Parts for Bosch B22CS30SNS/02: Door 1 Parts

Removes impurities from your refrigerator's water and ice supply. Replace every 6 months for clean, fresh-tasting water. Verify fit by model number.

Replace your refrigerator's cracked or broken storage tray. This shelf component organizes items and fits into designated slots inside your fridge.

Storage tray for refrigerator interior. Installs on shelves or in compartments. Replace if cracked, broken, warped, or missing to restore organization.

Replace your refrigerator's cracked, broken, or missing shelf tray. This tray sits inside the door or interior compartment for organized storage.

Replacement outer door panel for your refrigerator. Restores appearance when original is dented, scratched, or cosmetically worn. Installs on door exterior.

This replacement door seal fits into the groove around the dishwasher opening. It compresses against the door to create a watertight barrier, helping stop front leaks and restore a proper, snug close. What it does:

• Forms a continuous seal to keep wash water inside during all cycles
• Helps the door latch compress correctly for a tight, secure close
• Replaces cracked, flattened, or torn gasket that can drip at corners or along the bottom
• Helps resolve: water on the floor at the front, moisture or steam escaping, door harder to close

• Includes 1 door seal

• Disconnect power and shut off the water supply before servicing
• Pull the old seal straight out of the channel; clean the groove of debris and residue
• Start at the top center; press the new seal evenly into the channel without stretching, ensuring corners are fully seated
• Close and reopen the door to seat the seal; run a short cycle and check for leaks

Access panel cover for refrigerators. Protects internal components and wiring. Replace if cracked, broken, or missing to restore appearance and shield parts.

If your refrigerator isn't cooling properly or cycles too frequently, the accumulator may need replacement. Protects the compressor from liquid refrigerant.

Replace your refrigerator's support bracket if cracked, broken, or missing. This structural component installs inside the cabinet to secure parts.

Replacement holder for your refrigerator interior. Installs to secure components in place. Order now if your original holder is cracked, broken, or missing.

Refrigerator door handle attaches to the exterior door for opening and closing. Replace if cracked, broken, loose, or missing for proper door operation.

Reinforces and secures refrigerator components to reduce movement and maintain alignment. Replaces broken, cracked, or missing brackets that cause loose or rattling parts.

Replacement door stop for your refrigerator. Installs on the door or cabinet to prevent damage. Order a new stop if yours is broken, cracked, or missing.

Supports the refrigerator door hinge for smooth, quiet opening and proper alignment. Replace if door catches, squeaks, or binds. Verify fit with your model.

The Motor is an OEM part for Bosch refrigerators. This motor is specifically designed to power the ice dispenser mechanism, allowing for the convenient dispensing of ice cubes or crushed ice. It delivers the necessary power to rotate the dispenser auger, providing you with a steady supply of ice whenever you need it.

A bad motor can occur due to wear and tear, electrical malfunctions, or motor failure. Signs of a faulty motor include the ice dispenser not working, the auger not rotating, or unusual grinding or buzzing noises during ice dispensing.

Symptoms of a bad motor include:

• Inability to dispense ice  
• Noisy or erratic operation 

Replace your malfunctioning or worn-out ice dispenser motor with this genuine OEM Bosch part to restore your refrigerator's ice dispenser. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

Water dispenser outlet for your refrigerator. Installs at the dispenser to direct water flow. Replace if cracked, broken, or leaking around the outlet.

This support is a replacement mounting bracket that secures internal components and keeps assemblies aligned for reliable operation. It restores proper component support to reduce movement and abnormal noise. What it does:

• Holds and stabilizes an internal assembly or panel to prevent sagging or misalignment
• Helps eliminate rattling or knocking caused by loose or broken supports
• Restores correct alignment for connected parts to ensure smooth operation
• Prevents further wear by keeping components properly positioned during use

• Designed to replace a worn or damaged support; inspect adjacent hardware for wear before installing
• Remove power and follow manufacturer's safety procedures before servicing
• Installation may require basic hand tools; handle plastic parts carefully to avoid cracking
• Reassemble panels and test function after installation

This replacement lid restores the appliance's finished top cover, protecting internal components and helping the door/hatch close properly. Use when the original lid is cracked, warped, or missing to keep the unit looking and operating as intended. What it does:

• Covers and protects the appliance's top/opening area from debris and damage.
• Secures to existing hinge or mounting points to ensure proper closure.
• Replace if you see visible cracks, chips, warping, or if the lid no longer latches or aligns.
• Helps prevent rattling or rubbing caused by a damaged or loose lid.

• Disconnect power (and water, if applicable) before starting any repair.
• Handle edges carefully; some lids include glass or thin sheet material that can chip.
• Basic hand tools (screwdriver/torx) may be required; keep mounting hardware if reusing.

Routes water between refrigerator components. Replace if cracked, leaking, or damaged to restore proper flow. Verify fit with your model number.

This replacement access cover restores a clean, finished appearance and protects internal components behind the appliance panel. It securely snaps or screws into place to keep wiring and parts shielded from debris. What it does

• Covers and protects internal components behind a service access or control area
• Prevents dust and debris from entering sensitive openings
• Helps stop rattling or vibration caused by a missing or damaged cover
• Restores a flush, finished look to the appliance exterior

• Disconnect power to the appliance before removing panels or working near electrical components
• Remove any retaining screws or disengage clips to access and replace the cover
• Align tabs/clips and press or fasten securely until the cover sits flush