Parts for Ge EDW6000L15BB: 01 - Escutcheon & Door Assembly Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Foam insulation block for dishwasher doors. Reduces noise and improves energy efficiency. Replace if cracked, compressed, or missing for proper sound dampening.

Replacement 8-18 x 9/16 machine screw for securing panels, brackets, and internal components. Needed when fasteners are stripped, missing, or worn.

Spring that provides closing tension for the refrigerator water/ice dispenser door flap. Keeps the dispenser sealed when not in use. Replace if door hangs open or won't close.

The GE latch handle is an OEM replacement part responsible for allowing the opening and closing of the dishwasher door. Located on the inner door panel, this part ensures that the dishwasher door latches securely when the machine is in operation, preventing any leaks or disruptions in the cleaning process. Additionally, it provides a convenient means for users to open and close the dishwasher, allowing easy access to load and unload dishes.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This part fixes the following symptoms

• Difficulty in opening or closing the dishwasher door.
• The door not staying securely closed during a wash cycle.
• Visible damage to the latch handle.

Dishwasher won't start or stops mid-cycle? This door interlock switch detects when the door is closed. DIY repair in about 5-10 minutes with a screwdriver.

Door won't open or handle feels loose? The handle actuator links your dishwasher handle to the latch. Easy DIY repair, typically under 1 hour with video.

Replacement mounting screw for dishwasher door panels, control assemblies, and internal components. Needed when original screws are stripped, rusted, or missing.

Detergent door won't stay closed or latch broken? This dishwasher dispenser releases soap and rinse aid during cycles. DIY repair in 20-30 minutes.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Color: blue-gray. It measures about 1-1/2 inches in diameter.

This mounting bracket secures the dishwasher rinse module/dispenser assembly so the dispenser stays properly positioned for reliable rinse-aid delivery. A correctly seated bracket helps prevent dispenser misalignment and related rinse-aid issues. What it does:

• Holds the rinse module/dispenser firmly in place inside the dishwasher tub or door
• Keeps the dispenser aligned so rinse aid can be released as designed
• Helps prevent dispenser rattling, shifting, or partial seating during cycles
• Can reduce symptoms like poor rinsing, visible spots, or uneven rinse-aid release

• Disconnect power to the appliance before starting any work for safety
• Basic hand tools (screwdriver, nut driver) are typically needed; follow OEM instructions
• Align the bracket and secure fasteners without over-tightening to avoid damage

The GE screw is an OEM replacement part responsible for securing various components and parts of the dishwasher together. The screw is designed to provide a tight and secure connection for different panels, brackets, or other elements within the dishwasher. It plays a crucial role in maintaining the structural integrity of the appliance by preventing loose parts.

Common causes of a bad screw can include regular wear and tear from frequent use, exposure to moisture leading to corrosion, or damage from over-tightening. A compromised screw can result in loose or unstable components, which can affect the dishwasher's performance and safety.

Symptoms of a bad screw include:

• Loose or wobbly components within the dishwasher
• Difficulty in securing parts properly
• Visible rust or corrosion on the screw
• The screw head being stripped or damaged

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replacement mounting screw for dishwashers. Secures internal components and panels. Order a new screw if yours is stripped, missing, or damaged.

Replacement spring for dishwasher door latch mechanism. Provides tension to keep plunger engaged. Replace if broken, lost, or stretched during repair.

Prevents leaks by sealing the bottom of your dishwasher door. Replace if water leaks during cycles or rubber shows wear. Verify fit with your model number.

Directs airflow inside the dishwasher door to maintain proper venting. Replace if cracked, broken, or foam is damaged to prevent moisture buildup.

Color: Black

Fix a dishwasher stuck in wash cycle, showing error codes, or not advancing between cycles. This electronic control board restores cycle selection and timing.

Replaces the brace escutcheon that clips onto the top inside of the dishwasher inner door panel. Order a new one if yours is cracked or broken.

Includes 12 screws.

Panel support clip kit for dishwashers. Secures and stabilizes inner panels. Replace if panels rattle or become loose. Confirm fit with your model number.

The Interlock Switch Plunger is an OEM part for GE dishwashers. This component works with the door latch to ensure the dishwasher operates only when the door is securely closed, providing safety and preventing water leaks.

Over time, the interlock switch plunger can wear out or become damaged due to repeated use, mechanical stress, or debris buildup. Causes of a bad interlock switch plunger include frequent door openings and closings, misalignment of the door latch, and exposure to moisture.

Symptoms of a bad interlock switch plunger include:

• The dishwasher not starting or stopping unexpectedly
• Error codes related to door lock issues
• The dishwasher door not closing properly or securely
• The dishwasher operating even when the door is slightly open

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Interlock Switch Cover is an OEM part for GE dishwashers. It is designed to protect the interlock switch, which ensures the dishwasher operates only when the door is securely closed.

Causes of a bad interlock switch cover can include wear and tear over time, accidental damage during loading or unloading, or exposure to moisture and detergent that can degrade the cover's material.

Symptoms of a bad Interlock Switch Cover include:

• Dishwasher not starting or stopping unexpectedly
• Visible damage or wear on the cover
• The door not latching properly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.