150~c (Wire, Red 14 Ga. 200~c)

Size: 25ft, 12 Ga. 150 c Black

Specs: 25ft, 14 Ga. 150 c Black

Specs: 25ft,14 Ga., 200 c Brown

Hardware kit for securing cooktop to countertop. Includes mounting brackets and fasteners. Replace if brackets are bent, screws stripped, or missing.

Size: 10 fl. oz. Used on glass, ceramic and porcelain cooktops.