Parts for Frigidaire FFHT1514QS5: Door Parts

Freezer door gasket creates an airtight seal to prevent air leaks, frost buildup, and temperature loss. Replace when worn or damaged. Confirm fit.

Rubber seal that lines your freezer door perimeter to maintain insulation and prevent warm air entry. Replace if door won't seal or frost builds up inside.

Creates an airtight seal to maintain temperature and prevent frost buildup. Replace when worn, cracked, or door won't close properly. Verify fit with model number.

Seals refrigerator door to keep cold air in and warm air out. Replace when torn, cracked, or not sealing properly. Confirm fit with your model number.

Door shelf bar mounts inside your refrigerator door to hold and organize items. Replace this rail if cracked, broken, or missing from daily use.

Replacement door shelf bar for refrigerator doors. Snaps into place to hold bottles, jars, and condiments securely. Needed when original is cracked or broken.

The Door Rack is an OEM part compatible with Frigidaire refrigerators. It is a convenient storage component designed to fit securely inside the refrigerator door, providing additional space for organizing and storing items.This rack is white in color and measures about 23 inches wide by 3 inches high by 5 inches deep. 

Causes of needing to replace a door rack can include damage from mishandling or impact, wear and tear over time, or the desire to upgrade or customize the interior organization of the refrigerator.

Symptoms indicating it's time for a new door rack include:

• Cracks, breaks, or visible damage to the rack or shelves
• Difficulty in sliding or removing the rack from the door
• Inability to securely hold or support items placed on the rack

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.

The Dairy Door is an OEM replacement part for  Frigidaire side-by-side refrigerators. Located inside the fresh food compartment, it provides a dedicated storage area for milk, yogurt, cheese and other dairy products requiring colder temperatures. The door measures approximately 9 inches wide and 5 inches high.

Causes of a bad dairy door include normal wear from repeated opening and closing over time. Exposure to spills inside the refrigerator can also potentially damage door shelf components or seals.

Symptoms of a bad dairy door are: 

• Difficulty opening or closing the door smoothly  
• Door alignment issues where it does not sit flush in the frame
• Leaks or moisture inside the dairy storage area
• Damage or cracks in shelf supports or gasket seals

This OEM part is also compatible with models from brands like Electrolux, Gibson, and Kelvinator brand models.

NOTE: For white use 240337701

Replace a cracked, broken, or missing door rack in your refrigerator. Snaps into place on the door to hold bottles, jars, and condiments securely.

This small black plug/button covers a hinge or bearing access hole to restore a finished appearance and help keep out dirt and debris. It's a simple, inexpensive trim piece that maintains the appliance's look and helps protect internal components. What it does:

• Covers exposed hinge or bearing access holes for a clean, finished appearance
• Helps keep dust and debris out of hinge or bearing cavities
• Prevents snagging and reduces the chance of small items entering the opening
• Matches factory appearance and fit for a seamless repair

• Push-fit design; press into the hole until fully seated
• Keep away from small children — small part is a choking hazard

Control panel button won't respond? This push button restores tactile control on your refrigerator. Snaps into place for a factory-fit repair in minutes.

Color: White. Used to cover the hinge bearing hole.

Replace your damaged or dented freezer door panel to restore appearance and maintain a proper cold seal. Confirm fit with your refrigerator model number.

Replace your damaged, dented, or cracked refrigerator freezer door assembly. Restores proper insulation and appearance when the original door is broken or worn.

Replacement nameplate that restores your refrigerator's factory identification label. Adhesive-backed plate needed when original is faded, damaged, or missing.

Limits refrigerator door opening range to prevent overextension and hinge damage. Replace worn or broken stops to restore controlled movement.

Limits refrigerator door swing to prevent overextension and protect hinges. Replace if cracked, broken, or missing to restore controlled door movement.

Limits door opening angle to prevent overextension and cabinet strikes. Replace if worn, broken, or missing to restore controlled door travel.

Plastic door stop that cushions refrigerator door closure and prevents impact damage to walls or cabinets. Replace if cracked, broken, or missing.

Black plug button that covers exposed holes or openings in refrigerator doors and panels. Restores a finished look and keeps dirt out of unused mounting holes.

Gray plastic plug button that covers screw holes on refrigerator exterior panels. Replace missing, cracked, or discolored plugs for a clean finish.

Color: White

Complete refrigerator door assembly for top-mount models. Replacement needed when door is cracked, damaged, warped, or seals are permanently worn.

Replacement handle set for refrigerator doors. Installs on fresh food and freezer compartments. Needed when original handles crack, break, or snap off.

Replacement handle set for refrigerator doors. Installs on fresh food and freezer compartments. Needed when original handles crack, break, or snap off.

Replacement handle set for refrigerator and freezer doors. Includes both handles. Needed when handles are cracked, broken, or missing from use or impact.

Replacement handle set for refrigerator and freezer doors. Includes both handles. Needed when handles are cracked, broken, or missing from use or impact.

Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.

Specs: 10-16 X 0.500

The Screw Kit is an OEM part for Frigidaire appliances. It contains various screws specifically designed to fit and secure different components of Frigidaire appliances, ensuring a tight and secure assembly. This kit is essential for both initial installations and for making repairs or replacements to existing appliances, providing the necessary hardware to maintain or restore the structural integrity of your appliance.  These screws are #10-16 x .500 inches long and can be loosened or tightened using either a Phillips-head or square-head screwdriver.

Symptoms of needing a new Screw Kit include:

• Loose components or panels on your appliance due to missing or damaged screws.
• Inability to securely fasten parts during assembly or repairs, which can lead to operational issues or safety hazards.
• Screws stripping or corroding over time, which can compromise the stability and durability of the appliance.

Causes for replacing screws can include mechanical stress that causes screws to loosen or fall out, environmental factors like moisture leading to corrosion, or accidental damage during cleaning or maintenance.

This screw kit is designed to be universally compatible with various Frigidaire models, ensuring that you have the right screws for a range of repair needs.

Nylon bearing that fits on the door hinge pivot point. Replace when worn, cracked, or missing to prevent door sagging and alignment issues.

Refrigerator door hinge bearing provides smooth pivot action for proper door operation. Replace if door sags, sticks, or pops open. Confirm fit with your model number.