Parts for Crosley CRT206QB5: Door Parts

Creates an airtight seal to keep cold air in and moisture out. Replace if torn, worn, or causing the door to pop open. Confirm fit with your model.

Seals freezer door to prevent air leaks and maintain temperature. Replace if door won't stay closed or gasket is torn. Confirm fit with your model number.

Seals refrigerator door to maintain cold air circulation and energy efficiency. Replace when cracked, torn, or worn to prevent condensation.

Seals the refrigerator door to prevent cold air loss and maintain efficiency. Replace if torn, cracked, or not sealing properly. Verify fit by model.

The Dairy Door is an OEM replacement part for  Frigidaire side-by-side refrigerators. Located inside the fresh food compartment, it provides a dedicated storage area for milk, yogurt, cheese and other dairy products requiring colder temperatures. The door measures approximately 9 inches wide and 5 inches high.

Causes of a bad dairy door include normal wear from repeated opening and closing over time. Exposure to spills inside the refrigerator can also potentially damage door shelf components or seals.

Symptoms of a bad dairy door are: 

• Difficulty opening or closing the door smoothly  
• Door alignment issues where it does not sit flush in the frame
• Leaks or moisture inside the dairy storage area
• Damage or cracks in shelf supports or gasket seals

This OEM part is also compatible with models from brands like Electrolux, Gibson, and Kelvinator brand models.

NOTE: For white use 240337701

This small black plug/button covers a hinge or bearing access hole to restore a finished appearance and help keep out dirt and debris. It's a simple, inexpensive trim piece that maintains the appliance's look and helps protect internal components. What it does:

• Covers exposed hinge or bearing access holes for a clean, finished appearance
• Helps keep dust and debris out of hinge or bearing cavities
• Prevents snagging and reduces the chance of small items entering the opening
• Matches factory appearance and fit for a seamless repair

• Push-fit design; press into the hole until fully seated
• Keep away from small children — small part is a choking hazard

Control panel button won't respond? This push button restores tactile control on your refrigerator. Snaps into place for a factory-fit repair in minutes.

Color: White. Used to cover the hinge bearing hole.

Complete freezer door assembly for top-mount refrigerators. Replaces cracked, dented, or damaged outer door panels that cannot be repaired separately.

Replaces damaged or warped freezer door panel to restore proper seal and cold retention. Confirm compatibility with your refrigerator model before ordering.

Replace missing, faded, or damaged labels on your refrigerator. This adhesive label restores cosmetic appearance and model identification on exterior surfaces.

Limits refrigerator door opening range to prevent overextension and hinge damage. Replace worn or broken stops to restore controlled movement.

Limits refrigerator door swing to prevent overextension and protect hinges. Replace if cracked, broken, or missing to restore controlled door movement.

Limits door opening angle to prevent overextension and cabinet strikes. Replace if worn, broken, or missing to restore controlled door travel.

Plastic door stop that cushions refrigerator door closure and prevents impact damage to walls or cabinets. Replace if cracked, broken, or missing.

Black plug button that covers exposed holes or openings in refrigerator doors and panels. Restores a finished look and keeps dirt out of unused mounting holes.

Gray plastic plug button that covers screw holes on refrigerator exterior panels. Replace missing, cracked, or discolored plugs for a clean finish.

Color: White

This stainless-steel refrigerator door replaces a damaged or dented outer door to restore appearance and proper sealing. It provides the exterior panel and mounting surfaces needed to secure door trim, handle, and gaskets. What it does:

• Replaces the outer fresh-food door panel so the fridge closes evenly and looks like new
• Restores the mounting surface for handles, trims, and door gaskets
• Helps stop air leaks caused by bent or dented doors, reducing moisture and temperature issues
• Addresses visible dents, scratches, corrosion, or cosmetic damage to the exterior

• One stainless-steel refrigerator outer door panel

• Disconnect power and empty door contents before removal to prevent tipping or injury
• Retain and transfer existing handle, trim, hinge hardware, and gasket unless replacements are supplied
• Inspect hinges and seals during installation; adjust alignment to ensure a proper door seal

Replaces the outer door panel assembly on your top-mount refrigerator. Ideal for fixing dented, rusted, or damaged door surfaces that affect appearance.

