Parts for Weedeater BC2400-TYPE 5: Crankshaft / Crankcase Parts

Muffler kit for gas line trimmers and edgers. Replaces damaged, rusted, or missing muffler assemblies to restore proper exhaust function.

Secures the muffler in place and reduces vibration on leaf blowers and trimmers. Replace if spring is stretched, broken, or missing for proper exhaust.

Craftsman manufactures this cylinder head bolt that fastens the cylinder of a small gasoline-powered engine to the engine manifold. There are often two head bolts that secure the cylinder. The placement of the bolts is important as it not only fastens the two engine parts together, but holds the cylinder gasket in place, as well. Among the equipment that uses this type of cylinder head bolt are leaf blowers, power vacuums, grass trimmers, edgers, and hedge trimmers. While it is rare for the bolts to fail, the gasket they hold in place can sometimes wear and allow oil to leak outside the engine manifold or into the combustion chamber. This is revealed by white, oily smoke or an abundance of oil on the equipment. When replacing the head gasket, it is a good idea to replace the cylinder head bolts, as well, as they will have received a good deal of wear, potentially weakening them. These bolts are sold separately, so the user should make sure to purchase the correct number of bolts needed. Before beginning, the user should consult diagrams of the internal engine parts and their order. These bolts are OEM genuine replacement parts, built to match the factory originals.

This spark plug is a genuine Husqvarna part, sold individually. This spark plug can be used as a replacement part for tillers, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners.Spark plugs in outdoor appliances such as these might have to be replaced if they are not functioning as usual. If the ignition system is not working, if the spark plugs are not igniting in the first place, or if the spark plugs are igniting but the engine is not powering on, it is likely that the spark plugs are damaged and should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This spark plug is compatible with the following outdoor appliance brands: Husqvarna, Stihl, Craftsman, Weed Eater, Toro, Cub Cadet, Ryobi, Homelite, Poulan, Wheel Horse, Tecumseh, Tanaka, Black Max, and Green Machine.

Repairs worn cylinders in gas trimmers and edgers. Replace when experiencing loss of power, hard starting, or excessive smoke. Verify fit with your model.

This gasket kit features replacement gaskets for use in a range of gas-powered handheld lawn and garden machines. The kit includes a range of O-rings, seals, and gaskets used as a means to provide tight seals between elements of the engine to prevent leaks from air, fuel, oil, and so forth. Even durable gaskets such as those found in engines will start to wear down over time. They can start to crack and break, and sometimes they will shrink. When this happens, they no longer provide a tight seal and will need to be replaced. It is recommended that the gaskets and seals are replaced whenever the owner is servicing their small engine. This will ensure a proper seal when the engine is reassembled. This gasket kit has genuine OEM parts to ensure a proper fit and a tight seal. The kit is sold individually and works with many models of string trimmer and edger. Compatible brands include Craftsman, Husqvarna, Weed Eater, and Poulan.

Carburetor adaptor mounting screw for trimmers and outdoor power equipment. Replace if stripped, missing, or damaged to secure carb adaptor properly.

This gasket kit features replacement gaskets for use in a range of gas-powered handheld lawn and garden machines. The kit includes a range of O-rings, seals, and gaskets used as a means to provide tight seals between elements of the engine to prevent leaks from air, fuel, oil, and so forth. Even durable gaskets such as those found in engines will start to wear down over time. They can start to crack and break, and sometimes they will shrink. When this happens, they no longer provide a tight seal and will need to be replaced. It is recommended that the gaskets and seals are replaced whenever the owner is servicing their small engine. This will ensure a proper seal when the engine is reassembled. This gasket kit has genuine OEM parts to ensure a proper fit and a tight seal. The kit is sold individually and works with many models of string trimmer and edger. Compatible brands include Craftsman, Husqvarna, Weed Eater, and Poulan.

Engine won't start, stalls, or runs rough? This gas line trimmer carburetor controls the fuel-air mixture for proper engine performance. Moderate DIY.

Engine won't start, stalls, or runs rough? This gas line trimmer carburetor controls the fuel-air mixture for proper engine performance. Moderate DIY.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. This type of part is very common in different types of appliances. Screws hold different parts together.A new screw might be needed if the user notices that different parts are loose or missing. It is possible for screws to become stripped over time and will need to be replaced. The repair for this screw should be fairly simple and will require a screwdriver and perhaps pliers if the previous screw is stuck in place. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use.

Primer bulb helps start your edger by pushing fuel into the carburetor. Replace if cracked, hard, or not pumping fuel properly. Verify fit with your model.

Air filter foam catches dirt and debris before entering your edger's engine. Replace when foam becomes clogged or damaged. Check your model for fit.

Replacement mounting screw for chainsaws and outdoor power equipment. Secures components and covers. Replace if stripped, missing, or damaged during repair.

Choke spacer for grass line trimmers and other outdoor power equipment. Replaces cracked, broken, or missing spacers in the carburetor choke assembly.

Wave washer for lawn and garden equipment. Replace when worn or damaged to maintain proper tension and spacing. Verify fit with your model number.

