Dixon Parts

Replacement screw for riding mowers and tractors. Used throughout the machine for securing components. Replace if lost, stripped, or damaged from wear.

This nut is a genuine Husqvarna part, sold individually. This nut can be used as a replacement part in a lawn mower or an edger. The purpose of a nut in a lawn mower or an edger is to secure one or more components to a certain spot within the internal machinery of the appliance in conjunction with a bolt.A nut could be easily lost or misplaced as it is a very small component that can fall off or disappear from its area of placement; if this occurs, the nut should be replaced by this genuine OEM replacement part. The nut could also suffer from puncturing, denting, cracking, chipping, warping, or eroding that can mandate its removal and replacement.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Dixon.

Complete tire and wheel assembly for riding mowers. Includes rubber tire and metal rim. Replace when tire is punctured, cracked, or rim is bent or damaged.

This wheel spacer will work with select lawn tractor models. Some lawn tractor owners may want to consider adding wheel spacers to the rear of tires on their tractor. The spacers can help to provide more stability, which can be beneficial for going over various types of terrain and grades. They are a simple addition to make.Those who are considering adding spacers will find that they are easy to add. They will need to have a safe and stable area to remove the tires and add the spacers. Those who have old spacers on their tractor may want to check on them occasionally. They are made from metal and are durable. However, over time, they could start to corrode and need a replacement.These wheel spacers will work with several tractor models from Husqvarna. The spacers are sold individually. Owners will likely need to buy several. These are genuine OEM replacement parts that have been sourced from the manufacturer.

Replace your riding mower's exhaust tube muffler if cracked, rusted, or leaking. This component directs hot exhaust gases away from the engine safely.

This exhaust pipe is a genuine Husqvarna part, sold individually. This exhaust pipe can be used as a replacement part in a lawn mower. The purpose of the exhaust pipe in a lawn mower is to redirect gases and combustion away from the appliance and from the operator.The exhaust pipe in a lawn mower might have to be replaced if it or any component near it shows signs of damage. Signs of damage to the exhaust pipe can include increased or unusual noise coming from the exhaust, reduced fuel economy, strong gasoline odor, hard starting or misfiring engine, or a burning smell from the exhaust. If any of these signs of damage occur, the exhaust pipe should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement sourced directly from the manufacturer. It is sold individually. This exhaust pipe is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

Main body chassis frame for riding lawn tractors. Replace if cracked, bent, or structurally compromised. Central frame that supports engine and components.

The starter solenoid, also called a starter relay, is a low-amperage relay that completes the high-amperage connection between the starter motor and the battery when the ignition key is turned. The starter solenoid is needed to engage the starter motor. When the ignition is turned on, the battery sends a small electrical charge to the starter solenoid. The solenoid shuts a switch, so a more significant amount of current is sent to the starter motor. The starter motor shaft starts to rotate and engage the teeth of the flywheel. The flywheel then turns the crankshaft to put the engine in motion. A bad solenoid can deny the flow of electricity to the starter motor and prevent engine startup. However, other underlying problems may also exist. The battery may be in good condition, but the engine is not cranking, or clicking and grinding noises may come from the solenoid. These are signs that the starter solenoid should be replaced. This starter solenoid is for use in riding lawn tractors and zero-turn riding mowers. It is compatible with specific models from different brands, including Ariens, Craftsman, Dixon, Husqvarna, Hyper Tough, Jonsered, Murray, Poulan Pro, Redmax, and Snapper. It is a genuine OEM replacement part sourced directly from the manufacturer and is sold individually.

Mower blades won't engage or disengage? This PTO switch controls blade engagement from your console. Direct replacement restores safe cutting control.

If your riding mower is leaking fluid or has dirt in the transaxle, the vent valve may be faulty. This valve releases pressure and keeps contaminants out.

If your riding mower won't move or struggles in freewheel mode, the bypass lever may be damaged. Connects the control rod to the transaxle for proper function.

Seals the transaxle magnet cap on riding mowers and lawn tractors. Replace if oil leaks or seal is cracked. Verify fit with your model number.

Riding mower tractor seal prevents fluid leaks and protects internal components. Replace if you notice leaking or loss of pressure. Verify fit with your model number before ordering.

This part is a replacement washer. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, defective, or misplaced washer on outdoor power equipment. This washer is a wave washer and is a standard piece of hardware. A washer allows a screw or bolt to secure equipment more effectively, as it provides a larger bearing surface. Washers can easily become worn, corroded, or lost and may require replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this washer, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this washer is suitable for use on several models of small engine outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This replacement part is an idler arm and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Idler arms are present in many different types of equipment that require steering. Idler arms are able to control and provide support to the pivoting mechanisms inside the appliance.A new idler arm might be needed if the user is not able to steer or turn properly or smoothly. It is common that idler arms become stripped overtime due to normal wear and tear. Without the idler arm working properly the user might not be able to turn or steer the machine at all. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

Flange nut for lawn tractors and riding mowers. Secures components throughout the machine. Replace if stripped, corroded, or missing during repairs.