Replace your cracked, broken, or worn refrigerator door handle set to restore secure opening and closing while improving appearance. Direct-fit design.

Replace your cracked, broken, or worn refrigerator door handle set to restore secure opening and closing while improving appearance. Direct-fit design.

Black plastic exterior door handle for top-mount refrigerators. Replace broken, cracked, or missing handles. Mounts with screws at top, clips at bottom.

The Door Handle is an OEM part compatible with Frigidaire refrigerators. This component serves as the primary means of opening and closing the refrigerator door, offering both functionality and aesthetic appeal. This handle measures approximately 17 x 1".  This white handle comes with block 218396700

Symptoms of needing to replace the door handle include:

• The handle becoming loose, wobbly, or detached from the door
• Cracks, chips, or other visible damage to the handle
• Difficulty in gripping or operating the handle smoothly

Causes of a faulty door handle can include physical impact or mishandling during use or cleaning, general wear and tear over extended periods, or issues with the internal mounting hardware or mechanisms.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models. 

Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.

The Screw is an OEM part for Frigidaire appliances. This specific screw is designed for Frigidaire models, ensuring a secure fit and proper function in the appliance assembly. Screws like this one are critical for holding components together tightly, contributing to the overall stability and durability of the appliance. Whether used in refrigerators, ovens, washers, or dryers, this screw plays a pivotal role in assembly and maintenance tasks, ensuring parts remain securely fastened during operation.

Over time, screws can become loose, stripped, or lost during repairs or adjustments, potentially compromising the appliance's integrity and performance.  

Symptoms of needing replacement screws include:

• Loose parts or panels on the appliance
• Difficulty in securing components during assembly or maintenance
• The need to replace lost or damaged screws during repair work

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Screw Kit is an OEM part for Frigidaire appliances. It contains various screws specifically designed to fit and secure different components of Frigidaire appliances, ensuring a tight and secure assembly. This kit is essential for both initial installations and for making repairs or replacements to existing appliances, providing the necessary hardware to maintain or restore the structural integrity of your appliance.  These screws are #10-16 x .500 inches long and can be loosened or tightened using either a Phillips-head or square-head screwdriver.

Symptoms of needing a new Screw Kit include:

• Loose components or panels on your appliance due to missing or damaged screws.
• Inability to securely fasten parts during assembly or repairs, which can lead to operational issues or safety hazards.
• Screws stripping or corroding over time, which can compromise the stability and durability of the appliance.

Causes for replacing screws can include mechanical stress that causes screws to loosen or fall out, environmental factors like moisture leading to corrosion, or accidental damage during cleaning or maintenance.

This screw kit is designed to be universally compatible with various Frigidaire models, ensuring that you have the right screws for a range of repair needs.

Nylon bearing that fits on the door hinge pivot point. Replace when worn, cracked, or missing to prevent door sagging and alignment issues.

Refrigerator door hinge bearing provides smooth pivot action for proper door operation. Replace if door sags, sticks, or pops open. Confirm fit with your model number.

Replacement door shelf bin for refrigerator doors. Installs on door to store condiments and bottles. Order if your original bin is cracked or broken.

Replace your cracked, broken, or missing refrigerator door bin. This shelf installs on the door to hold bottles, jars, and condiments securely in place.

Replace your cracked, broken, or missing refrigerator door bin. Snaps into place on the door interior for storing condiments, jars, and bottles.

Replace your broken, cracked, or missing freezer door shelf. This storage bin installs in the freezer door to organize frozen items. Easy snap-in install.

Plastic mounting block that anchors the refrigerator door handle assembly. Replace if cracked, broken, or causing a loose handle from repeated use.

Specs: 10-16 X 0.500

This part number contains one (1) screw.

Secures door handle to refrigerator door. Replace if missing, stripped, rusted, or corroded from regular use. Essential hardware for handle installation.