Engine piston kit for gas trimmers and outdoor equipment. Replaces worn, damaged, or corroded pistons that cause poor compression and engine performance.

Piston ring seals the space between piston and cylinder wall in gas-powered outdoor power equipment engines. Replace if worn, cracked, or causing smoke.

Fix a loose or rattling piston with this wrist pin retainer. Secures the piston pin in trimmers, blowers, and hedge trimmers. Basic hand tools needed.

This is a connecting rod assembly used in many types of lawn and garden equipment. It is made of durable metal and connects the engine crankshaft to the piston. The connection rod assembly is also tasked with transferring power to the crankshaft from the piston. This is an important component that is required for the proper functioning of an internal combustion engine.If the connecting rod assembly has gone bad, it can cause knocking sounds from the engine, low oil flow and pressure, and excessive oil consumption. In some cases, a broken connecting rod assembly will also result in an overheating engine. If the connecting rod assembly has gone bad, a wrench and screwdriver will be needed to replace it. Make sure to wear work gloves, disconnect the spark plug wire, and let the engine cool before working on the part.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The connecting rod assembly is designed for use with string trimmers, hedge trimmers, leaf blowers, edgers, and pole prunes manufactured by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.

This gasket kit features replacement gaskets for use in a range of gas-powered handheld lawn and garden machines. The kit includes a range of O-rings, seals, and gaskets used as a means to provide tight seals between elements of the engine to prevent leaks from air, fuel, oil, and so forth. Even durable gaskets such as those found in engines will start to wear down over time. They can start to crack and break, and sometimes they will shrink. When this happens, they no longer provide a tight seal and will need to be replaced. It is recommended that the gaskets and seals are replaced whenever the owner is servicing their small engine. This will ensure a proper seal when the engine is reassembled. This gasket kit has genuine OEM parts to ensure a proper fit and a tight seal. The kit is sold individually and works with many models of string trimmer and edger. Compatible brands include Craftsman, Husqvarna, Weed Eater, and Poulan.

This replacement part is an ignition spacer. This is a genuine replacement part made by Husqvarna. This part is able to allow for space around the ignition so that it is able to function properly during use. A new ignition spacer might be needed if the machine is unable to turn off or on. If the spacer is damaged or stripped down in any way, it is also recommended that it be replaced. This can affect the overall functioning of the machine. Be sure that the engine is completely turned off before attempting to replace this part. Refer to the appropriate user guide for more information on how to complete this repair. This part is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

The ignition module, also called an armature magneto or a magneto charger, is an integral part of handheld gasoline lawn and landscape tools like grass trimmers, leaf blowers, power vacuums, hedge trimmers, and edgers. The ignition module provides a high voltage jolt to the spark plug of a handheld tool when a pull cord is yanked. This in turn fires the fuel/air mixture in the carburetor, bringing the engine to life. Typically, the ignition module is durable and can last as long as the effective life of the tool. Sometimes, however, heavy usage can result in the magneto not being able to deliver the necessary voltage to the spark plug. When repeated pulling of the starter rope yields no sign of combustion, often the culprit is a faulty ignition module. Because this part is used on so many different types of equipment, it is impossible to give simple replacement instructions. It should be noted, however, that the part is easily located since one end of the ignition modules is the spark plug cap. Be sure to replace this part with one like this, which is a genuine OEM replacement part, manufactured to replicate the original part exactly. This ignition module is compatible with device sold by Husqvarna, Jonsered, Weed Eater, Paramount, and Poulan.

Engine won't start or rope pulls out completely? This starter rope kit wraps around the recoil pulley to engage the engine. Simple DIY fix, 3 feet long.

Replacement mounting screw for brush cutters, chainsaws, trimmers, and blowers. Replaces lost, stripped, or broken screws during repairs or maintenance.

Retaining ring fastener for brush cutters and trimmers. Holds components securely together. Replace if cracked, worn, or missing for proper assembly.

Crankshaft outer bearing creates a flexible joint for moving components. Replace when you notice excessive vibration or noise during operation. Verify fit with your equipment's model number before ordering.

Seals the crankshaft area to prevent oil leaks in line trimmers and edgers. Replace if you notice oil seepage or engine performance issues.

Bearing facilitates smooth rotation in outdoor power equipment. Replace when you notice grinding noise, vibration, or rough operation. Verify fit.

Replace your cracked or broken string trimmer fan shroud. This protective housing covers the cooling fan and directs airflow through the engine compartment.

Replacement mounting screw for outdoor power equipment. Secures various components and reduces vibration. Order when screws are stripped, lost, or damaged.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

This gasket kit features replacement gaskets for use in a range of gas-powered handheld lawn and garden machines. The kit includes a range of O-rings, seals, and gaskets used as a means to provide tight seals between elements of the engine to prevent leaks from air, fuel, oil, and so forth. Even durable gaskets such as those found in engines will start to wear down over time. They can start to crack and break, and sometimes they will shrink. When this happens, they no longer provide a tight seal and will need to be replaced. It is recommended that the gaskets and seals are replaced whenever the owner is servicing their small engine. This will ensure a proper seal when the engine is reassembled. This gasket kit has genuine OEM parts to ensure a proper fit and a tight seal. The kit is sold individually and works with many models of string trimmer and edger. Compatible brands include Craftsman, Husqvarna, Weed Eater, and Poulan.

