Parts for Bosch WFMC2201UC/15: Door / Top Panel Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Rear case panel for washers. Covers and protects internal components at the back of the machine. Replace if cracked, damaged, or missing.

Shipping bolt kit secures washer drum during transport. Includes bolt, washer, and sleeve. Replace if missing, stripped, or lost before moving your washer.

This cover protects internal components and provides a finished appearance. Replace if cracked, broken, or missing to restore proper enclosure.

The Screw is an OEM part for Bosch microwave ovens. It is a component that secures the outer casing and front paneling of the microwave. The screw is designed to withstand repeated heating and cooling cycles without loosening or degrading. 

Symptoms of bad screw include:

- The front panel or outer casing becoming loose, detached, or misaligned
- Gaps appearing in the seams or joints of the microwave structure
- The door not sealing properly leading to leaks

Over many uses of the microwave, screws can wear down or strip out from over-tightening during repairs or installations. It is important to replace worn screws to ensure the microwave maintains an intact structure.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

This installation set provides the hardware needed to mount and connect a compatible appliance, helping ensure a secure fit and correct hookups during installation. Designed as the ready-to-use kit installers expect. What it does:

• Provides the mounting and connection hardware used during appliance installation
• Helps prevent loose fittings and reduce leaks caused by improperly secured components
• Useful when original installation parts are missing or damaged
• Supports a proper, stable installation for safe operation

• Follow the appliance's installation instructions and local codes when installing this kit
• Turn off power and water supply before beginning work
• Use appropriate tools and verify all connections are tight and leak-free after installation

2 included - Front load

Replacement leveling foot supports and levels your washer for steady operation. Install this foot if yours is worn, cracked, or missing to restore balance.

The Lock is an OEM replacement part for Bosch front-loading washers. Securing mechanisms through customized openings prevents loads from rolling freely during spinning, maintaining optimal programmed processes. Reliable retention enhances cleaning consistency.

Causes of a bad lock can involve deterioration of locking pawls or supporting rails over many cycles of engaging and disengaging weekly. Protruding lock parts also risk impact damage from overfilled loads.

Symptoms of a bad lock include: 

• Inability to prevent tub contents from spinning unrestrained   
• Loose articles migrating from their intended placement within  
• Door failures to lock closed fully during active cycles
• Premature component wear transferring vibrations to cabinetry

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This suspension rod supports and stabilizes the washer drum assembly. Replace if your rod is bent, broken, or missing to restore proper drum support.

Mounting bracket for washer installations. Secures and stabilizes washer components. Replace if bent, cracked, or broken to restore proper support.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Secures your washer door and provides the pivot point for smooth opening and closing. Replace if hinge is cracked, broken, or causing door sagging or misalignment.

Replacement screw for securing panels, brackets, and components in washers, dryers, and other appliances. Needed when original screws are rusted, stripped, or missing.

This sleeve is a small guide/bushing used in select Bosch-built appliances. It spaces and supports a moving component to keep it aligned and reduce friction, helping the mechanism operate smoothly and quietly.

• Acts as a bushing/spacer around a pin or shaft to guide motion
• Helps maintain alignment of connected parts
• Reduces friction and wear between mating surfaces
• A worn or missing sleeve can cause wobble, rough movement, or squeaking/clicking noises

• Disconnect power and shut off water before servicing
• Note the sleeve's orientation and seated depth during removal to match on installation
• Inspect the mating pin/shaft and surrounding parts; replace if worn for best fit
• Verify smooth movement by hand before reassembly and testing

The Cover is an OEM part for Bosch washing machines. This part covers and protects the door hinge mechanism, maintaining the sleek appearance of the appliance while preventing dust, lint, and moisture from compromising the hinge's functionality.  

Causes for the need to replace the Cover often stem from physical impacts during loading or unloading, general wear over time, or exposure to harsh cleaning chemicals that can degrade the material of the cover.

Symptoms of a bad Cover include:

• Visible cracks or breakage that can lead to moisture and debris entering the hinge area.
• A loose fit, which may cause noise during operation or interfere with the door's ability to close properly.
• Wear and tear that diminishes the aesthetic appeal of the appliance, making it look outdated or poorly maintained.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This factory fastener secures appliance components and panels so they stay aligned and quiet. Replacing a missing, stripped, or corroded screw restores a tight fit and helps prevent vibration, rattling, and premature wear.

• Secures brackets, covers, panels, or internal parts per your model's design
• Helps maintain alignment and reduce vibration/noise during operation
• Replaces lost, stripped, rusted, or damaged hardware
• Common signs include loose or shifting panels, rattling sounds, or a missing screw found during service

• Disconnect power before servicing; shut off water or gas if applicable to your appliance
• Match the screw to the original location/length; replace one at a time to avoid mix-ups
• Start threads by hand to prevent cross-threading; tighten snugly without overtightening
• Use the correct driver for the head type on your model to avoid stripping

Fix a washer that won't start or stops mid-cycle with a faulty door lock. This mechanical locking assembly secures the door during wash cycles.

Hook plate for washer models. Secures internal components in place. Replace if cracked, broken, or missing to restore proper assembly and function.

Replacement screw secures appliance panels, brackets, and internal components. Install when original is stripped, missing, or corroded for proper alignment.

Replaces the outer door panel on your washer. Install when dented, scratched, or corroded to restore appearance and ensure proper door closure and seal.

Flat mounting washer that sits under screws or bolts to distribute load and maintain proper spacing. Replace if cracked, bent, or missing.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.