Parts for Ge GDWT708V55BB: Escutcheon & Door Assembly Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Hex washer head screw for dishwashers. Secures internal components and panels. Replace if screw is stripped, missing, or no longer holds parts firmly.

Fix dishwashers with unresponsive controls or display issues. This wire harness connects the control panel to the main board. Moderate difficulty repair.

Water hardness test strip tool for dishwashers. Tests mineral content in tap water to help determine optimal detergent and rinse aid settings.

Fix a dishwasher that stops mid-cycle or shuts down after 20-30 minutes. This thermostat kit regulates water temperature for proper heating and drying.

Fix a dishwasher that stops mid-cycle or shuts down after 20-30 minutes. This thermostat kit regulates water temperature for proper heating and drying.

A self-tapping 10-24 x 1/2" screw used to secure appliance panels and internal components. Simple replacement to restore proper fastening and stop rattles or loose parts. What it does:

• Fastens panels, brackets, and small assemblies where a 10-24 tapped hole or nut is required
• Replaces missing or stripped screws that cause loose or vibrating panels
• Restores proper alignment and secure mounting of controls and trim
• Works in metal or reinforced plastic mating surfaces designed for 10-24 threads

• Unplug or disconnect power before accessing internal components
• Use the correct size driver (Phillips/hex depending on head) and start straight to avoid cross-threading
• Tighten until secure; avoid over-torquing which can strip threads or damage parts

Fix a broken or loose dishwasher door handle that won't stay closed or feels wobbly. This replacement handle restores proper door operation in 15-30 minutes.

Replacement mounting screw for dishwashers. Secures components and panels inside the unit. Order a new screw if yours is stripped, missing, or damaged.

The Blower Motor Assembly is an OEM part for GE dishwashers. This part is responsible for driving the dishwasher's venting system, which plays a key role in the drying process of your dishes.

Over time, the Blower Motor Assembly may need replacement due to wear and tear, damage, or failure. A malfunctioning blower motor can lead to ineffective drying of dishes, increased cycle times, or the dishwasher failing to complete its drying cycle properly.

Symptoms of a bad Blower Motor Assembly include:

• Dishes remaining damp or wet even after the drying cycle is complete.
• Unusual noises coming from the dishwasher, indicating that the blower motor is struggling to operate.
• The dishwasher stopping or pausing during the drying cycle.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This inlet transition is a molded connector that fits between the appliance cabinet and the inlet opening to guide incoming air and help maintain a sealed airflow path. It restores proper fit and reduces air leakage where the inlet meets the cabinet. What it does:

• Provides a finished, secure connection at the appliance inlet to direct airflow into the unit
• Helps reduce air leaks that can reduce drying/heating performance or cause airflow imbalance
• Replaces worn, cracked or broken inlet trim that can rattle or vibrate during operation
• Restores correct clearance and sealing where the inlet joins the cabinet

• One inlet transition piece

• Basic hand tools typically required; access the inlet area by removing the back panel or service panel as applicable
• Handle carefully to avoid bending or damaging adjacent trim and mounting tabs
• Disconnect power (and gas if applicable) before beginning service; follow all safety precautions in the appliance manual
• If mounting hardware is missing or damaged, replace with OEM-specified fasteners for secure fit

Replaces the lower access panel on your dishwasher to restore a finished look and protect internal components. Needed when cracked, damaged, or missing.

Dishwasher won't start or run? A faulty door latch prevents cycles from beginning. This assembly secures the door and engages the safety switch. DIY fix.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Detergent door won't stay closed or latch broken? This dishwasher dispenser releases soap and rinse aid during cycles. DIY repair in 20-30 minutes.

Replacement cap that seals the rinse aid dispenser on your dishwasher door. Replace if cracked, broken, warped from heat, or missing to prevent leaks.

Secures the detergent dispenser to the dishwasher inner door panel. Replace if cracked, broken, or rusted to restore proper alignment and mounting.

Replaces a cracked, broken, or missing dishwasher vent cover that mounts on the inner door panel. Shields the exhaust opening and directs airflow.

Replace your dishwasher's worn door hinge arm bearing to restore smooth opening and secure alignment. Fixes binding, noise, and sagging doors. Confirm fit.

Replacement screw for dishwasher assembly. Used to secure various components and panels. Needed when original screw is stripped, missing, or damaged.

This vent flapper is the exterior exhaust flap that opens to let dryer air and lint exit and closes to keep weather, pests and drafts out when the dryer is off. It restores proper airflow at the outside vent hood. What it does:

• Opens with dryer airflow to allow exhaust to escape and closes when idle to block outside air.
• Helps prevent backdrafts, pests and rain from entering the vent system.
• Can restore normal drying performance when a stuck or broken flap was restricting airflow.
• Commonly replaced when the flap is cracked, warped, jammed or does not seal.

• One vent flapper/exterior exhaust flap.

• Disconnect power to the dryer (and gas supply if applicable) and work from the outside hood when possible.
• Remove the exterior vent hood or access cover to inspect and replace the flap; basic hand tools required.
• Check that the flap moves freely after installation and seats against its seal to prevent air leaks.
• Clean or repair the ductwork to avoid repeat failures.

Replace your dishwasher's detergent dispenser assembly if it won't open, leaks, or doesn't release soap properly. Verify fit with your model number.

Cap assembly for dishwasher door. Installs on the interior door panel to seal openings. Replace if cap is missing, cracked, or broken during shipping.

This lock nut assembly kit replaces a worn or missing locking nut that secures threaded fasteners on dishwasher components. It restores secure fastening to help stop movement, noise, or loose panels. What it does:

• Provides a threaded locking nut that holds mating fasteners in place on dishwasher assemblies
• Helps prevent loosening from vibration that can cause rattling or misalignment
• Commonly used where a nut must resist backing off without adhesive
• Compatible with the original mounting locations that use a captive/locking nut design

• Disconnect power to the dishwasher before accessing internal components
• Verify you are replacing the exact nut for the affected mounting point; hand-start threads to avoid cross-threading
• Tighten securely but avoid overtightening to prevent thread or component damage
• Keep track of screws and fasteners and test operation after reassembly

Fix a dishwasher with no lights or non-functioning control panel. This control module assembly restores power to the tactile board and keypad functions.

Grinding noise during drying cycle? This vent door actuator opens and closes the dishwasher vent for proper airflow. Easy DIY fix, one screw install.

Stainless steel mounting screw for dishwashers. Secures panels, brackets, and internal components. Replace if stripped, corroded, or missing.

Replacement mounting screw for dishwashers. Secures internal components and panels. Order a new screw if yours is stripped, missing, or damaged.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.