Heavy metal flywheel assembly connects to the rotating shaft to regulate power delivery from the motor. Replace if cracked, damaged, or worn from use.

Tapping screw for outdoor power equipment engines. Replaces missing, stripped, or damaged mounting screws. Consult your parts diagram for location.

This retainer is a genuine Husqvarna part, sold individually. This retainer can be used as a replacement part in a string trimmer or a leaf blower. The purpose of the retainer in a string trimmer or a leaf blower is to secure the recoil starter pulley while the appliance is in use. The retainer in a string trimmer or a leaf blower might have to be replaced if it can no longer secure the recoil starter pulley. If damaged, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This retainer is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Weed Eater, Paramount, and Turf King.

String trimmer won't start or rope won't retract? This starter pulley keeps the starter rope aligned for reliable engine starting. Simple DIY fix.

This starter spring will put tension on the starter pulley, which will then retract the starter assembly on a range of lawn and garden equipment. It engages the drive cup on the flywheel to start the engine when it is pulled. The starter spring is made from durable metal, but it may need to be replaced if it fails. It could become damaged or corroded, or it may have simply worn down over time and a lot of usage. A problematic starter spring will mean that the starter cord does not recoil properly after being pulled. It can make starting the engine difficult at best, and impossible at worst. In these cases, a replacement becomes necessary. The authentic OEM replacement starter spring is sold individually. It can be used with string trimmers, leaf blowers, and hedge trimmers. It is compatible with Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater brands. Buyers must always make sure they are choosing the correct option for their make and model.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

Flat washer for trimmers, blowers, and hedge trimmers. Replaces worn, missing, or damaged washers. Essential hardware for secure assembly and fit.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Screws are small yet very important to the overall operations of many different machines and appliances. Screws are able to hold other parts in place and secure so that everything can operate smoothly. A new screw might be needed if the user notices that the current ones are damaged or missing. It is possible that screws become stripped or lodged over time and must be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous screw is stuck. Be sure the engine is completely powered down before starting a repair. This screw is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

Fix clutch slipping or poor engagement with this friction washer. Creates proper clutch fit for consistent power transfer in chainsaws and trimmers.

This gasket kit features replacement gaskets for use in a range of gas-powered handheld lawn and garden machines. The kit includes a range of O-rings, seals, and gaskets used as a means to provide tight seals between elements of the engine to prevent leaks from air, fuel, oil, and so forth. Even durable gaskets such as those found in engines will start to wear down over time. They can start to crack and break, and sometimes they will shrink. When this happens, they no longer provide a tight seal and will need to be replaced. It is recommended that the gaskets and seals are replaced whenever the owner is servicing their small engine. This will ensure a proper seal when the engine is reassembled. This gasket kit has genuine OEM parts to ensure a proper fit and a tight seal. The kit is sold individually and works with many models of string trimmer and edger. Compatible brands include Craftsman, Husqvarna, Weed Eater, and Poulan.

This retainer is a genuine Husqvarna part, sold individually. This retainer can be used as a replacement part in a string trimmer. The purpose of the retainer in a string trimmer is to affix the fuel tank to the fuel line so that the fuel for the appliance can be directed through the proper passageway and be delivered into the tank.The retainer in a string trimmer might need to be replaced if it is damaged to the point that it loosens from its spot or cannot maintain its placement. If this occurs, the fuel might not be able to be effectively delivered to the fuel tank, in which case the appliance might not function as usual. If the retainer is damaged or compromised, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This retainer is compatible with the following outdoor appliance brands: Husqvarna, Weed Eater, Craftsman, and Poulan.

Seals the fuel tank with an airtight fit to prevent spills during operation. Replace if cracked, loose, or leaking. Verify fit with your model number.

Fuel pickup filter draws gas from tank to carburetor. Replace if engine won't start or runs poorly due to clogged filter. Verify fit with your model number.

The Fuel Line is an OEM replacement part for Husqvarna outdoor power equipment, such as chainsaws, trimmers, and blowers. This component is essential for transporting fuel from the tank to the carburetor, ensuring that the engine receives a steady supply of fuel for optimal performance.

Causes of a bad fuel line can include regular wear and tear, exposure to fuel and environmental elements, or physical damage from mishandling or improper storage. Over time, the fuel line can become brittle, crack, or clog, hindering fuel flow.

Symptoms of a bad Fuel Line include:

• The engine failing to start or running inconsistently
• Visible cracks or leaks in the fuel line
• Fuel odor or visible fuel leaks around the equipment
• Reduced engine performance or stalling during operation

This OEM Husqvarna part ensures reliable operation and is compatible with various models of Husqvarna equipment.